Universal Track Saw - Affordable Option Or Waste Of Money?

Tracksaws are awesome but pricey. In this video, I look at a cost-effective alternative to expensive track saw setups.
One size fits all.
The Milescraft Track Saw Guide can also be an option for someone who already owns a circular saw and would like to upgrade to a track guide system.
A big thank you to HARDWARE CENTRE and KRESS TOOLS for the kit that allowed me to do this review.
Hardware Centre:
hardwarecentre.co.za/
Milescraft Track Guide:
hardwarecentre.co.za/product/...
Kress Tools SA:
kresstools.co.za/
GET PLANS!
thewoodworkersplans.com/
Check it out on AMAZON:
amzn.to/3RQonSh
To support my channel visit one of our merch stores:
USA - teespring.com/stores/woodshop...
EU - teespring.com/stores/woodshop...
Or follow my projects on social media:
Facebook: / woodworkjunkiesite
Instagram: / woodworkjunkie
Check Out My Gear (Affiliate):
USA - www.amazon.com/shop/woodshopj...
UK - www.amazon.co.uk/shop/woodsho...
Some product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support.
Disclaimer.
All of the videos on this channel are intended for entertainment purposes only.
Should you choose to make or do anything as depicted on this channel you would do so at your own risk.
Woodworking and the use of power tools can be extremely dangerous.
The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct.
Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer.
Always use protective gear where applicable and never attempt something you are not comfortable doing.
Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do.
Please, stay safe and work smart.

[@monkeysausageclub]

Don't worry about changing the blade. Even if the new blade has a thicker kerf the track edge is set to the blade's inner edge and this doesn't really change from blade to blade. The kerf thickness goes outward. If that makes sense.

[@rpjames11]

Not necessarily. If you change out the blade to a thinner tooth blade but the blade body is the same then the guide will no longer be accurate. I had the same problem with a DIY saw guide after switching to a new blade.

[@WoLpH]

In my experience the kerf thickness goes both ways. That does mean the issue is only half as big as it could be

[@smashyrashy]

​@rpjames11 what could u possibly need that level of accuracy for

[@WoLpH]

@@smashyrashyIt's not just about accuracy, it also helps with tear-out

[@derekgilbert1752]

When standing behind the saw, if you correctly use the set up guide, the left side of any blade should be at the same place every time. You should be able to put in a dado set and never have the problem of cutting the guide. The left most part of the blade should be up against the guide while the thickness variation will entirely stretch to the right.

[@terencebaker4269]

Excellent review,much better than reviews found elsewhere. I'm going to order one for my DIY cabinet making.

[@steveferguson1232]

Jean, now this is what a product review should be like. Loved it. Very detailed and on point. Great job

[@jasonray3937]

Great review, I really appreciate your thought process and thoroughness. I have used a similar product (Kreg’s AccuCut) on a circular saw, and recently I purchased a Makita track saw. My experience is that the accuracy of the circular saw additions is *slightly* poorer than the real track saw. This is NOT an issue if you are using the track to break down sheet goods but doing final cuts on a table or miter saw. For those that will *only* use a track saw and need the best possible, and repeatable, accuracy definitely get a real track saw. The plunge feature of a real track saw allows you to get the saw fully supported before the cut begins, where the circular saw additions require having the saw off the workpiece to start. Again not a big issue but it does slightly impact accuracy and you definitely want to use the track clamps, which are less necessary on a real track saw. The plunge and easy depth of cut adjustment on a real track saw allow for doing scoring cuts which is a BIG benefit when working with expensive hardwood faced plywood. The cutting strip on the track (either circular addition or track saw) prevent splintering in the “keep” side of the cut, but scoring prevents splintering on the WASTE side, which can save sone wood and eliminates the need to do two cuts to get clean edges on both sides. For me, personally, the biggest benefit of the track saw was dust collection. It is VASTLY superior to any circular saw system. Thanks again for all the great content!

[@richmac918]

Good job, thanks for doing this video. I'm just a weekend warrior and didn't want to invest in a new saw as I already have 3 (two cordless and one corded) and will only be using this to cut down large sheet goods on occasion. This system makes perfect sense for me and now that I know it will actually work I'm going to get one.

[@gregghernandez2714]

Great review. I have seen other reviews of this product and apparently they didn't read the manual. You make the set up look very easy. Milescraft makes pretty good products at a decent price and this is no exception. This would be perfect for anyone who already has a decent circular saw and doesn't want to invest in an expensive track saw. Well done sir.

