Updating FASTMOWERS and Troy #5 / Announce the Next 2 Builds

In this episode, I put a performance carb on FASTMOWERS, tune up Troy#5 with a new top speed, and show off my next two builds.
Please consider supporting my work with Venmo Chud327 (8704) or
Patreon - / chud327
If you would like to mail me a product to review, fan mail, gifts, etc. My address is Chud327, PO Box 687, Callahan, Florida, 32011.
I hope you like and thanks for watching.

[@Hillbillypunk]

Every time I think I'm bored with my modified mower, I watch your channel and it gets me back out there messing with it.

[@chud327]

Love that and keep them going!! Thanks for watching!!

[@codyswilley]

Awesome content man. I'm 23 almost 24. I've been messing with lawnmowers since I was 11. That's when I got my first Murray. Well my friend just gave me 6 old riding mowers. 2 of them are Murray's, a cub cadet, a troy bilt, a craftsman, and a poulan. I now have 42 lawnmowers in total. I may have a problem😂😂😂

[@Lonniell95]

Red one has my vote!

[@chud327]

@@Lonniell95 thanks for you vote and wait till you see the rear tires… gonna need a lift kit. Thanks for watching!!

[@CodysCorner104]

Awesome!! You think of the greatest things and keep it simple. Love this channel

[@chud327]

@@CodysCorner104 thanks so much and thanks for watching!!

[@kennethaustin9439]

Wow that’s definitely the smartest way of doing that carb swap great job as always chud love your content 🤙

[@chud327]

Thanks so much and thanks for watching!!

[@robertmailhos8159]

Nice conversion job on this matter of the New carburetor for the mud mower engine Chud 327

[@Robert_Mac77]

The cub sitting by the Troy built would be such a cool mud mower build. Great video always enjoy.

[@chud327]

Yes, it needs more work soon and thanks for watching!!

[@J_Beazy223]

Im can't wait to see that cub cadet live as well. But it wasn't a candidate. Craftsman with a vtwin is my vote. But john deere looks good to

[@darrellcoy]

Sweet! I vote Craftsman, Deere then Murray

[@chud327]

You voted like most others... I have started on craftsman and the Deere. Thanks for watching!!

[@J_Beazy223]

FAST mower does great in the sand! Troy does awesome wheelies.

[@chud327]

yes and yes, next I want to talk troy to the river to test the taller tires... thanks for watching.

[@cheegebvvbvvbbhggf8638]

I can't wait to see more videos and yes get that craftsmen going

[@chud327]

@@cheegebvvbvvbbhggf8638 working on them every day for have off. Hopefully soon and thanks for watching!!

[@rucebaybruce6174]

#TRUEFAN

[@chud327]

Love that and thanks for watching.

[@lordmetal3842]

red craftsman gets my vote

[@chud327]

Thanks for the vote, wait till you see the rear tires I found for it!! Thanks for watching!!

[@rucebaybruce6174]

#2 John Deere

[@chud327]

Loud and clear. I think Craftsman is in the lead, but don't tell anyone, I have already started on the Deere. Hope to work on both at the same time. thanks again for watching.

[@aidenbrock555]

Red craftsman

[@LaneProductions327]

That’s awesome! I vote you should start working on the John Deere for the next build!

[@wickedthoughts10865]

The JOHN DEER

[@Kelton-xk6bv]

Hey chud i would love if you did a second episode on the old cub cadet

[@chud327]

@@Kelton-xk6bv thanks, that is on my list. Thanks for watching!!

[@scrapyardengines9741]

The Murray would be interesting, that has my vote

[@chud327]

It is last on the list currently, work has started on the craftsman and the Deere. Thanks for watching!!

[@spudstudios3342]

i think the craftsman would be cool, but all 3 of them would be good builds!

[@chud327]

Totally agreed !! I have started on the John Deere, it is about 2/2 way done. I also found great tires for the craftsman.... Can't wait to finish both, thanks for watching!!

[@spudstudios3342]

@@chud327 thats going to be awesome! cant wait for the build vids!

[@isaacbrown511]

You were right about the intake manifold modification did hurt somebody that needed it, me lol

[@chud327]

Sorry to hear that, i actually need one too, but I will be cutting it too. Thanks for watching!!

