Updating Your Ender 3 v3 SE: A Step-By-Step Guide

[@2013Camaro]

Thank you so much for your video. I was having a heck of a time updating the firmware on my Ender 3 V3 SE's. You did a great job explaining the steps to do it. I followed your steps and updated both of my printers with no problem. I did have to change the main system update to the 123.bin file name. After that, it was smooth sailing. The difference was the type of microsd card you advised to use. Thanks again!!

[@JustAnAverageGirl83]

@2013Camaro Awesome! I'm so glad this was helpful. Like you, I was so nervous to update cause I kept seeing complaints and problems in forums that I refused to update until I had to cause the slicing programs were not working with the printer. I'm a visually hands-on person, so watching tutorials is my passion. I was hoping this would help people in a visual sense vs reading it online. Thank you 2013Camaro (1997 Camaros have been my favorite style) for the lovely comment and happy printing 😊

[@3dprintingnerd12]

@@JustAnAverageGirl83where doni find the bin file

[@wynock8067]

Question with the SD card : I've used a different brand, but I could still format it just like you did (needed to partition it to 4Go, but it works). The problem is that the download is stuck at 0%. Any ideas ?

[@JustAnAverageGirl83]

@thibaultdesrumaux8067 Well, partitioning is not really formatting. it's dividing the mini SD card's space. The card I used is 16gb, and I was able to allocate it to the 4096. I haven't tried any other brand than the one that could only convert to exfat. So the one I specified came from my ender 3 v2, which I think may have come with the printer🤔. So, if you are unable to format it to 4096 without having to split the storage, it could work. But again, you have a different brand, so I don't know if the card is the culprit or creality is picky on their card brands. Let me know what happens when you format without partitioning. So I can give you credit that other brands than the one I suggest will work without fault.

[@3dprintingnerd12]

What do i do if it failed pls help😭

[@JustAnAverageGirl83]

@3dprintingnerd12 what is the message that you're getting? If you didn't get a message what does it look like?

[@3dprintingnerd12]

@@JustAnAverageGirl83 do you have discord?

[@3dprintingnerd12]

This filament company near by my house ha a discord and i would love to add you if you wanted

[@JustAnAverageGirl83]

@@3dprintingnerd12 I appreciate the invite, however I will decline. The file that updates the printer is called "Ender-3 V3 SE_HWCR4NS200320C13_SW1.0.6_GD303.bin. That is the second thing you're supposed to do after you have already updated the screen display using the TJC_SET Folder. When you update your printer and it still doesn't work, rename that file to 123, which will turn into 123.bin. I hope this helps.

[@3dprintingnerd12]

@@JustAnAverageGirl83i figured it out but thank you so much for always making helpful vids, u got a new sub over here

[@Aussie_spud]

Thanks this really help Edit: this might have sounded sarcastic but it wasn’t

[@JustAnAverageGirl83]

Lol! Noted, thank you for watching.