[@lesblack413]

A very good and unbiased review. What you haven't mentioned is the problem with sawdust extraction. All dedicated plunge saws seem to handle this concern, as well as the ability to plunge cut. I also believe the side adjuster rollers should be rectangular or square to eliminate the rollers jamming up with sawdust. Overall, a good presentation. Cheers!!

[@theidlehandsworkshop3884]

I honestly like how in depth you went with this checking for things like play and what not, I've seen a lot of reviews that left me more confused about track saws than I was to begin with. Many thanks for this and thank you as always for sharing your time and knowledge.

[@csimet]

Looks to be a decent option for folks who do not want to buy a dedicated track saw... well made and packaged (~$100 USD in the states). I agree that for another $10-20 they should have included a carry bag to hold the entire setup and spare parts... perhaps even room for an extra pair of rails you almost certainly will need to get to extend your cuts to full size sheet goods. Most people buy these systems to break down 4x8' sheets and will need a rail that goes out at least 9', meaning four of them will be required. The attachment method for the saw to the base looks a bit flimsy & weak, although understandable, so you need to be very careful when using it and whenever you set the saw down... don't knock it out of alignment. My big issue is that rail length. I realize they split it into two to make shipping easy, but that adds flex points and extra assembly since you will almost always need to put at least the two together (and possibly four). Most standard tracks today come in 55" lengths.

[@jerryquesenberry2520]

I received this item plus extra track this past weekend and honestly I'm disappointed. I treated it with kid gloves & out of 4 total pieces of track, only 2 pieces lined up nicely & one of the other pieces is so tight on one end that you have feel like you have to force the saw thru. All 4 pieces are square to each other when touching end to end but the height of the track varies across the top face at 2 of the 3 junctions. I also tried leaving a very slight gap but that didn't work either. The circular saw base works well with the glide adjusters but the track connections, as noted previously, are the real let down for me. I watched every Milescraft KZbin video I could find before attempting to put the track together but it just didn't work as well as I thought it should. I'll keep it because it was my decision to purchase it but I wouldn't buy it again. These are my thoughts only & if yours works well, I'm glad for you. I wish Milescraft would sell an 8' long piece because I'd be all in on it.

[@Sebastopolmark]

GREAT review. The main comparison would be Kreg or similar manufacturer not Festool as they are in a different class. That being said, I certainly will give this a look. I like that you took the saw off and reinstalled it so we can see that it really is an easy process. For the home sawdust maker, like myself, this is a good option for the occasional track use. Thanks again.

[@carlgradolph9676]

Looks quite similar to the True Trac Saw Guide which I have been using for a few years now with good results. I encourage viewers of this video to check it out. Unlike the Milescraft system reviewed here, its rails come in 24", 48" and 57" (60cm, 120cm, 145cm) lengths. I have been able to make straight cuts on 12' (3.7m) and longer boards; in theory, with all the rails I've purchased. I could go up to 18+ feet (5.5 meters)! They also make and sell router bases that ride on the very same track. FWIW: I'm not in any way affiliated with True Trac.

[@jimwiskus8862]

When adjusting the guide adjusters for the side to side play, if you have an old hack saw blade, it looks like you can slide the teeth of the blade against the guide to prevent it from turning, if that was the concern. Those teeth are directional, so lay the blade in there with the teeth pointing at you. If it's just lining all four the same, set the two end adjusters at the same time using a wooden wedge. Once both are set run a straight edge against the secured screw heads and set the inside two.

[@minnesnowtan9970]

You helped me understand track saw in general. And considering the different dialects and vocabularies we have, I found your review extremely easy to understand and helpful regarding what tools make sense for me. Thank you for your time and expertise!

[@EngineerMikeF]

Removing & reinstalling the saw went remarkably better than I expected

[@LittleShadowWoodcraft]

Thank you very much for this review. This came up as an advertisement a few weeks ago at my local tool supplier and I have been eyeing it up as a potential solution. Great review that answered all my questions!

[@Yackhammer75]

Overall a nice option compared to a dedicated track saw. As far as removing and reinstalling the saw to the base a simple use of the T track between the mounting hold downs would provide a nice area to make your own spacer to simplify reinstalling even more. No need for the blade spacer every time that way. This has probably just made it to my christmas list. Thank you for the review.

[@wearywanderer]

Absolutely the best description on how to set this thing up and get running … I would’ve returned the track if it weren’t for this detailed explanation!

