Unleashing The BEAST! 2021 MT-09 SP With SC Project S1 Exhaust!

[@dolaniv]

Awesome video man ! Just ordered my S1 ! ECU will also be done by David with vcyclenut. Install looks pretty straight forward. Thanks for paving the way and making it look easy 👌🏻

[@haneymoto]

You’re welcome. Appreciate you watching and commenting.

[@admireinspire]

Dang I like that the sound is improved but it still has the intake character of the triple. This might be the one!

[@haneymoto]

Yeah man I’m very happy overall

[@kevinbarcenas5900]

Fooking sick my man! 👍 just made up my mind on that exhaust system :)

[@haneymoto]

Yeah I’m very happy with it. Thanks for watching and commenting

[@ssjakshie]

That was an awesome video brother, thanks!

[@haneymoto]

Thank you. I appreciate you watching and commenting

[@musclefox223]

Just bought myself the same model bike, I've IXIL exhaust on at the moment but I'm after the SC S1 system, they sound just wicked, great video buddy...

[@haneymoto]

Thank you. I’m very happy with the S1. Appreciate you watching and commenting

[@ar2043]

That is a beautiful exhaust. SC Project never used to be one of my go to exhausts but they really have stepped their game up with the MT09!!! Thank you for the upload. Hey, did you wipe everything down before you started it so you wouldn’t cook your fingerprints into the finish? Thanks again for the content!!!

[@haneymoto]

Hey AR, I did wipe things down as much as I could before and after. Thank you for watching and commenting

[@shapelessdream]

Could you tell me by any chance what the diameter was for the link pipe ? The connecting point for the muffler.

[@haneymoto]

I grabbed my calipers and too a measurement just ahead of the muffler. It’s 2 3/4 inches. Appreciate you watching and commenting

[@zgjfinance2796]

My dream exhaust! My budget puts me at the dominator

[@haneymoto]

I’m really happy with it.

[@zgjfinance2796]

@@haneymoto based off all the other exhaust options they seem to have a high pitch whine, an annoying frequency,(based off of audio phone clips) the sc 1 has the most beautiful purr

[@haneymoto]

@@zgjfinance2796 yeah I love the sound. And it’s just loud enough without being obnoxious. If you have any questions let me know, you can post here or DM me instagram

[@martinu.6921]

Thanks for sharing. I am surprised that the S1 fits the MT-09 from 2021. Sounds very good. Unfortunately, here in Germany (that's where I live), you will get problems with this exhaust, which is not allowed here for the 2021. Thanks to the Euro5 restrictions ...

[@haneymoto]

Yeah we’re lucky in the states. No one really care. Lol.

[@NANNjuu]

Da hast du recht. Wir dürfen hier nur shit fahren

[@haneymoto]

@@NANNjuu Had to use google translate for this. 🙂 Sorry that they regulate your bikes so much over there. Thanks for watching and commenting.

[@hiddendragon415]

Good advice appreciated, I have ordered this exhaust and like you I will be leaving the Db killer in.

[@spambunny123]

I undid the radiator to get better access to exhaust don't know how you managed without doing that it was still a pain in the ass with it moved

[@haneymoto]

Time and a lot of patience. I did remove the upper radiator mount bolt to give some room which made it easier. Appreciate you watching and commenting

[@serkkan5581]

Just liked the video for your effort try to share us your vision 👌🏼

[@haneymoto]

appreciate you watching and commenting

[@Phillzillaa]

Great video man

[@haneymoto]

Thank you, Sir.

[@garylewis176]

Sounds great! Is that an SC from the manufacture or off EBay?

[@haneymoto]

It’s a genuine SC. I had pre-ordered ordered from MotovationUSA the day it was announced. I wouldn’t trust any of the EBay exhausts. Seen too many fakes

[@Kingnabor]

The header bushing is suppose to be inserted before the header flange? I notice u didn’t show that part.

[@Kingnabor]

Also did u put the ring gasket first before putting the header bushing or the header bushing first part 06 then the ring gasket?

[@TheSebastienB]

is that end footage in palm beach?? and it sounds awesome, i have stock exhaust on mine and this pushed me to wanting to get new exhaust

[@haneymoto]

Yes sir scenic A1A. I have another video on the channel of the whole ride

[@ThorSkin69]

Hi mate, what made you pick this one vs the STR1 ? I would assume the STR1 is abit quieter as its road legal with more baffle and tucked under the bike 😊

[@haneymoto]

I liked the look of this one over the STR1. Plus you know how us Americans are. The louder and more obnoxious the better 😂 Appreciate you watching and commenting

[@Commenttrolle]

I'm so Glad i went the Akro exhaust system , much Gruntier and way more professional with instruction's and how the exhaust comes . took me 30mins to remove and fit the Akro system

[@haneymoto]

The Akro is a great exhaust. For me I wanted to keep the exhaust tucked under the bike as much as possible. I didn’t like the traditional look of the Akro.