[@ThatOneGuyIsaac]

i really like fastmowers i want to get a poulan like that because the clutch is in the middle and you have room to front pulley swap it! i say option 3 i really like murrays and would like to see another build on one

[@redneckbryon]

5:00, I wonder how good one of these carburetors would work on a V-Twin. 42:54, the way the John Deere looks right here with the front end and tires forward, looks cool.

[@chud327]

I bet they would do great, but have never tried it. I did mover the John Deere front tire but was a lift kit, not a stretch kit. Wait till you see it, my tallest yet. Thanks for watching!!

[@edevil4347]

Red craftsman first

[@Ross675]

I have some 26x10x12 off-road tires if those will fit

[@ryan76936]

John Deere, how many high are the wheelie bars off the ground and far away from the back of the mower. I made a set of wheelie bars for my mower the other day but they were too tall and stall the mower and I broke them doing wheelies.

[@coltontucker6705]

If the Hydrostatic. Transmission on the John deere work you can sell it and get some cash for more mud mower

[@lordmetal3842]

is there any chance you might could find and build an old massey ferguson mower from back in the day like a massey ferguson 12 or 14 somthing like that.? love your content

[@chud327]

I have been wanting one for years, but no luck yet... Will keep looking and thanks for watching!!

[@patrickpoulin3500]

John Deere

[@chud327]

Work has started, about 1/2 way done, wait till you see it, my biggest mower yet, thanks for watching!!

[@Ross675]

Red one with v twin

[@chud327]

Thanks for your vote, work GM has started on both. Wait until you see the tire I bought for the back. Will need a lift kit now. Thanks for watching!!

[@ronksrandom]

Could you do the John Deere first please? I have a Deere that I want to manual swap and lift so that would be perfect!

[@chud327]

The John Deere is about 1/2 way done. There is a lift kit and it is a manual now. Wait till you see it, it is my biggest build yet. Thanks for watching!!

[@ronksrandom]

@@chud327looking forward to it!

[@chud327]

@@ronksrandom thanks, me too!!

[@GoadModelCars]

Awsome

[@liljoeii6091]

I would think the Murray and the Craftsmen look good in those red rims on I'm stuck in between those two thank you for the video

[@chud327]

You are correct and I am excited about the wheels. Bought huge back tires yesterday, I guess it will be getting lifted too. Thanks for watching!!

[@dieseldan404]

You should do the craftsman build first with the golf cart wheels. I’m building one right now with golf cart wheels also it’d be a sweet to get them in the same video

[@chud327]

I have kinda started on the Craftsman. I found it some sick back tires, it will be needing a lift kit... I am about half way done with the John Deere, it is my biggest mower yet. Will try to put clips of each in both videos. Thanks for your vote and thanks for watching.

[@cheegebvvbvvbbhggf8638]

I am great to

[@chud327]

@@cheegebvvbvvbbhggf8638 great to hear and thanks for watching!!

[@cheegebvvbvvbbhggf8638]

Hi how are you

[@chud327]

So good, how are you? Thanks for watching!!

[@coltontucker6705]

Craftsman

[@redneckracing674.5]

deere. those "deere v twins" are just an intek with a diferent blower housing. they say briggs everywhere if you look hard.

[@chud327]

Cool to know and that Deere is about 1/2 way done. It is my biggest mower yet! I can wait to try it out!! Thanks for watching and for your vote!!!

[@melchristian8876]

👍👍

[@thechannel9637]

Can I have a link to the carb?

[@chud327]

www.gopowersports.com/22mm-mikuni-style-carburetor-performance-kit-aftermarket/. this looks like the kit I used. they also have real mikuni carb kits for more money. Be sure you drop my name if you order something, but I don't know if there is a discount... thanks for watching.

[@Rockcrawling101]

I’m in to lawnmowers and stuff I have a lawnmower with a 6speed on the floor I was wouldn’t if you had a carburetor for a 12/15hp single that you would be willing to send to me

[@chud327]

Probably best best to buy a new one. All my old ones were taken off for a reason, they would all need rebuilding. Thanks for watching!!

[@leefritz8860]

I vote craftsman first

[@chud327]

I am actually trying to work on both, John is currently in the lead. Thanks for watching!!

[@tonybailey6642]

Chud can you name my 1990s craftsman mower

[@chud327]

I can try, can you send me 10 facts about it? Thanks for watching!!

