Unlimited The Top Speed For Ecotric Electric Bike With LCD Display

[@rainbowrailroadcrossing7798]

If you hold all of the buttons at once does it take a screenshot?

[@antispiral2616]

LOL😂

[@antmcc7826]

😂😂

[@MarvstubeSoontv]

You bms 😂🤣🤣

[@TrumpetMonkeyy]

😂

[@brianguarino8150]

Where can I find the manual for the S900 display? Everywhere I search on the internet only has the SW900 which some of the setting numbers correlate to different settings.

[@jcvegaf]

I don't see the voltage options on the P03. Appears from 0 to 60. And other parameters are different too. Please, you can help me. I need the description of the parameters. It's the S900 but it looks like another software version

[@jontourville7421]

I did this with mine and it is as fast as I need it.

[@UchihaSumairu]

I love this bike but i've had the same issue with 2 different batteries now. I'm not sure if its the connector failing on the bottom or the BMS going but it just stops putting out power through the bottom though the lights still turn on. I'm looking to replace this battery and build my own as the one it comes with seems to have an issue. The issue is there isn't anywhere to mount a new battery really. I love everything about this bike other than that. I'll have to figure out a way to mount a new battery and wire it...

[@fender42421]

add a rear rack and boom you have another area for a secondary battery.... thats what i do to get 60 miles round trip

[@esecreeps13]

@@fender42421i upgraded my e bike battery to a 36 v 20 ah my ecotric sportscool

[@XiaolinDraconis]

I got this bike for free, has 136 miles on the odo, I have one I built for 600 dollars but 20ah vs this 13ah. Both 48v 1000w bikes but mine isn't limited in speed. Can get to near 40 mph. I plugged my battery in and it worked. But it has the same problem with just the brake light if I power it with the original. This wiring is a mess but I don't believe the battery is bad. ​@@fender42421

[@bonk65]

I purchased the 20" 500w 36v version. I did not realize that there is another 48v version which has the lcd display. CAN i retrofit an lcd display on my version? Thx

[@DepleuerAct]

with the p3 setting u adjust the voltage. all of those cheap ass china or a bit more quallity china controllers have basicly the same controller programms sooo yeah

[@Calzone_J]

Can some help me. I’ve got this exact lcd screen on my bike but it doesn’t work properly. Doesn’t tell me my speed

[@ImapsychoLover]

Battery drains like crazy

[@Ozkar2023]

Can an ecotric that had a display work without or a non working display?

[@josephseibert1540]

NICE!! I appreciate the video alot!!

[@ra...6719]

What about removing the throtle dead zone or delay zone

[@schrodinger3467]

This is incomplete. There is a master lock that needs to be toggled first via brake lever press on controller activation in order for this speed limit change to be implemented.

[@Billybritt-s4t]

Most can't be changed cause the have the speed sensor in the hub it know what size wheels are on the bike

[@Insanity_Wolf]

So why did you stop at 45? 100 is "unlimited". Don't understand why companies dance around unlocking an ebikes full potential. Recently had to figure out the access code for a display because they kept giving me the roundabout for the PIN.

[@jluna193]

Can we get a video on what’s the best settings for the FAT26S900-MB

[@ecotricelectricbike4216]

Original setting is the best and safest setting.

[@NanNanNABooBoo]

@@ecotricelectricbike4216 why did my pedal assist go out 2 mintues after using ? Throttle still works, but pedal assist wont engage anymore

[@dominicfig]

@@NanNanNABooBooidk if that bike has a sensor behind the pedals, but it might have just moved out of place

[@arj8309]

That's not unlimited! The your ecotric has a governor! And mine does 28 after changing some other settings...

[@sparkyyrc1292]

Hey! How do make it go 28?

[@teagentires_]

@@sparkyyrc1292 lmk when you find out just ordered the 48v

[@Zed-Corps]

My LCD isn't turning on, the battery is fully charged, is there a way to factory reset the LCD?

[@celticcrusader2648]

Same here, only had my ebike 1 day too

[@Zed-Corps]

@@celticcrusader2648 from my experience; it's the battery that's the problem, try charging it again and leave it for 2 hours, then try turning it on again. If it's still not turning on, return the bike for a replacement asap, because I tried getting it fixed with customer service and they sent the parts no problem but it kept on having issues down the line and now stuck with a defective unit since it's out of manufacturers warranty.

[@celticcrusader2648]

@@Zed-Corps Thanks for the advice. It’s currently on charge, I will test it again later .

[@JohnEPezze]

I just bought one the 26 inch fat bike and I don't know if I have it set right . do I need to register my bike with you guys for the warranty and how do I do that I am not computer savvy

[@Billybritt-s4t]

No hell no run as fast as you can

[@NanNanNABooBoo]

Anyone know why my pedal assist quit working 2 minutes after first ride? Throttle stills works, just electric pedal assistant wont engage anymore

[@ianmangham4570]

Broken

[@SwiftyShaft]

Mostly likely the sensor that detected the peddling

[@DjSharperimage]

Is there a way to make the Ecotric Peacedove have unlimited top speed? It has the 810 LED Display.

[@bankrollace8737]

Increasing the tire size will make sw-900 controlled bikes go faster. My ecotric does 30mph off ground and 25mph with me on it.