[@Old_Deadeye]

Thanks for a great review on this product. Your product presentation was very well done and your demos and explanations were clear and concise making the video a pleasure to watch. I set my tracksaw guide up today and wanted to watch a few reviews and setup guides to make sure I didn't overlook something and yours is one of the best reviews on this product. 👍

[@Li.Siyuan]

This piece of kit is, by far, the most expensive one of its kind ive ever seen.

[@jasonpeddicord3219]

I have a major project coming up soon. And this looks like the best option other than buying a dedicated track saw just for one project.

[@andre1987eph]

Your photography is excellent. Everything is demonstrated clearly.

[@nicklavioletteiii2183]

I'm a big fan of the product. Just ordered a new set of rails for full length plywood sheet cuts!

[@mrporridge2304]

A really great review thank you Jean! Honest, objective and personally for me, means I don't have to justify paying a crazy amount for a track saw setup! Cheers buddy, good luck! 👍 England are dead in the water... come on the Boks and Fiji! 🏉🇫🇯🇿🇦

[@randybecker7339]

And here I was, looking for an inexpensive track system to attach my Ryobi Circular Saw to and thinking I'd have to spend a huge amount of money just for a straightedge. Thank you! You've saved me a lot on money! Well done.

[@marcellussaunders4200]

I’ve always liked Milescraft products. It would be nice if there were indents to help register the set screws when connecting the 2 pieces.

[@kennethhunt6270]

Hello there, by far that is the best video that I have seen going over the miles track saw. Thank you that really taught me a lot. I have been thinking long time if to buy one, now I am sure I will. Again thank you for the great vieo.

[@johncarter9067]

Seems to be a very good track I have the Kreg universal track and it works well also

[@MrRutabager]

Very informative video. Thank you. I think that your video has gotten me off the fence and I'm going to definitely check local prices for one of these

[@Walkercolt1]

I purchased a Bora track saw kit and the saw sled is all plastic. It seems intended for "full shoe" saws only. My cheap Skil sidewinder has a very narrow shoe and the MilesCraft works much better with it. You have to order from 2 different places, but you can get the MilesCraft for $135 delivered if you search the 'net enough. I use a 60 tooth "finish blade" on my 7 1/4" saw and I have no problems with chipping melanin coated MDF, particle board or "AB" plywood. A 48 or 50 tooth should do almost as well (carbide tipped, of course). HINT: More teeth mean more friction and heat and more "pitch" build-up on your blades. Oven cleaner or blade cleaner prevents burning the cut edge.

[@MCsCreations]

What a fantastic tool, Jean! It works amazingly! 😮 Congrats!!! And thanks for the review! Stay safe there with your family! 🖖😊

[@aarondavis7719]

I love it! I only thought of one thing I’d have done differently and that would be the small swivel casters I’d have installed roller ball bearings. I think it’s a great design though!

[@rrb79]

Good review. Will wait for the 55” single rail option.

[@themplar]

Looks really good. And the price is okay too. A nice review the problems i expected werent there.

[@sunpointstudio4472]

Back in the 80's Black & Decker had a similar product with track and sled mounted C-saw albeit not as long and was designed for crosscutting at various angles. I still have one, it was called the miter-mate and was sold as an accessory for the Work-mate bench.

[@hansiejansevanrensburg291]

I love it. I'm adding it to my Christmas list. I would have liked to see an angled cut.

[@Joey.Darkwoods-Studio]

Great review and for the price, if someone already owns a circular saw, I think it's worth it.

[@tomtillman]

I have the Wen 7 1/4 corded track saw with a 110" track AND a clamp-on style product similar to this one. I consider the clamp style type a waste of money because the real track saw has spring plunge and is easier to work with all around. The blade guard on a regular saw also is a constant hassle. If you get the Wen, be sure you get the 110" track, not the 100" inch one. currently, both are being sold for about the same price.

[@IamPlank1920]

Thank you, I've been looking a product just like this.

[@oldmarine312]

Thanks for the in-depth review.

[@brucelee3388]

An important thing for some users is what other saw/router track is the profile compatible with. There is the Festool profile and the near identical Makita profile (effectively interchangeable) versus the Triton/US tool profile, which are not interchangeable - it looks like Milescraft are trying to add a third standard, which kinda sucks for users who already have some investment in track guided tools or may want to add something like a router sled. (Then you have Bora who appear to have 2 different profiles within one brand)

[@kevinintheusa8984]

Nice review. I use a homemade version without a need for a saw cradle but I do like the fit and finish so I may spring for this at some point. I would actually put on a cordless dedicated saw on it and just leave it on since I do use a track saw often.

