Universal Laser Quick Start Tutorial with Corel Draw

Рет қаралды 107,577

Amtek Company

Күн бұрын

Пікірлер: 28

@djeteks 8 жыл бұрын

found this very helpful. thanks so much.

@carlomagno3827 3 жыл бұрын

Very good video thanks. I have a VL200 versalaser and I am having problems configuring corel draw, what do you suggest? or if you have one you could make a setup video in core draw. Thank you

@toggyuel 4 жыл бұрын

Great video

@kristinlinde5827 3 жыл бұрын

Can you use Corel Draw Essentials 2021 to run the jobs to the laser? Also, what setting would you use for cardboard, as that isn't a material listed in the UCP.

@Kasiawrestling 3 жыл бұрын

I'm running corel x7 and can't figure out how to turn off color management. Any tips?

@Sprenklefish 7 жыл бұрын

Its still a bit unclear as to how you get your laser to engrave on your material with complete accuracy. It all seems to be very hit or miss. Is there a process to hit your design dead nuts on your material? Great video, the best I've seen on this machine on KZbin, but a bit more info would help.

@AmtekCompany 7 жыл бұрын

Great idea for another video. What I typically do first is draw a box that represents the exact size of the material I want to put the image on in Corel. So if I am trying to center a graphic on the back of a phone, I'll get the dimensions of the phone and create a rectangle that represents it. Then I will put a piece of material in the machine, butt it up against the rulers, and cut that shape out of it. Next, remove the material you just cut out and place the phone down in the material in the empty space that remains. Back in the software, I will center the graphic in the rectangle I used to cut the material, then delete the rectangle or change it to a different color and tell the laser's driver to skip that color. As long as your material did not move, you can be certain the graphic will be centered properly.

@thebigu01 3 жыл бұрын

can you please send the ups.cpl file again, the link in the comments is not working right

@bettydaltonnewbold2019 Жыл бұрын

Where does the ULS.cpl come from? Thank you.

@AmtekCompany Жыл бұрын

You could contact Universal Laser's Support team and they should be able to get it to you: www.ulsinc.com/contact-us

@takaradesigns1651 4 жыл бұрын

I’m still having problems engraving a bit deeper ... Can you suggest a resolution?? Thanks 😊

@AmtekCompany 4 жыл бұрын

Going deeper is simply a matter of either adding more power, slowing it down, or a combination. If you've done these things and it isn't going deeper, you should check your optics to ensure they are clean and not damaged, check your focus, and verify your laser tube's output has not dropped off.

@gloriaegbi5917 5 жыл бұрын

I love it

@mannetjie42890 9 жыл бұрын

i have a neje 500 mw laser can I use corel on it and wat corel can I use if U can help me it desk top laser and weer can I down load it from

@juliansen6757 7 жыл бұрын

What Version of CorelDraw can i use? We have a ULS in our Coworking-Space and they use CD x4. I want tu have my own Programm on my Laptop. Can i use a later Version and send it to the Laser?

@AmtekCompany 7 жыл бұрын

Yes. Any version of Corel Draw should work. You can also use Adobe Illustrator or a CAD package such as SolidWorks or AutoCAD. The key is that the software needs to output vector data. Software such as Photoshop or Inkscape rasterize the output, so you will not be able to get the vector cut and vector engrave functions to work straight out of those packages.