Replacing a rusted cross member on my 2007 Silverado

Out with the rust, in with a new cross member. my 2007 silverado is going to be an HD when I'm done lol
Reconstructables/
www.avalonking.com
Coupon Code: UNWRECKED25
It grants $25 off for any order and combines with the built in automatic discounts for 2, 3 or more kits.
Launch CRP429C
goo.gl/wdapu7
Save an extra $30.00 when you apply the coupon on the page!
All music used within Fair Use.
Track: Ascence - Rules [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Ascence - Rules [NCS R...
Free Download / Stream: ncs.io/RulesYO
Song: Icehunt - Hover (feat. Helen Tess) [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Icehunt - Hover (feat....
Download/Stream: ncs.io/HoverCr
Song: Kazura - My Holidays (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Daloka - My Holidays (...
Song: MBB - Sax (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • MBB - Sax (Vlog No Cop...
Song: DayFox - Departure (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • DayFox - Departure (Vl...
#Silverado #RustRepair #Welding

[@harryireland1935]

I gotta say man, this is your best work ever. And the amount of time you're putting into making these vids....hats off to you, Todd.

[@UnWrecked]

I appreciate that. People don't understand the amount of time that goes into editing

[@kevinjohnson1958]

C'mon people, help this brother out and watch the Ads. Make a cup of tea while the Ad is playing.

[@smalldoseofmeful]

You must be a brit. No one in freedom land makes tea while waiting for anything. Lol. Cheers mate. Ha

[@aussieas.9296]

I didn’t know that was a thing... okay I’ll sit through the adds 🤙🏻

[@adammartinez9557]

I pay a monthly fee so I don’t have to watch the ads

[@gottatinker3363]

why was that piece of steel sooo expensive?

[@paullevy561]

Pick up a chain cutter for doing exhaust work. Easier, and makes clean cuts.

[@MrTydriver]

Looking good on the truck Todd. These are great improvements for the longevity of the truck !

[@planesmoreplanes5285]

Good job unwrecked

[@charliesydnor8889]

Todd have a question. Is your Silverado a salvage truck from copart that you rebuilt just curious. My opinion Stewie needs his own channel lol 😋

[@UnWrecked]

Nope I bought it used several years ago

[@charliesydnor8889]

@@UnWrecked thanks for responding your truck is a very nice truck. Unfortunately you have to deal with road salt. Never realized how hilly/mountainous Pennsylvania is. Looks beautiful where you live. You should buy stock in Johnny's lol 😋

[@klc317]

Looks good....more better!

[@twub7877]

Nice job Todd I am pretty sure you will be president of the PA cross member society with this job if they create one looks very solid making that truck like a rock again

[@peturtrump3773]

so many that's whats she said missed opportunities

[@rjackson2090]

from someone not mechanically inclined, this is pretty impressive

[@kimberlyann8512]

All ads watched through, another awesome vid, your editing is 100%. Keep up the great work. 👍 BTW- Do you ever take a day off?

[@UnWrecked]

What's that?

[@rege11111111]

if it was 75 here i would be wearing a jumper to keep warm it never gets below 80 plus here along the equator.

[@rege11111111]

@Christopher's Perspective north Queensland Australia up in the rain forest

[@chadharmon5716]

Might as well change the fuel pump never gonna get that accessible again

[@UnWrecked]

.........I think you missed an episode

[@chadharmon5716]

Probably man I try to keep up with ya

[@UnWrecked]

@@chadharmon5716 yeah I already just replaced it

[@chadharmon5716]

UnWrecked I'll go back and look for it 👍🏻

[@Brooklynraised68]

You got the skillz nice vid thumbs ☝

[@gumbytat]

Stewie!!!!!! Stella!!!!! man your welding is getting really good , nice cross member repair truck should be happy for a while now !!!!!!--- CALZONE!!!!!

[@45AMT]

Great job on the cross member Todd! A lot beefier than the stock. As far as the exhaust welds I always say if they don't leak who cares what they look like. They're under the truck and will just get rusty anyway. Looking forward to the potential "project" Great job on the video as always!

