UNVEILING my FAVORITE Bit of the Year and why it makes my horses so SOFT!

[@johnjacobs4207]

everything starts and ends with the principle of bend. The best way to achive softness is through bending with a snaffle or hackamore. I use both at the same time. After my horse spends a few years in the hackamore and can back a side pass then he is ready for the spade. But in reallity everything can be done with the snaffle.

[@elizabethturner7739]

That's why I got to using myler bits. So much comfort

[@bobcollinge4292]

I love that bit! I purchased one and one for my mother to use on her horse in Norway! Really great bit! (5 min mark)

[@geraldblair5084]

Were did you. Get it at

[@judithtorma3652]

The bit you show is not the same as is available on the websites. You have an extra collar on each side of the port. Where do you get the exact same bit?

[@jeanfish7]

As a kid, my parents bought a retired Spade trained ranch/ cow horse. Obviously kids aren't going to ride a Spade bit. The former owner told my dad, " just buy a bit with the smallest curb so he's stable for neck reining. :)

[@trevinize]

I have my bridle for the past 30 years. For colts thru trained horses use always the same one. Hope you will keep it for a long time. We can change bits over and over, the horse will have the same mouth.

[@cdwesternhorse797]

Looks very cool. I recently bought a Jim Edwards V correctional (which is pretty close to this) and I'm just in love with it.

[@bargreiner]

Got mine, still working on the feel on an older horse

[@beverlyschulz1062]

Looks like a great bit. E used a similar one years ago.

[@l.horseman5704]

Have you ever had the chance to use a Mikmar bit? I sure wish you would try and review. I do not have any connection with that company. I do use one. I like the way they que the horse. They give three que's.

[@horsetrainingpro]

I did not but would be open to trying one

[@Ghostface-V1]

Just purchased this bit and I love love love it!!!!

[@sunnymcalister2366]

How did you find it? The link he provided here does not work

[@natalieevans8887]

Right, I can't find the link to purchase, please share!

[@AdrianMendozaa]

Thanks for the explanation 🙏🏻

[@southernforestgypsy]

Yah that's very nice - how about a NAME for the bit and the bit MAKER.

[@horsetrainingpro]

Thank you Holly! The bit is call the Comfort Bit and it’s made by Metalab

[@kristahavik3931]

Lov this bit,my horse loves it too 😅

[@childcrone]

These horses are absolutely splendid. I don't understand how this posture and carriage is considered desirable, though. Avoiding way under or behind the bit is not softness.

[@firefly_the_rescue9308]

It’s just for the discipline. Western pleasure/reining and whatnot desire a lower head set. (Not as low as what was shown in the video)

[@darrelmorris3765]

who is the maker of the bit you are excited about and where can I find them?

[@horsetrainingpro]

fgproshop.com

[@horsetrainingpro]

Look on my website. horsetrainerpro.com

[@themockingbird893]

9:16. The bit on your link is not the same bit that you show in your video. Is the bit in your video still available?

[@gilbertofigueroa9836]

Thank you for sharing this I think this makes sense I’m about to order my

[@crosscreeksfarm1003]

The bit in this video is not the same one on the website or on fg pro shops website. I cant find this bit anywhere. All the ones for sale have 4 swivel points, the one in the video has 6.

[@horsetrainingpro]

You can find it on my website horsetrainerpro.com but it is currently out-of-stock. Manufacture expects new batch sometime in October

[@laurainehoughton8968]

Could you please link where to buy this bit in your comments Thanks.

[@horsetrainingpro]

Hi Lauraine, our sale page will be ready next week. I will be posting the link as soon as it goes live

[@appylover5283]

Hi I just looked at the site and couldn’t find this bit what is it exactly called ? Thanks

[@horsetrainingpro]

Look on my website, horsetrainerpro.com

[@carmengrego4105]

Thank you for this video! I’ve searched for over a year before I could find this bit in stock. Works great for my mare. But I really wanna know about the second bit you showed. The leather wrapped d-ring with a purchase. That’s a very unique design. Where can we buy it? Thanks

[@tube01jj]

Hello, where can I ges the Ultra confort bit médium port sku 257633?

[@themockingbird893]

Why do all of your bridles have the leather looped on both sides at the buckle?