[@ThatCleanMT]

Akras are gaudy, ugly AF systems 😂

[@GigOne]

@@haneymoto The Akro Titanium exhaust tucks under the frame like the SC. SC and Akro produce superb exhaust systems and both sound so good. Hard choice. lol I think I'm more partial to the SC.

[@haneymoto]

@@GigOne You are correct about it tucking underneath. Unfortunately they do not make the titanium exhaust for the 2021-2023 model.

[@igloo8439]

Did you get your exhaust from Motivation USA?

[@haneymoto]

Yes. They were great to deal with.

[@TheRick999]

Very crazy, wish it was there 🤩🚀👏🏾

[@lold6130]

I always install the db killer because an overly loud exhaust can become tiresome. Your exhaust sounds really good.

[@haneymoto]

Agreed!

[@Metallica5156]

Is the sound with DB Killer or without? is it possible to remove the cat? Thanks for the video .

[@haneymoto]

First off. Great user name. 🤘😈🤘 The sound is with the DB killer installed. It’s loud but not obnoxious. I did take the DB killer out but didn’t run it because it was plenty loud with it installed. It is a full exhaust and has not cat. Let me know if you have any other questions. Appreciate you watching.

[@davidrockwood5219]

Thanks for the video. I'm now installing the same SC Project S1 on my 2022 MT09SP. The O2 sensor extension cable that came in the exhaust is quite short. How did you route the O2 sensor cable to get it to work?

[@haneymoto]

Hello David, Fast forward to about the 10:57 mark of the video. I ended up splitting the wire wrap and moving the O2 sensor plug to the other side of the radiator. This made it a neater install.

[@davidrockwood5219]

@@haneymoto Thanks for your quick reply. So if I understand correctly, you pulled the connector and wire from the stock location on the left side radiator and moved the connector to the right side of the radiator. I did look at the video, and wasn't sure what you meant by splitting the wire wrap. I assume that means the O2 sensor wire is bundled in with other wires using a wrap, so you split the wrap and pulled out and separated the O2 sensor wire

[@haneymoto]

@@davidrockwood5219 exactly they were wrapped with the turn signal wires. I removed the wire wrap until I had enough of the O2 sensor wires freed up to move them to the other side. Let me know if you have any other questions and I’ll do my best to clarify. Thanks again for watching and commenting, appreciate it

[@davidrockwood5219]

@@haneymoto That's a big help, and thanks so much!

[@bill64gr]

Put the sensor wire through the oem clamps parallel to the other wire!

[@haneymoto]

thanks for the tip.

[@airmit]

Hi. What kind of grease do you use to keep the gasket on? Thanks.

[@haneymoto]

Just regular all purpose auto grease. And only a drop to make it stick.

[@preddy4100]

Can you do a video demonstration of how to pull out the baffle if you ever choose to remove it?

[@haneymoto]

Yeah Preddy I can do that. Probably this weekend.

[@preddy4100]

@@haneymoto Thanks man, I’ve been looking at getting the same exhausted, just a little frustrated they made the baffle a little harder to take out as opposed to the previous baffles sc project has used

[@haneymoto]

@@preddy4100 yeah I think you need to remove a snap ring form the end to get it out. Need to do an oil change and some maintenance this weekend, I can check it out then

[@preddy4100]

@@haneymoto yeah the snap ring was on the previous models haha, now you have to drill a hole with these new euro 5 exhausts that’s what shits me.. but goodluck with it, looking forward to the video!

[@haneymoto]

@@preddy4100 Just uploaded the video showing the DB killer removal. It was as simple as removing the snap ring and pulling out the DB killer.

[@criticsview]

Great tutorial. Did you flash the ecu or add a power commander? Or did the exhaust function without either?

[@haneymoto]

I had David at Flashed by Vcyclenut flash my ECU. He’s the master when it comes to the MT lineup

[@yamahansolo]

Power commanders are garbage now

[@jimmeythai482]

Has the exhaust been giving pops on decel?

[@haneymoto]

A few here and there, but not consistently. Its not really prone to them

[@justingibbons4648]

When you fitted your exhaust did your engine warning light come on because I have just fitted the same exhaust on my mt09 2022 model and started it up to check for links then I see my engine warning light is on now ?

[@haneymoto]

I did not have a check engine light after my install. I would check your O2 sensor. That’s the most likely cause. I did have a check engine light for the first 20-25 miles after my ECU flashed. But David at Vcyclenut let me know this would happen

[@Kingnabor]

How did u figure out which head pipes go where?