[@Taz92841]

How can you explain

[@ianetchingham5634]

@@Taz92841 PO6 to 30.0

[@TheRealElectricOutdoors]

@@ianetchingham5634 that is literally increasing the magnets meaning ur wheel is smaller lol your nto actually going faster just your speedometer is reading higher xD😅😅😅 down the app speedometer and ride with it and see for yourself

[@robertddvv2]

How can I ORDER a new computer, the one I have is broken?

[@ecotricelectricbike4216]

Please contact the seller where you get the bike,we have spare parts in stock.

[@vincenzoveneruso4658]

Where i can find the S700 manual?

[@PaulWatson-y9t]

Mines asking for a 4 didget code to get into settings. Anyone know the code?

[@yosafhabeah7585]

idont have p0 7 why?

[@Dyinglight04]

Mine says up to 100km but it can only go up to 30km

[@aggameing2011]

Whatisbikename

[@damionoconnor5566]

Can that display get wet?

[@ecotricelectricbike4216]

Ride bike in rain is no problem(remember to dry the bike before using next time or the bike may go into self-protection program ), immerse in water will destroy the bike.

[@ronniematthews3408]

Will the 500w ecotric leopard all go 25mph ?

[@SojournerNX]

I have the 36v/500w Leopard. Doing what they did in this video, mine shows exactly 25mph with my rear tire lifted off the ground. However when I check my speed with Google GPS, it's actually showing just over 21mph. Great bike for the price though.

[@bankrollace8737]

Yeah. Increase the leapords wheel size to 30" and it will hit 24-26 mph on flat land....

[@Riley_Christian]

Not "unlimited" thats 45 km/h - 25 mph lol

[@anthonybunch8044]

Well Shtt Lol 5 miles more than 20 Mph is appreciated!

[@enriquealmonacid568]

hola soy de peru, tengo esa pantalla S900 en el ajuste P03 del voltaje que debiera ser 24 36 y 48, a mi no me sale esas tres me sale de 0 a 60, es decir si presiono arriba comienza de 0, 1 2 3 4 5...hasta 60 por favor si me podrías ayudar con esto gracias

[@jcvegaf]

Encontraste la solución? Me la puedes enviar

[@NelsonAerial]

Just set up both of our Fat Tire bikes, with fully charged batteries. The battery indicator on the display of one of the bikes shows almost no battery charge. But, the indicator actually on the battery shoes Full. What is wrong? Thank you

[@ecotricelectricbike4216]

Your bike should be 36V,the voltage maybe changed to 48V. Please go to setting page,select P03,then adjust the voltage from 48 to 36.

[@fritolay001]

It looks like its not unlimited but 25 mph no?

[@RainbowsixsiegeKITPV]

He maxed it out to 45mph it said 25mph when he tested bc he held the brake so bike wouldn’t go flying

[@perezr1020]

XxxElijahXxx5 no, it is capped. It’s not unlimited.

[@RainbowsixsiegeKITPV]

Roberto Perez I didn’t say that’s

[@RainbowsixsiegeKITPV]

Roberto Perez all I said was he capped it at 45

[@devinreed2003]

@@RainbowsixsiegeKITPV 45kph not mph so 45kph=25mph

[@luimobilefixes5279]

They hacked your video it stops at 30 secs. why? whats the next steps?

[@dahoodmenace187damob2]

Is that the 1000 watt?

[@ThatLIGuy2002]

No, 500

[@smashaj2955]

How to install?

[@mfuji02]

only 25 mph?

[@bigdaddykahuna1]

Certain states have restrictions...

[@curtisslinkard8390]

Forgot to unplug limiter wire

[@rbbagley]

Tell me more.....what color is it?

[@yaseenali4449]

We like it

[@JoshIsHuman]

i want to go fucking faster

[@luisraul6569]

It's a lie, I did the same thing and it's not true, it always accelerates the same in any pass.

[@Bilbog]

you changed the magnet steel number for speed test, P08 is for Speed Limit

[@justinlacey6643]

Do you have a break down of what each menu is?

[@TigerTT]

Actually this video is correct for the S900,the SW900 has different options. So for the S900 the PO7 option lists the speed limit in KM. I own the newest 2019 ecotric folding fat ebike and it has the same S900 display shown in this video. I was riding last night for the first time and it was set to 32km by default,limiting it to only 20mph and then it would cut off the pedal assist.

[@mattfreni7714]

TigerTT where can I find the instructions

[@diskgrind3410]

@@magnuslarsson6909 That is for the SW900 no the one shown here, that model is the S900, they have different PO layouts.

[@streetwork5069]

I did this and it went to fast..I crashed into a Bentley downtown LA..

[@streetwork5069]

Also..cut your nails 💅

[@ElusiveOvie]

I did this and my bike went faster but midway through my trip the bike cut out and won’t turn back on I’m going to sue

[@chickenfried12]

How about contacting customer support before suing

[@angelteamnolimit624]

Never said 45 lmfao

[@fender42421]

cut your thumb nail lol

[@Inuzamy]

Bro clip your nails

[@moneymakingsim4314]

The WORST! Why don’t you TALK?!?! There are other P-code functions that correlate to speed hacking as well..smdh