Update! Easy DIY Dripless Paddle for Kayak, Canoe or SUP

[@matruthn.m.bassin]

I found your channel few weeks ago and you have a great and informative ideas I’ve taken and applied for my self. Thank you good sir🤙🏽

[@KayakhacksFishing]

Awesome! Thank you!

[@derekspace]

Thanks for the update! Just discovered your channel. I also fish out a of a paddle powered boat (OT Pack) and also do some inshore salt and inland smallmouth rocky rivers where I constantly use the paddle to dig in mud, sand, grass, and rocks. There is no way it could have lasted but I think you are totally right about apply it before the cold months and then as it wears off in the spring...down south those water drops feel good! Good job doing an update. looking forward to more of your content.

[@KayakhacksFishing]

The best solution is to use the duct tape hack - kzbin.info/www/bejne/r5SamGOZfNdniMU

[@kevadams1964]

I did the NeverWet too. It does wear off. However it works very well. It seems to wear off slowly. My final opinion is the NeverWet hack is a winner.

[@KayakhacksFishing]

My next idea combines Neverwet with another hack with Neverwet used where it will not abrade off.

[@LarryTalbot_1313]

I'm looking forward to that! If it works, I'll be the first in line to buy another treatment!

[@cwatson42785]

How long did it last for you? A couple months of casual use?

[@coburnlowman]

After watching these vids I was reminded of the Rainex I picked up this morning for my windshield. That was a disappointing test. I think ill get some of this stuff to keep for this purpose. Thanks.

[@KayakhacksFishing]

Actually, after more testing, the best solution only costs a penny or two - duct tape - kzbin.info/www/bejne/r5SamGOZfNdniMU

[@ahilbilyredneksopinion]

I'll still use it. Thanks.

[@diddybushcraftnoutdoors8072]

After watching the first video yesterday I went to the basement and found some silicone spray I use on tents and boots and sprayed one end. Then ran it under the sink water today. It ran off real quick while untreated end dripped for several seconds. I don't think it would last long in water, though. I may try the duct tape mod. I'll be paddling in fresh water. Thanks for the great tips, I'll be watching more videos.

[@KayakhacksFishing]

The duct tape is the best solution! Cheap!

[@jacethornton4103]

Have you thought about applying never wet to the bottom of tour kayak to aid in reducing drag?

[@KayakhacksFishing]

Two things - I think the Neverwet would duplicate waxing and the racing guys proved that waxing actually slows their kayaks ( kzbin.info/www/bejne/r5aTg5x9qpqsopY ). Second, it would be way too expensive to cover the broad surface for something that would wear off as you drag the boat, deal with mud, grass and other things that rub against the bottom. But... good thought!

[@jacethornton4103]

Kayak Hacks Fishing: Awesome. Thanks for getting back to me.

[@LarryTalbot_1313]

I agree, it would be just like we found with our paddles, but worse. One good oyster rash and there goes the whole application!

[@Gkitchens1]

It would not be worth the time. It would wear off quickly along the bottom of the kayak. It's a temporary coating not permanent.

[@JB-il8cw]

Can you do a video on keel tape? I live in Leland area and my kayak really gets scratched up.

[@KayakhacksFishing]

The fishyaker channel has a few videos on that - check out what he did and the comments. kzbin.info/door/ZpdhZZnqR9BtdmCbuMaJWg

[@zigavojska1672]

can you mix silicone putty and white spirit, and coat the paddle to repel water?

[@KayakhacksFishing]

I do not know. However, I recommend using the duct tape solution - kzbin.info/www/bejne/r5SamGOZfNdniMU

[@cjapplesauce4841]

Have you try flex seal? Can you do a flex seal hack for dripless kayak paddle? Greatly appreciated

[@KayakhacksFishing]

I stopped looking for coatings when I found this cheap trick - kzbin.info/www/bejne/r5SamGOZfNdniMU

[@kambo209]

what if you coat never wet on the bottom of the boat? will it reduce friction?

[@KayakhacksFishing]

It would be very expensive to do that and I think the result would be the same as waxing - which actuallly slows the kayak. See this video - kzbin.info/www/bejne/r5aTg5x9qpqsopY

[@slimjim7411]

Actually it's been tested and does decrease drag on the kayak. However the result is not very spectacular. Since it's a kayak and not going very fast to begin with nothing is going to make a huge difference in speed or efficiency more than just the general design, and length/water displacement of the kayak. The rough surface acts like that of a golf ball and reduces drag by causing turbulence. Wax fills all the little voids, and makes it smooth. Which removes the turbulence, and basically increases surface area as well as weight a little bit. However again it's a kayak so the UV protection of the wax is probably worth the performance loss. Since UV rays like to degrade plastic.

[@yamama259]

What if you coated just half the paddle with Neverwet, from the shaft down, leaving the very end of the paddle uncoated. Would the drips hit the neverwet and drip off anyway? This would mean you wouldn't have to worry about it wearing off the end. Just a thought.

[@KayakhacksFishing]

That is a great idea. I still have some Neverwet, I'll try it out.

[@yamama259]

Kayak Hacks Fishing Awesome!!

[@cwatson42785]

Hey buddy did you use the whole 2 cans for one application of the never wet on your paddles? Ir would you get 2 applications?I just ordered some based of your great video!! Thanks!! Very helpful! I took my first ever kayak out for 45 min (lifetime tamarack) and after I came home I've now ordered 3 things...New seat, paddle rings and now the never wet!! I got soaked my first outing. Should be all set now.

