UPDATED! Simple Install of DLSS 3.7.20 | Graphics and Performance Update from NVIDIA | MSFS2020

[@hughactor691]

Do you have the link to setting up the DLSS tweaks software please ? You did mention it in the video but there is no link for it here

[@IslandSimPilot]

You're correct, it's now number 4 in the description. Thanks for catching that! kzbin.info/www/bejne/hqDaqpxpaZiVb5I

[@hughactor691]

@@IslandSimPilot Thanks - I was looking but couldn't find it - thought I was going mad LOL :)

[@prayasbasnet9055]

You make really great quality videos man. I've been following you ever since I discovered your channel a couple of months back. Also, you sorta provide update support for the stuff you recommend too. That's extra nice. Keep up the great work 👏🏻

[@IslandSimPilot]

Thank you so much, I truly appreciate the support!

[@corneliuslewis8844]

Thank you so very much for this video. I have a 4090, 13900K, 64 GBs RAM and my visuals were never really that good and I couldn't even see the inside of my cockpit too well. Since I updated my DLSS using the swapper instructions in your video and used DLAA my visuals are 100% better. Again...thank you so very much! I strongly urge everyone to follow the instructions in this video. Thanks again...take care everyone!

[@jakeperl5857]

Thank you for this tip! As a side note, DLSS Swapper could never find MSFS in the past so I always had to do it manually...just downloaded the latest version and am pleasantly shocked to see it has finally found my sim!

[@StallSpinCrashNBurn]

DLSS Swapper is not finding my MSFS, which I've installed on its own SSD. Has anyone found a method to find MSFS if it's not in the default installation folder?

[@dannyboyy31]

Thank you, this channel is super helpful. I just upgraded to a 4080 Super so I want to take full advantage of its DLSS capabilities in MSFS. Your guides are very clear and simple to follow.

[@I_Evo]

I tried frame gen in the past, yes I got the extra FPS but got all sorts of flickering of aircraft lights etc. Now I'm quite happy with Auto FPS and Lossless Scaling and getting great performance out of my RTX 2060.

[@rafadominguez6577]

Thank you very much for your great tutorial, after the installation and running DLSS 3.7.20 with my Simulator my FPS goes up to the double... it's amazing !!! Thanks a lot

[@Virtusim]

I checked earlier this week for the dlss update. Will do it tonight., Thanks buddy

[@IslandSimPilot]

You got it, my friend!

[@petkez]

Great video, however, I disagree that DLSS with DLAA gives the best picture possible. It all depends on the hardware you have, I have a 4090 & 7950x3d in 4k and DLSS is horrible no matter what settings I use. I can't get away from fuzzy gauges and ghosting. For me DX11, Anti Aliasing = TAA, Render Scaling = 100, V-SYNC = OFF in MSFS but set on in NVIDA setting and Ultra setting I get crystal clear gauges, silky smooth and crisp scenery and 45 - 75 FPS. If I turn on Lossless I'm around 120 fps. But I don't really need lossless.

[@VerdadDivinaVerdad]

I have a 4090 and agree with you. Have you tried turning off antialiasing? it is the best I found for clarity (Better than TAA) but with small amount of aliasing which I don't mind at all. I fly VR only.

[@peterbuhler1202]

Thank you once again, your videos keep me flying in a good space. Pete

[@slizzy418]

Tested the new version with preset E , F , G but I mainly fly TAA on 3440x1440 Here’s the results DLSS 3.7.20 Preset E DLAA : Less ghosting but quality is horrendous and gains are minimal 5 FPS in my case DLSS 3.7.20 Preset F DLAA : a bit more Ghosting, far objects look better performance gains are similar To E DLSS 3.7.20 Preset G DLAA : Surprisingly this preset look better but more ghosting and less performance gains compared to F & E Verdict if don’t mind the degradation in visual fidelity and mostly fly GA go for you wouldn’t notice cause the screen is in you face anyways but if you fly airlines stay away unless you have a 4K monitor.. PMDG planes seem to handle DLSS better if you’re using 1440p though fenix and ini a300 are rather disgusting but hopefully devs live up to their promises with SU16.. Thanks islandsimpilot for another amazing and enlightening video.