[@haneymoto]

Line them up and figure out which 2 are the same. The one that is different is the middle pipe. Then you have to arrange them with the 3 into one until you have a combination that has all three ends lined up. In a straight line. It takes a bit on the bench ti figure it out once you do you can mark them with tape to know the order

[@갓형-k4r]

What is the nut torque value for installation?

[@haneymoto]

I am not sure. I did not use a torque wrench foo the installation.

[@TiagooCostaa]

With this SC the bike loses power? A yamaha mechanic told me that 🙄

[@haneymoto]

I can confirm no power was lost. I did add a stage two air filter and had David at Flashed by Vcyclenut tune my ECU. And it’s a beast

[@ArjelAtmosfera]

How long did you wait for your exhaust?

[@haneymoto]

I was part of the preorder so I waited a couple months.

[@davidd6849]

Nice,sounds loud with the db killer lol😂 looks good.

[@haneymoto]

Yeah David, I’m an old man now that values my hearing. 😂

[@davidd6849]

Lol 😂 same here 52 years young lol

[@jeremyrawlings766]

Got the same exhaust coming this week for mine as well. David just flashed mine but I didn't specify if I was gonna leave db killer I'm or out. Did you tell him you were leaving it in?

[@haneymoto]

@@jeremyrawlings766 Should not make a difference either way.

[@starz8676]

Hai where you buy the extensions for the sensor exhaust thank you

[@haneymoto]

Hello, I am not sure. SC Project included it with the exhaust when I bought it

[@deanherman679]

Does anyone know whether this exhaust will fit my 2023 MT 10 sp ?

[@haneymoto]

Will not fit the MT-10. The MT-09 is a 3 cylinder engine and your MT-10 is a 4 cylinder engine. This link will take you to what SC Project offers for your bike shop.sc-project.com/en-US/Bike_YAMAHA_MT-10-2022-2023-

[@LeroyLBates]

Do you know where the catalyst is? Is it easy to remove?

[@haneymoto]

No cat in the S1 model.

[@LeroyLBates]

@@haneymoto so they dont need one? I am confused. I tought you need one? Thx for the fast awnser

[@haneymoto]

@@LeroyLBates not needed. Unless you’re in a country that requires it.

[@LeroyLBates]

@@haneymoto yeah i am lol. So. its an extra you need to buy right?

[@haneymoto]

@@LeroyLBates sorry to say, in that case the you need to chose a different exhaust. The STR-1 is euro 5 compliant shop.sc-project.com/en-US/Bike_YAMAHA_MT-09-2021-2023-/4769_Y37A-C135MB-STR-1-muffler.htm

[@ezywin_matrixoutsider]

Nice bike bro!!! Did you consider the z900 or the 765rs at all before buying this SP??

[@haneymoto]

When I was buying I consodered quite a few bikes. The Speed Triple, Trident 660, MT-10, MT-07 and a few others. I settled on the MT-09SP because it fit my riding style the best. I'm a mix of commuting, cruising and a bit of hooligan. LOL. I went with the SP just becuas I likes the color scheme better and the cruise control is nice

[@lazaroruiz4388]

❤️

[@alanstringer7997]

I have sc projects on my 22 mt09. It’s too loud. I like loud bikes but I can’t even ride it without ear plugs. Sounds great just too much if you actually want to ride it

[@haneymoto]

Which model do you have? The CRT is very loud. The S1 is much less obnoxious with the DB killer installed

[@eugineniembra732]

why mt09 xsr900 and tracer900 engines so noisy like , something is off

[@haneymoto]

Not sure what you mean. I love the sound of a triple.

[@lukerosenthal2490]

you should always change the exhaust gaskets. They work like crush washers, once exhaust was originally tightened, they will never seal and crush properly to the new aftermarket exhaust.

[@haneymoto]

Appreciate the tip. I must have gotten lucky as I had no issues reusing them thus far. But I’ll keep that in mind for next time

[@Soul_Rajib_0003]

Vroom 💥 vroom 💥

[@aressimbamt0959]

akrapovic dont have that short model for new mt09 ?

[@haneymoto]

I haven’t seen one

[@aressimbamt0959]

does your seat move side to side like its lose?

[@haneymoto]

@@aressimbamt0959 there is a little play yes. Seems to be normal

[@ssjakshie]

That was an awesome video brother, thanks!

[@ArjelAtmosfera]

How long did you wait for your exhaust?

[@haneymoto]

I was part of the preorder when they were first released so I waited a couple months

[@ssjakshie]

That was an awesome video brother, thanks!