[@KayakhacksFishing]

I used one can and it was plenty. You should also dry the duct tape ideakzbin.info/www/bejne/r5SamGOZfNdniMU

[@lauragonzalez844]

What if you apply the Neverwet only on the shaft of the paddle, between the paddle and the drip ring? Would that work???

[@KayakhacksFishing]

Very interesting idea. But... I've moved away from Neverwet since the small piece of duct tape works great. kzbin.info/www/bejne/r5SamGOZfNdniMU

[@dixee6498]

Awesome hack! Thank you for sharing! 🙂

[@LarryTalbot_1313]

That's what I said on the original video, that it wears off. Almost exactly as mine did. But then again, I'm always pushing off shores, avoiding rocks, branches, etc. I use the paddle for everything, so that could be half my problem. I just can't imagine switching from paddle to pole all day long, just to avoid wearing it off it though.

[@KayakhacksFishing]

I'm with you... forget the pole. It was still on where the paddle had not made violent contact with mud, etc... so it would work fine for a paddler as opposed to a digger like us.

[@nathanfleming46]

Wonder how well this would work and what it would affect if you put it on the bottom of your kayak.

[@KayakhacksFishing]

I hope you saw the video on using duct tape - much cheaper. kzbin.info/www/bejne/r5SamGOZfNdniMU To answer your question, all we need to do is look at what the professional kayak racers do. I read a post from one team where they tested waxing the bottom of the kayak. They discovered it actually slowed the boat down. It turned out that having grooves running from front to rear increased the speed. So, I do not think Neverwet would do any good. Way to expensive as well.

[@anthonysteelman2792]

What if you coated the bottom of your kayak would it paddle easier through the water?

[@KayakhacksFishing]

No, it would wear off too fast

[@cocorkiller2322]

Did u sand the saod paddles? B4 applying it? Bc that's the only way its gana have any tooth to grab

[@KayakhacksFishing]

No, I did not sand it.

[@Samlittlesr57]

I wunder if scotch guard would work? I may try it when warm weather gets here.

[@KayakhacksFishing]

A better and cheaper idea is to use the duct tape I discussed in the other video. Works perfectly.

[@jerrettkw]

What sort of PFD are you using? Sorry if you have answered this before

[@KayakhacksFishing]

It is one that inflates by itself if I fall in. They are much lighter for summer wear.

[@chucksleeper2076]

How does rain x compare?

[@KayakhacksFishing]

I did not test that... I discovered that duct tape does an even better, longer lasting job. kzbin.info/www/bejne/r5SamGOZfNdniMU

[@Manuel_Z_Kayaks]

I saw your video on when you coated your paddle with never wet. I dont think you sanded the surface first. I already knew it would only last for a couple trips. I use it on my old work boots once a week but I'm rough on them

[@KayakhacksFishing]

A better approach for drip is to do the duct tape hack I discuss in a different video. kzbin.info/www/bejne/r5SamGOZfNdniMU

[@randyclark8207]

Have you tried rain x

[@KayakhacksFishing]

No, I figure it will just wear off like the Neverwet. The duct tape works great and is cheap - check out that video.

[@garychiang2568]

This is brilliant. A real light bulb moment!

[@KayakhacksFishing]

Thanks! A better solution is the duct tape idea I found after this one. kzbin.info/www/bejne/r5SamGOZfNdniMU

[@SHInvesting]

Thanks for the update

[@ClarkKulper]

I wonder how this would effect the handling if you sprayed it along the entire bottom of the kayak...

[@KayakhacksFishing]

I think that would be very expensive and it would wear off

[@samw.75]

Have you tried the car wax yet? I figured that might be your next video.

[@KayakhacksFishing]

I will try the car wax, but I found another very simple trick that I will share either Sunday or next Wednesday. :-)

[@geneofields8149]

I will like to see DIY Kayak Skeg Thx

[@KayakhacksFishing]

That would be interesting.

[@msueirro]

works a treat but less durable than i had hoped. Requires touch ups after every other outing. Still the best solution out there, though!

[@KayakhacksFishing]

I have another solution that will post on Wednesday - stay tuned!

[@muzlbr8k]

I tried the car wax didn't work for me I think it even made it a bit worse just my experience

[@KayakhacksFishing]

Then it is definitely worth doing a video on to warn others. What brand of wax did you use?

[@muzlbr8k]

Kayak Hacks Fishing just regular turtle wax the cheap stuff lol

[@KayakhacksFishing]

Thx. I'll try a different brand

[@Gkitchens1]

Neverwet is a temporary coating, it's gonna wear off eventually and need to be reapplied no matter what.

[@KayakhacksFishing]

Yep. I have a later video that shows how to use duct tape to achieve a better result.

[@Gkitchens1]

@@KayakhacksFishing excellent! I'll look for it

[@KayakhacksFishing]

kzbin.info/www/bejne/r5SamGOZfNdniMU

[@Gkitchens1]

@@KayakhacksFishing thank you!

[@edwardegnor8812]

Nothing is permanent lol gotta maintain it reapply at times common sense. Works very well

[@KayakhacksFishing]

yep

[@cwatson42785]

Would it last a couple months of maybe going out casually 2 or 3 times a week? Thanks!