[@VerdadDivinaVerdad]

Thank YOU for sharing this.

[@CRAZYHORSE19682003]

I ALWAYS recommend using DLSS in combination with DLAA. That way there is NO downscaling at all.

[@mosheflute]

Thank you for your so many wonderful videos! I have 4090. Do I still need the DLSS Tweek system? Thank you again!

[@brucewayne4211]

Your videos have been very informative and really been good for those of us that try to get our MSFS running right. The one thing I noticed is that you never mention if you're using "AutoFPS" or "Lossless Scaling" or both in conjunction with your settings. Could you please clarify that.

[@athgt6630]

Thanks for sharing a howto that can be useful to newbies too 👍

[@mikecoffee100]

I did the DLSS and new Nvida driver and as far as I go with my 2060 which is quite good.

[@IslandSimPilot]

Mike Coffee dragged kicking and screaming! Nice my friend.

[@emadreviews]

I'm a bit confused. What was the first half of the video about and what was the second half about? Started off with Swapper and went into DLSS tweaks. Are these A and B components of the same process or are they each different ways to achieve the same thing?

[@JenniferinIllinois]

I have no gone down this rabbit hole yet but do plan on it. Would like to squeeze a bit more performance out of my 3060.

[@IslandSimPilot]

Updating the DLSS file is super easy and no harm can come upon you. :)

[@JenniferinIllinois]

@@IslandSimPilot LOL! That's what CrowdStrike told everybody when they said they were sending out an update. 🤣

[@VerdadDivinaVerdad]

@@JenniferinIllinois 🤣

[@Kovboi]

Really trying to get this to work right, I have a AMD Ryzen 7 3700X 8-Core Processor 3.59 GHz 32GB Ram, and a RTX 3080. With your settings you have I'm still getting pretty good quality but it's not usable. Guess my CPU is just getting a bit long in the tooth huh?

[@joerihuffmeijer3247]

Thank you very much for this video, MSFS can use all the performance it can get! A quick question: does using OpenXR have any impact on this? Is there a way to return to the original settings?

[@captain6198]

I've been using the Frame Gen trick with RTX3070TI, it doubles the FPS mostly, but for pop-up windows it creates a rapid blurry vision on movement. Does this way help with that? I don't use DLSS because it blurs the numbers or changing textures, which is quite obvious when changing any digits.

[@CRAZYHORSE19682003]

I was dissapointed, I didn't see any FPS boost in VR from the default DLSS file v2.4.3 to 3.7.2 in VR

[@tomc1380]

Same here with PCVR. I noticed as very slightly improvement with dlss 3.5.10 over default, but nothing significant after that. Also, no need to use swapper. Just replace files manually. Not exactly rocket science.

[@CRAZYHORSE19682003]

@@tomc1380 True, but I like swapper because after most updates the DLSS file gets reset to 2.4.3. SO it lets me know I have to reswap the file.

[@tomc1380]

@@CRAZYHORSE19682003 Ya, good if you think it helps mate. I just go to the directory the dlss file is in, hover over it, and it lists the version number.

[@xkoote]

We really appreciate the videos!!! One question. Do you have any preference these days between the normal or Tweaks edition?

[@IslandSimPilot]

I like the Tweaks edition and preset E. I run DLSS-DLAA.

[@CaptRajuseriousflightsimmer]

Hello do you have a Tweaks edition video, because I have a monitor like your 1440 but when set DLAA image not good, I want to try your tweaks & settings.

[@jcsk8]

Thanks again. Testing now.