[@tonybailey6642]

It has a angle in the hood and it gray and it had a 12.5 briggs and then I stuck 20 hp briggs and it kind of a boxy and all that

[@tonybailey6642]

Can you give me a shout out please

[@tonybailey6642]

It's one of them craftsman lt4000 bit in gray

[@tonybailey6642]

If you can name it for me

[@joeydepalmer4457]

Ok you have a fast mower, but now lets get a great paint job on that thing and maybe some custom wheels and tires

[@chud327]

@@joeydepalmer4457 that would be cool, but it like the stick look too. Thanks for watching!! I do have a new one I am working on with the custom wheels. Thanks for watching!!

[@joeydepalmer4457]

@@chud327 ya right after writing this i noticed. cool. thinking custom looking dual side pipes that are custom glove boxes) and with a custom trunk/box. perfect old person's daily driver to go get some groceries. Thank you for posting

[@trace_redneck]

I have the same craftsman

[@chud327]

That is cool!! Hope to get it running soon. Thanks for watching!

[@scratchbuilder101]

When it died on the test run, what was the issue??? Carb related, or something else? Thanks.

[@chud327]

I needed more gas in the tank, if I remember correctly. Thanks for watching!!

[@ForClarity-e7r]

Chud question I love your vids great job! I have an opposing twin with a govenor. I put a foot pedal on and just unhooked the govenor arm to the throttle and hooked the cable up there. Do i just leave the old throttle with govenor at full throttle unhooked or take off more? Thanks for any help

[@chud327]

I usually just unhook the governor and use the stock throttle for the choke.maybe KZbin have a good governor answer. Thanks for watching!!

[@cheegebvvbvvbbhggf8638]

Which one is your fun mower to do wheelies with

[@chud327]

Fastmowers and thanks for watching!!

[@skarfaxe-hg3uk]

Could you put a dirt bike carb on where you just slide a boot on and clamp it my the carb I have don’t have the the little piece that bolts on

[@chud327]

I made the price from a part from gopowersports.com. sounds like that is all you need and thanks for watching!!

[@NeilNugent-ye5qk]

you should finish the red s10

[@chud327]

@@NeilNugent-ye5qk funny , I just mention the video I am currently working on how it is supposed to be my next project. Thank you for watching!!

[@Noah-airlines54]

i notice the lights on the Troy Bilt are always on

[@chud327]

Like daytime running lights... Saves on using an extra switch. Thanks for watching!!

[@FallinKey]

Hay chud you should drag race general lee vs fast mowers

[@chud327]

That is a super idea and thanks for watching!!

[@Spooderdudecotw]

I’m serious about trying to build a mud mower

[@chud327]

I think you should, wait till you see my next one (it is almost done), you will really want one. thanks for watching.

[@joeydepalmer4457]

Still wonder if you could remove the body that is on it ad put on1 of thoughs mobility scooter style car bodies (looks like a giant lady bug with no red or dots on them)

[@frank_III]

Craftsman.

[@chud327]

That is what most are saying, I am trying to work on both little by little... Thanks for watching!!

[@AlexShepherd-g2u]

Chud I got a lawn mower like silver bullet and it’s stock you got anything you would want to trade for it

[@chud327]

Idk, where are you located? I have plenty already, but you never know ... Thanks for watching!!

[@FallinKey]

I have a spare fnr rear end if you need it for secret agent Orange

[@chud327]

Thanks for the offer, will probably leave it like it is for now... Thanks for watching!!

[@Horninatka]

How's your son Ethan? Haven't seen him for a while i your videos.

[@chud327]

Got older and moved out. He is working and trying to be a man now. Maybe I'll tell him to sit on a mower next time he shows up ... Thanks for watching!!

[@jeriahhouf1701]

I am looking into doing this but I don’t know throttle cable i need?

[@jeriahhouf1701]

Also have an another question are die cast pulleys bad ?

[@chud327]

i have used die cast aluminum once and it lasted about 10 minutes, steel from now on. thanks for watching.

[@jeriahhouf1701]

@@chud327 I probably won’t get one now thanks. is the carb on fast mowers the $30 one or the $90 one and I don’t know which throttle cable to go with

[@Kelton-xk6bv]

Craftsman

[@jaidonnorwood]

John Deere

[@chud327]

I hope you are subscribed, wait till you see it. It is about 1/2 way done and is my tallest yet... Thanks for watching!!