[@boyy2411]

This is a really good review and I feel like it was extremely honest,

[@troyboy4345]

£120 in UK money is bloody good value, for multiple saw users ! ..... thank you.

[@gregglarson9981]

Excellent review of this track saw. Thank you. How does the cut look? Is it perpendicular to the adjacent face?

[@MacDaddy88]

Very good review. Excellent job overall. Couple of comments. When you're using a aftermarket jig type setup like this you are missing a riving knife. Which is a major plus of set-ups like Festool, DeWalt, Milwaukee, Ridgid Etc. Plus with a dedicated track saw you get exceptional dust collection.

[@rrb79]

Also bevel cuts and plunge start.

[@pawpawstew]

When the stock is moving through the blade, such as with a table saw, I'm a big proponent of the riving knife. However, I'm not sure it's as much of an issue when the stock is fixed and stable, as with this type of rig. It's really made for breaking down sheet goods.

[@daveoftheclanburgess]

Good review, thanks. These must be ok... try finding one to order in Canada🙄. It is an obvious compromise from a bigger table saw or a dedicated track saw but could be a useful addition. The sled looks a lot better than the Kregg version.

[@scottmorris4914]

I currenlty have two curcular saws. One is a Dewalt, that I bought as a refurbished swa, works great, but is extremely heavy. It is deinfitely built for more than what I do. I also have a Milwaukee M12 circ saw. I like th eprtability of this and would not want to dedicate it as a track saw. So I am in the situation where if I bought the Milescraft kit, I would also be buying circ saw.

[@RayCollins-dv4ts]

Stay at it and take care of yourself. Thanks for sharing. Hopefully it will encourage others to do more for their own health too.

[@jimwiskus8862]

I think track saws are valuable for those of us who need to breakdown 4' X 8' sheets of plywood and other materials but who have a small foot print shop. This would be a great solution to breakdown those sheets of oversized materials in the driveway, weather permitting.

[@pawpawstew]

Not just small shops like yours and mine, but trying to get a full sheet of 3/4" ply safely onto and through my table saw is simply impossible.

[@stevebrueggemann3947]

Great review. I just bought one to handle breaking down sheet goods. What are the four left over round plastic parts that are flat on one side used for? Makes me wonder if I missed an assembly step.

[@gazgadgets]

Thanks - interesting product. How would bevel cuts go? I assume it might throw out the splinter guard and essentially require a replacement?

[@mattdavis7291]

Great review, thanks!

[@aviphysics]

I got one of these for a couple weeks ago for a saw I already have. For long straight cuts, it worked pretty well. Obviously, it can't really do bevel cuts.

[@brucemitchell5637]

Looks like a very good alternative to a festool or makita system !

[@surlycanadian]

Yeah, the only downsides functionally is The cut depth compared to my Festool and the dust collection. If 1.75” depth of cut is enough and you won’t ever need to cut inside a house, this looks like an amazing product.

[@paulcsaszar5824]

I'll be buying that real fast awesome product review

[@allblackallblackandmorr8888]

Just brought it, saved hundreds of dollars

[@user-qg6fy4yp8t]

Thanks, great video!

[@bradleytuckwell4881]

Seem like a quality product thanks for sharing

[@Steve_in_Texas]

A really good and interesting video, thanks for uploading!! Question - when you have a saw secured onto the plate, how far is the bottom of the circular saw base off the piece to be cut? Looking at this, I estimate it's around 1/2 inch?

[@kwilliams2239]

The big think that you're giving up is dust collection. This isn't just a matter of cleaning the shop less often. That's easy. Cleaning the lungs is a bit harder. Dust from a saw isn't the worst thing (the particles are pretty large) but it's not nothing. There are cheaper alternatives other than Festool but I wouldn't go with this one.

[@csimet]

Agreed. I picked up a Makita 2x18V system for about $520. Well worth it for my use and love it.

[@FranksDIY]

Great review

[@YeahNahMaybe947]

I'll stick to my 70mmx30mm aluminium straight edge and two f clamps. A lot cheaper & less mucking around when comes to packing up at the end of the day.