[@MikolajNowak-r2t]

Hey i got small problem i dont see msfs after i downlaoded the swapper i got microsoft store edition and i ucnechekd hide non dlss game

[@piztov]

gday mate. my msfs does not show in dlss tweaks. if i check to show non dlss games it shows but where it should have version it says NA and if i click 2020 it says dlss was not detected?? please help thanks

[@richardPalmisano]

ok when you drag or copy the files in your content folder or the location if you have stem version what happens if you decide you want to go back to the default settings and not use the tweaks and frame generation files where will the default files be that you over write so you can go back to original settings

[@ScottSAS100]

Quick question, and apologies if you had already addressed this: But if we have BOTH DLSS Tweaks AND the DLSS Swapper, is the end result exactly the same? In my case I have used DLSS Swapper to update to the new version, and did NOT do anything with DLSS Tweaks. So long question shorter: do they both achieve the exact same thing? Thanks!

[@gregprouse1173]

What about in VR. I have a 4090 and varjo aero. I hear the latest version has a performance hit but what is your recommendations. Also how can I open up ultra quality in the game settings as my dlss tweaker cannot find my game file and I’m not sure where to place it when trying the move copy files across from the app interface. I’m using open xr and up scaling to 4800x something. Also what do you do for anti aliasing fuzzy lines and on the horrizon etc and bushes and trees? Thanks

[@Skaska]

Hello. What Driver can you recommend with this DLSS version? I still use 556.12. Works best for me.

[@douglasrobinson7857]

Hi, are the Nvidia settings worth using? I've set my FPS to 78 to stop the GPU chasing frames, I'll give your settings ago tonight.

[@reyromer]

😇Thank you brother 😎, a hug of peace ♥

[@IslandSimPilot]

To you as well brother! 🙏🙏🙏

[@grandgta5]

hey can you make a new video on the lossless update it has 2.2 now and im getting way too much lag input than i was before and has some more options added. would be greatly appreciated lossless is on 2.10.1 now

[@IslandSimPilot]

Sure can, I will probably do that tomorrow. Took today off to go flying. :)

[@richardPalmisano]

hello my friend I was wondering would I see a difference in msfs using only the dlss swapper and not frame gen mod and tweaks mod with my 4090 i would love to use all of them but I'm a little nervous about the install and set up so all I have set up now is dlss swapper latest as in your video and if i dont have frame gen mod and tweaks installed the frame generation option in msfs is pointless right? thanks

[@Spinkleton]

I simply replace the DLSS and DLSSG files in my XboxGames>MSFS>Content folder with the files from techpowerup. I don’t use any swapper.. Isn’t that sufficient?

[@IslandSimPilot]

Sure! DLSS Swapper is usually a few days behind the Techpowerup release.

[@fehmiofficiel3168]

I need some advice please .. I have RTX 4070 SUPER My monitor is a samsung 43-inch 4k When I use TAA with 4k in ultras settings I get between 55 to 65 fps, and it is smooth.. When I ise this nvidia dlss ( dlaa), I get more fps, but the quality of screen in fenix is very medium ( pfd , mcdu) .. Should I continue with Taa, or is there a solution to improve this dlss

[@dronesim]

There are three different versions for this dlssg-to-fsr3. How do I know which one to use?

[@HubAir71]

Does it works for RTX 3080 TI ? Thank you so much for your great video 😊

[@IslandSimPilot]

Yep! That's what I have.

[@Dougie2945c]

Hud is shimmering badly after this update, anyway of reducing it?

[@user-wq7kx5bs1i]

Frame gen mod work with only 40 series, or can we use it with a 2080TI, I also keep getting CPU Limited by, and I have the 3 CPU graphic setting almost as low as they can go, my CPU is 10900 kf OC to 5.2 on all 10 cores and thank you very much for all your vids, they are good and give a lot of info, Thank You I do not know why my comment did a @ I was just trying to post a comment lol, I'm a noob on youtube

[@IslandSimPilot]

Frame gen mod is for 20 and 30 series, 40 has native fr gen. And thanks for the support!