[@3DArchery]

Trying to find the actual bit for purchase and the link does not work. please send web page to order this bit thank you

[@horsetrainingpro]

horsetrainerpro.com

[@Pippa62]

This bit is great. My overly sensitive horse likes it.

[@horsetrainingpro]

Isn’t it great? We’ve made a version with snaffle rings, it’s incredible!

[@mazdarick76]

I thought this was Peter McKinnon for a second with that intro!

[@horsetrainingpro]

Haha! I'm a huge fan

[@jenear3051]

Love the new designs!

[@johnbitsuie421]

It's good bit, where can I purchase one

[@horsetrainingpro]

Yes very, thank you! Link should be in description

[@johnbarker4385]

I'm a custom bit maker and a lot of the bits I make a variance of or close to the same exact I would love to to get you a bit or two and have your thoughts on them

[@horsetrainingpro]

I would love that!

[@firefly_the_rescue9308]

My 25 year old Arabian/QH mare is in a D-ring snaffle bit. She’s super hot and loves to run. Every time I ask for a simple walk by putting a bit of pressure one rein at a time, she throws her head up and just pushes right through the aid. Same with turning- when I ask to turn she hesitates and refuses unless I really reach down and FORCE her to turn. My trainer suggested a full bit with a correctional port.. would you suggest the bit you were talking about? Thank you

[@horsetrainingpro]

Absolutely 100%

[@horsetrainingpro]

I would recommend a short shank Snaffle or miler to transition from Snaffle to my comfort bit though

[@tasseyko]

This Bit looks interesting. But just to add on, I had a horse much like the one you are describing. Getting the horse soft in the mouth , while from the ground, utilizing "pressure and release techniques", made a huge difference. A good bit is a great tool to cue what you want the horse to do, but they need to fully understand the correct response on a foundational level. Its a combination of the training AND the tools. Best wishes

[@leanneobrien4235]

Who makes that favourite bit and what is the name of it please I’ll see if I can get it in Australia

[@horsetrainingpro]

It’s the Comfort Bit by Metalab. It’s not available in Australia but due to increasing demand I’m going to ship some this week. Please contact Robyn Ross

[@katbiz1229]

I would really like to order this bit, but the link is broken and goes no where, how else can I find it? Thank you!!!❤

[@horsetrainingpro]

Try horsetrainerpro.com

[@V4K4R14N]

I don't know if you're still checking comments on old videos like this but the link in the description for the bit no longer works.

[@horsetrainingpro]

Great thanks for the heads up! I will update

[@horsetrainingpro]

It has been corrected! Thank you! Send me your address via website. I will send you one complementary for the assist 🤙🏻

[@V4K4R14N]

@@horsetrainingpro What!? Tysm!!!

[@donschmidt3398]

Still looking for the exact name, model, cost and supplier - Please provide appropriate information.Thanks

[@horsetrainingpro]

@@donschmidt3398 www.horsetrainerpro.com/product-page/ultra-comfort-medium-port-short-shank

[@horsetrainingpro]

The Ultra Comfort Bit made by Metalab and designed by Professional Trainer Francois Gauthier is available at several tack shop and on our website. It retails 84.95

[@marcibraddock3417]

I have a finished reiner who constantly gaps his mouth and chews any bit I use. He has a very narrow mouth, and a low palate or shallow mouth. I would so like to try this bit, but I can't find it anywhere. Can you PLEASE help me?

[@horsetrainingpro]

Look on fgproshop.com

[@dawnramiza9424]

What is your preferred cheek length

[@horsetrainingpro]

7 5/8

[@equestrianmusicedits29]

Would this but work for my 20 yr old gelding? He is a paint/Percheron cross and has been trained for barrels so when I try doing circles and stops with him he throughs his neck into it and just goes faster until I force him. I really don’t want a harsher bit but can’t seem to find one that works for him

[@horsetrainingpro]

I believe so. Sure is worth a try

[@tammyhanlon4921]

What's the name of this bit

[@horsetrainingpro]

It’s the comfort bit. You can find it on our website horsetrainerpro.com

[@Bwanar1]

What is the name of the bit?

[@horsetrainingpro]

@@Bwanar1 Comfort Bit by Metalab

[@Bwanar1]

@@horsetrainingpro Thank You!