[@e.collins2768]

I like this set up alot. Only downside is that saw setting guage. If i get one of these I will for sure lose the guage. I bag would definitely be a big plus

[@bijan4727]

Hi. Thanks for a very well elaborated presentation. I have a few questions. 1- can you do a bevel cut ? I guess not. 2- is it compatible with other main brands like Dewalt? 3- Did you try to put a straight edge against the cut to see if there is day light ? I would highly appreciate, if you advice. Thanks again.

[@mandyleeson1]

Great review.

[@spryttle]

Great review. Seems much more solid that the Kreg Accu-cut. I started with that one, but eventually took the "plunge" on a Makita setup. What really blew the doors open for me after the purchase were the accessories such as square guide and parallel guides. For me, that really turned the track saw into a valuable and versatile bit of kit and an incredible addition to the shop. While it's pretty cool to be able to upgrade the household circular saw and for making great, accurate straight cuts with it, I do wonder if these types of products will have some of that expandability down the road?

[@johndoe6032]

DIY tracks are pretty easy and cheap to make, and you can make jigs to add to them to do pretty much whatever you want. To me the only real advantage to a track saw is dust collection, and you have to buy a really good one to get decent dust collection. I'm just a hobbyist and personally ok with just sweeping up some dust after making my cuts, but I can see the advantage in a more professional setting,

[@cineaudiophile4465]

The Milescraft appears to be compatible with the popular 'red' parallel guides.

[@dannyb4283]

I heard it has problems with beveled cuts. Are you able to test that out as well?

[@chrisoosthuizen5197]

I can see other uses as a straightening jig for long pieces of live edge on a table saw.

[@smilgu]

Thanks for a video!

[@ragnalejl717]

I know that it may depend more on the saw, but how well does the track allow for angled cuts?

[@Fergie6366]

Loved the guide that you gave very informative and no B.S straight to the meat and tatties

[@chrisnash2154]

At first glance I thought Woodpecker came out with a guide. LOL What needs to take place is this guide up against Kregs. Kinda-sorta apples to apples since both make a circular saw into a track saw, but this does get your circular saw closer. My issue is I don’t want to have to take my circular saw off and on. IMO it’s worth every penny to invest in a track saw even if it’s the cheaper Ryobi.

[@allanmanley6340]

Great! Now I have to get a relative in S.A. to buy it and post to me... (Amazon EU does not have it...... yet)

[@darylcrabb8228]

Only thing I don’t like about this one is that when I get the two pieces of the track put together square and straight, it leaves a small gap

[@SteveStrassburg]

I have the Kreg version of this design and I believe this is a much better product and better quality. I'm tempted to scrap the Kreg and buy this one. the Milescraft is only $10 USD more expensive, but you seem to get a much better product.

[@shawnr771]

Nice saw guide. $899.00 US is much higher than I am not willing to pay for a saw guide that I would not use often enough to justify the cost. For what I need I have found a 6 ft level that I can clamp onto the sheet goods works pretty good. I can use it with either my corded or battery powered saw. The blades are on different edges.

[@surlycanadian]

The milescraft saw guide with everything in this video is $99.00USD on their website, and the extra two packs of tracks are $80USD each. So, assuming you had a circular saw already, this would cost $180USD for everything shown in this video plus two extra tracks (giving you 100” of track total). It’s a Pretty affordable way to get into the track saw business, even if you had to add $200USD for a battery operated Dewalt 7.25” circular saw. That’s about a sixth of what my Festool track saw costed five years ago and the only two major perks to mine over this setup is mine has 3” of cut depth compared to this ones 1.75” and the near perfect dust collection of the Festool.

[@shawnr771]

@@surlycanadian Thank you. I realized later that the price was not in US dollars. $99 seems like a good price point. I have a 15 amp Porter Cable corded saw for heavy cutting and a Ryobi 18 volt for cutting most thinner sheet goods.

[@SRG-Learn-Makers]

I feel like a missed opportunity to not include an anti-tipping feature since there is a t-track on the far side of the extrusion. What is that t-track for? Have you tried tilted cuts?

[@oscarpaezarce4849]

Es normal que el primer corte... Dañe o corte la guia roja

[@kennethjetton3742]

What are the 4 black pad left over for

[@Bonjour-World]

It looks symmetrical. Will it work with a saw with the blade on the opposite side of the saw body? (i.e. Milwaukee M-12 Fuel 5-3/8 inch saw)

[@markmatthews3189]

🎉 good presentation 🎉. Viva SA

[@MrPatdeeee]

Great narrating kind Sir. Also, very well in Teaching and Instructing . Thank you for what you do for us. None finer! The item is WOW great. It should sell well.