[@user-wq7kx5bs1i]

@@IslandSimPilot thank you, I will try turning it on and see if it helps any, I think my CPU is holding me back I had to turn terrain and objects way down to around 50 if I remember correctly, what is baffling me I have my CPU OC to 5.2 on all 10 cores and hyper threading off. Any how thank you

[@user-wq7kx5bs1i]

@IslandSimPilot Ok I turned Fram gen mod on in the sim, on my setup it seemed to make things worse, with that being said the other info/stuff made the sim much better I mean almost 100% better then how I have been using it. I really do appreciate all the help you have giving us to make flight sim much more enjoyable THANK YOU VERY MUCH!

[@CaptainMUAL]

I fallow you everything but I cannot get frame gen in game graphic setting

[@IslandSimPilot]

HAGS on?

[@CaptainMUAL]

@@IslandSimPilot what is it?

[@IslandSimPilot]

Hardware accelerated graphics scheduling, it’s a Windows setting.

[@daniellegraham]

For the DLSSSwapper What is the default DLSS version of MSFS? I want to re-download it in case there is any problem coz I use VR.

[@IslandSimPilot]

It's 2.4.12.

[@user-pk1fh7ui9f]

Doesn't show MSFS in the games list?

[@IslandSimPilot]

Do you have all the libraries enabled in the setting.

[@WorldOfInvincible]

Please does RTX 2060 mobile support DLSS 3.7?

[@IslandSimPilot]

Yep!

[@rcbruce841]

which of the 3 mods should be used on nexus mods, universal or the 1st one listed

[@IslandSimPilot]

Hi Richard, are you using the DLSS Tweaks mod as well? If so you want the second one, DLSS Tweaks. If you are not using DLSS Tweaks and already have the FG mod set up, I would use the first one. Let me know!

[@rcbruce841]

@@IslandSimPilot i Have tried all the 1st and the universal. 1st thing i did was do a clean reinstall of sim from the store, thinking i may have messed up something. With each try of universal and the main files it is unusable as with tobi headtracking the flickering stutters is unbearable. any suggestions what i am doing wrong.

[@walkabout8911]

i dont seem to have the option to go for NVIDIA DLSS SUPER RESOLUTION OPTION

[@walkabout8911]

Getting alot of ghosting in the world map when scrolling is that normal ?

[@IslandSimPilot]

Yep!

[@walkabout8911]

@@IslandSimPilot All sorted i had a reshade active also and that seemed to be the issue with ghosting in the map so i disabled it and also got everything working perfectly thanks for your videos

[@Vozoli12]

Would this work with a gtx 1650 ?

[@IslandSimPilot]

Unfortunately no.

[@gillik7801]

can i use DLSS, frame gen mod, lossless scaling all at the same time? Is there any reasons not to do it

[@kyrasarii]

yes of course you can its a beast

[@gillik7801]

@@kyrasarii alright man cant wait to try it

[@andreasfrank2978]

why is dlss not updated with the driver update automatically?

[@IslandSimPilot]

The game has to update the DLSS file, and Asobosoft haven’t updated it since October 2022.

[@pilot_franklin265]

Do I need the update DLSS even if I have RTX 4090?

[@Inupajuk1981]

No. I have 4090 paired with 7950X3D in 4K and tested these DLSS stuff in many month. I always ended up with blurry cockpit. TAA will probably always be the best.

[@pilot_franklin265]

@@Inupajuk1981 amazing thanks for saving me

[@Inupajuk1981]

@@pilot_franklin265 No problem mate 😊 Just use Chewwy94's settings. Its amazing 😁 He have 4090 too

[@Inupajuk1981]

@@pilot_franklin265 No problem mate. Just use Chewwy94's settings. They are simple and is fantastic 👌

[@Inupajuk1981]

@@pilot_franklin265 No problem mate. I used Chewwy94`s settings. They are amazing ;)

[@hezziek3]

The DLSS tweak files you downloaded is not on the mod website where to go to get the one you specifically downloaded other than that we can only down load the one of may of this year will that work?