[@garyfaircloth6154]

Please forward to me the company who manufacturesand sells the comfort bit in this video.

[@horsetrainingpro]

Visit our website. Only 5 left in stock

[@garyfaircloth6154]

@@horsetrainingpro I still do not know how to order one

[@cathyfoster7361]

Does this bit come any wider than 5” mouth piece?

[@horsetrainingpro]

I don’t believe so

[@stellathompson4582]

Where can I get that leather covered bit? Thank you for this video!

[@horsetrainingpro]

Did you google it? Let me know if you need help getting one

[@carmengrego4105]

I would really like to have the leather one you touched on

[@diamondhorse4692]

Where can the bit be purchased? TY!

[@horsetrainingpro]

Try fgproshop.com let me know if you have trouble getting it

[@diamondhorse4692]

​@@horsetrainingpro. The one offered at FGproshop has 4 swivels instead of 6. The one in the video has 6 swivels & is one needed (Extra 2 barrels). Please let me know. Awesome video, btw. TY!

[@horsetrainingpro]

fgproshop.com/products/fg-ultra-comfort-series-medium-port-bit?_pos=2&_psq=comfort&_ss=e&_v=1.0

[@marylamb56]

I was so thinking you would tell us all about light hands and using your body, breathing and timing?🤭🤔🙈💕

[@SheyeesHorses]

wow i love it! maybe we will see a giveaway soon 😁

[@SheyeesHorses]

or you could put a link so we can buy it cuz i have a hard time finding it lol

[@emilylipsitz]

How many horses do you have?

[@horsetrainingpro]

Too many 😂 or never too many 🤔

[@emilylipsitz]

@@horsetrainingpro could you do a meet all of my horses with age and height and what your plan is for them?

[@emilylipsitz]

@@horsetrainingpro and how many stalls do you have.

[@horsetrainingpro]

@@emilylipsitz great idea!! I have on average 20 horses in training. I would be happy to introduce them and show you around. It will make a great topic for the first video of 2021

[@trevinize]

I have my bridle for the past 30 years. For colts thru trained horses use always the same one. Hope you will keep it for a long time. We can change bits over and over, the horse will have the same mouth.

[@User-hw7yw]

what bit should I use on young horses that do not accept correction?

[@horsetrainingpro]

That's a good question, what do you mean by 'do not accept correction'?

[@User-hw7yw]

@@horsetrainingpro Thank you for your response. My family have two young horses (3-4 years old). The first one still opens his mouth when using the correction bit. The other is hard on his mouth, does not react to any exercise, although he has never ridden a bit with a shank before.

[@Conny226]

Why is the horse holding the do low when you ride it ? It looks extreme

[@horsetrainingpro]

Yeah you’d be surprised what happens when you let go of the reins long enough

[@noninoni9962]

Keeping the name of the bit and the maker a secret??

[@horsetrainingpro]

The bit is called the FG Ultra Comfort Bit by Metalab

[@laneyblenkin3271]

My mare gets hot and she’s not soft at all🙈if I pull on her her mouth, she gradually slows down but pulls harder and harder back on me. I’ve ridden her in a peanut link shank, a slow twist d ring, and a snaffle, nothing I put on her seems to touch it. I’d put something more aggressive on but she’s my baby 😂 would you recommend one of these for her?

[@horsetrainingpro]

Absolutely! I’d use the Ultra Comfort Bit it’s amazing. I’ll notify you guys when it’s back in stock

[@laneyblenkin3271]

@@horsetrainingpro Cool thanks!! I'm excited!!!!

[@jadam-2024]

Okay just so I’m clear , there’s nothing you can tell me about these bits which are the “future of horse training”. But we need to stock up on them and oh they are for sale on your website. What a weird video.

[@gerrycoleman7290]

It is ignorant to think that bits are good for the horses.

[@Youreout]

Why do you ruin a perfectly good video with obnoxious annoying music? Thumbs down for this reason.

[@horsetrainingpro]

Apologies. We’ve fixed that in other videos after.

[@bernhardpflug7924]

Work on your hands not on the bit....

[@torstenrastaedt5154]

Which company doing that Bit?

[@horsetrainingpro]

Metalab distributed by Partrade