[@marchingknight11]

The Milescraft looks much better and more well made than the kreg accucut. There are only 2 things I think kreg does better 1. The track is reversible, with chip guards on both sides, doubling the length of time before you need new chip guards or tracks. Also allows you to calibrate the track to 2 different saws if you need to 2. The sled has an indexing pin that allows you to reset the saw in the same position without the need for a spacer

[@JustinBrown-hx7ve]

How does milescrafy compare to the similar PepsiCo offered by Kreg?

[@thepogsenpai1132]

This kit looks like it is of reasonable good quality. This kit is made for the diy'er. Only problem is Ryobi has a track saw for is about R800 more. And the same price if the ryobi kit is on special😂

[@Bonjour-World]

A tad bit short for full width sheet goods.

[@FrankEtchells]

As said by others looks good. One thing you didn't show/mention was cutting at an angle... 45° or other. Does the blade still line up with the edge on the tracks?

[@22966]

It was missed in the review but unlike a plunge saw on a track, this track can not do bevel Edge cuts, it can only do 90° cuts.

[@FrankEtchells]

Thanks.

[@graemebrumfitt6668]

Rite Junkie Dude, Looks good, for someone like myself who doesn't do a lot of ripping I would defo consider! TFS, GB :)

[@user-el7nx9gf2u]

I got the expensive Kreg Track Saw kit, it seemed and sounded great in all their demos, but real life experiences shows otherwise. it's not all that accurate. In reality there is no much difference from using a regular straight edge ruler and hold it down with clamps to act like a guide. The rail / screws loose grip and alignment over time, making it an annoyance to have re-calibrate it everytime you want to use it. I have mixed feelings about using these tracks options, they are OK for short cuts, but if you want to cut long boards like 8' then the rail alignment becomes and issue. for anything shorter than 4' it works great, but then at the same time, anything 4' you got plenty of alternative, if you don't already have a track guide for the circular saws. The only reason I got it was to cut long boards like 8' + but it's not living up to the accuracy shown in the demos. The point is, you always end up spend more time, setting it up, than doing the actual cut. Using a stretch edge + clamps,, you're ready to go in a couple of minutes vs. using these guide saws, which you spend a long time re-adjusting it every time.

[@richardlabek4221]

Which Kress saw are you using (model #) ?

[@WoodshopJunkies]

KUE 12.9

[@idiotluggage]

I'm curious how long the plastic ends will last. Will they come loose over time and constantly fall out? How long before they start cracking?

[@surlycanadian]

Considering no one else that I’m aware even bother with track end caps, that’s small potatoes.

[@brucelee3388]

They are an extra cost add on for Festool and probably fit a few other track profiles too as they mount to the top 'U' channel.

[@surlycanadian]

@@brucelee3388 the Festool deflector is only designed to fit on the infeed side of your track. You can’t buy two of them and put one on each edge. it’s not an end cap to protect the edge of the track like in the Milescraft ones; it’s designed to prevent the power cord and dust collection hose from snagging the jagged edges of the track as you slide the saw forward. No manufacturer bothers with track edge protection other than Milescraft apparently.

[@Hopalong..75]

Use the saw to make a plywood box to hold everything.

[@rdw3171]

It seems like a lot of these KZbin channels are getting greedy with the amount of commercials they put in.

[@davidmccabe1623]

Quit KZbin every time you see an advert and they'll stop bombarding you

[@nathanlayman8367]

Why can't you do a plunge cut with this?

[@jamesroach6348]

I disagree, The included instructions are garbage, 14:06-ish didn't realize your were supposed to cut the red aluminum portion, I couldn't figure out why my blade was running into that after using the bladeguide. Good video here, bad videos on the Milescraft site. Was going to toss this as unusable, thanks for the video. (pretty bad, though, that i have to search youtube, find a random video to figure out how to use a product)

[@briandufty5081]

Cute.

[@schm4704]

Huh. Another defunct German brand (Kress) creeps up on the other side of the planet (AEG comes to mind, which seems to be a thing now in Australia). I would like to be a fly on the wall when these deals are made.

[@michaelhemelt3133]

I don't know man you can get a wen track saw and track for $170 USD compared to milscraft conversion for 158 USD. You don't have to spend time fiddling with the setup.

[@Hopalong..75]

I would buy it if the extra tracks were not $80. $40 would be a no brainer.