[@grandham5]

Nice job man, i have alot of stuff to do like that today. Take care man

[@slagdemon]

Nice job, Todd!

[@phillipclaridge3112]

One job down - about 100 to go!!!! Keep on truckin'

[@SloppyJoe54]

Todd, If you thin that rustoleum primer with acetone about 25%, it will go through your gun much better.

[@hansoconner6898]

Nicely done dude! You got loads done! Stella and Stewie rock! Stewie for President! 😊

[@SeimsdalenSpesial]

Nice job! Looks awsome, cant wait for the good dose of fluide film :)

[@Tommy_Mac]

Great job! Same issue on my 05. Where I live your truck would be considered "rust free", lol

[@aussieas.9296]

Always great content and no Supercars which makes a nice change 👍🏻

[@patdevine2368]

2 seconds of Stewy! That’s it?

[@lonniedavis4462]

The suspense good job so I have a question why didn’t you just go to Johnny’s and get a muffler

[@superautocreations6148]

OMG don't tell me you bought a Boat. Haha that's the new build everyone is trying now. I hope its something better than a boat. Like a Classic car or something.

[@superautocreations6148]

@Christopher's Perspective Well I am doing a boat but not because any of them are I have been planing this for 3 years now and I got a killer deal and want to get on the water. Still waiting on the Body shop to pull the frame on the Challenger build. So I need something for the channel.

[@boredazz100]

Would that dip in your old cross member be for clearance for something on the truck bed?

[@workingmansrestorations7071]

I am wanting A harbor freight shirt... I need 3x and think you only have 2x

[@DJinNJ08830]

👍great job

[@traviscoxracing]

Check out the movie fighting with my family. Your twin is one of the wrestlers in training. I had to check to make sure it wasn't you

[@Toby_the_Glen]

That dash cam was actually pretty good for the money?

[@travisburch6970]

Please oh please let it be a twin turbo Ford Pinto 😂🕷️ 🕷️🕷️😳😳 😳

[@UnWrecked]

😂

[@rustywrenchprojects4171]

hey i would buy it from ya...if its twin turbo pinto. I've been looking for a while hoping to find my old high school car... 72 pinto with a Merkur XR4Ti turbo 2.3 engine I transplanted.

[@garyashdown5376]

Any weld that does it's job is a good weld and in any case apart from the nutter playing on the road trying to collect engine numbers who's going to know !!! Well apart from us and we won't say anything 🤫🤭. Trucks looking good I'm very impressed, now the mystery build hemmmm something you've always wanted, the family don't know anything about it, the owner is under the weather??? Is it a Edsel one of America's finest 🐱🐱 Gary.... England 🇬🇧

[@rustywrenchprojects4171]

O.K. you may wanna think about your next silverado project.....adding a blower/turbo/nitrous system(one of these, or all three) to help make up for the extra crossmember weight.

[@bigbird2100]

It's cheap and I always wanted one that's a done deal.

[@tommicky6296]

You need a plasma cutter.

[@UnWrecked]

Ok! My address is ............ Lol

[@gbattilanaf]

Looks like there was a hot dog stan near by

[@chadharmon5716]

Damn northeast salt

[@d1strappazon]

So which shirts are the cheap ones cause they all seem pretty expensive?

[@UnWrecked]

$14.99 ones. I take a dollar off that and I'm losing money on each sale

[@d1strappazon]

I see, well that sucks for you then. your rusty truck looks like all our vehicles here in Michigan. I hate it so much, you can't even keep a nice vehicle nice for long anymore......

[@gilbertfranklin1537]

Well damn, Todd. Once you stop talking and get to work all hell breaks loose. I did not know that you were an iron worker supreme. I thought for a minute you were making a wrecker out of that truck. It sure looks sturdier now, as long as the welds hold...🙄

[@kevinjohnson1958]

18th baby

[@wilsonandrade2220]

👍👍👍👍👍