Check out my website for other awesome content! jasonoid.com/
@Brennen_Nisporic2 жыл бұрын
Sweet video. I love the idea of repurposing ryobi 40v batteries for building sweet rides on a budget. I’m planning on building an electric skateboard with x2 4ah ryobi 40v batteries. I’ve already ordered the battery adapters from eBay. I’ve also watched the video where you upgrade the power wheels too. Great work keep it up.
@Jasonoid2 жыл бұрын
Good luck on your electric skateboard build! Those have always intrigued me.
@billburkhalter4114 жыл бұрын
Relocating the batteries to the rear helps with the wheelies. Thanks for showing this video.
@Jasonoid4 жыл бұрын
These batteries give the scooter much more power :) Still working to this day, enjoy riding it all the time.
@zakbrinkhoff324 Жыл бұрын
You needs a parts list for this lmao
@MB1BillionКүн бұрын
Europe is going to get the Ryobi "HYPER CHARGER". It would charge your Huge Batteries in Half the Time 👍
@MRLAW2434 жыл бұрын
Nice work. I've used ryobi battery's for a few different projects, my crazy cart is my favorite
@Jasonoid4 жыл бұрын
You got a video of it?
@MRLAW2434 жыл бұрын
Yeah man, check my channel
@chrisl68353 жыл бұрын
This is a very good video I love how you explain and then show each step
@Jasonoid3 жыл бұрын
This was a super fun project, thinking about upgrading it again haha
@billburkhalter4114 жыл бұрын
Since you have all that room left in the battery compartment, what about storage for lunch and a can of soda?
@LL-wc4wn3 жыл бұрын
Looks like an two outboard motors on the back.. good for puddles
@Jasonoid3 жыл бұрын
Haha, it does look like that!
@Timur51611 ай бұрын
How did you hooked the wires to the battery ? And how far it goes in full charge range ?
@aureliocalderon11842 жыл бұрын
Thats syipid....adding to the list ....all the work and time buying a new one its 100% better
@Jasonoid2 жыл бұрын
This video is super old, was published before newer electric scooters were becoming popular LOL
@paulmyers29122 жыл бұрын
Great video! Would you be available for technical consulting if I run into a problem? Lol also can you make a recommendation on lithium batteries that would fit inside the compartment?
@HannibalSahura25 күн бұрын
I got the 250 one I'm bout to rebuild it
@KarKraftsman3 жыл бұрын
You mounted the motor under the bar and stock is above.
@kabevis14 жыл бұрын
I did an over-volt with 36v using lithium and burned my motor out and a few uses. I can’t imagine yours will last any longer than mine at 40v.
@Jasonoid4 жыл бұрын
My motor is a larger after market motor, 350 watt versus 230 watt. I ride my scooter quite often and it's still going strong. Probably have 25 hours on it so far. I'm surprised actually too!
@kabevis14 жыл бұрын
Mine is an E300 with a 350w that burned. Just bought a 500w and hope it holds better than the last one. Nice set up though, good luck.
@blingblingdog6958 Жыл бұрын
I’m gonna put a 50cc 2 stroke motor on mine because it is only $60 and it has a clutch
@Jasonoid Жыл бұрын
That's sweet! That will be fun project!
@philiplibby63602 жыл бұрын
So what's the run time and or mileage per charge?
@user-sh8fq7vb9r Жыл бұрын
? speed top and top distance anyone?
@tracywolzfelt81432 жыл бұрын
I have razor e 300 1 20 volt battery for backup
@mikeantony21362 жыл бұрын
how about the mount
@adonis40343 жыл бұрын
Could you make a video on how to connect the external batterys?
@Jasonoid3 жыл бұрын
I just wired red to red and black to black. No too difficult.
@adonis40343 жыл бұрын
@@Jasonoid ohh ok easy thanks! Just new to this stuff
@Jasonoid3 жыл бұрын
@@adonis4034 the motor speed controller will have a battery input set of wire, red and black. Hook them right to that.
@kymusician2 жыл бұрын
@@Jasonoid So you connected the batteries in parallel I assume? Outputting 40V?
@Jasonoid2 жыл бұрын
Yeah, wanted to double the range
@faithfulwisdomwarriors88403 жыл бұрын
Can you do this to mines?
@heavytrucks52372 жыл бұрын
I GOT AN E100 WHAT DO YOU SUGGEST. GREAT VIDEO
@Jasonoid2 жыл бұрын
I'd start with a battery upgrade first! You'll see a pretty good improvement with that!
@sebastianvargas37212 жыл бұрын
I am building literally the same setup as u are 36v 350w motor and a woostar 36v 800w speed controller with a 40v 4ah 190sum watt ryobi battery. Mine limps and turns off if too much throttle… how did u add another 40v lol i want to add a 18v Milwaukee i got there but is it worth it lol
@Jasonoid2 жыл бұрын
I just wired them in parallel so the it wasn't too hard on each battery (split the amps between each one). I had to weld that custom battery shelf to fit both batteries.
@Vastral_Nihil2 жыл бұрын
Can I use just 1 battery
@Jasonoid2 жыл бұрын
Yeah, that would be fine. The more amp hours the battery has the longer the runtime. 2ah vs 4ah v 6ah
@stuartmcfarlane6053 жыл бұрын
Could anyone help me I'm looking for this battery set up I know it been long time
@Jasonoid3 жыл бұрын
What do you need to know about the batteries? They are Ryobi 40v batteries.
@Critter08173 жыл бұрын
I really want to do this with a really big motor i have sitting around. But I want to gear it up. I'd it possible to pair two of those esc's together to divide the heat?
@Jasonoid3 жыл бұрын
I dont think that would work, you could just buy a bigger ESC, they have large high quality ones now. They are expensive though.
@bricklithium68653 жыл бұрын
Was it not possible to fit adapter and battery in compartment?
@Jasonoid3 жыл бұрын
Not these batteries, but there are many batteries that would. I just wanted to use what I had laying around already.
@paco02222 жыл бұрын
Could I do this to a 2000's E90?
@Jasonoid2 жыл бұрын
Yeah, should be a similar process
@paco02222 жыл бұрын
@@Jasonoid Alrighty, thank you!
@ori.canollie_20063 жыл бұрын
Can you just replace the motor and batteries and not the speed controller or will it not work?
@Jasonoid3 жыл бұрын
Usually the stock speed controller can't handle higher voltages. So it's best to get a speed controller that won't burn up with 40volts. The stock one only handles 12volts.
@jeffrey21994 жыл бұрын
I just did the same thing but with only one battery. I’m having trouble, when I hit full power it’s shutting down... any ideas ?
@adamlombardo34904 жыл бұрын
Hey did you ever happen to figure this out? I connected mine w one battery and it won't start at all....same set up as video
@kingcanada25883 жыл бұрын
You need two
@eatsleepplayrepeat19143 жыл бұрын
Is that an 80volt
@Jasonoid3 жыл бұрын
I wired them in parallel so it's 40v with double capacity. If I wired them in series it would be 80v.
@jeremyoshea79416 ай бұрын
Do you think that speed controller in the motor could handle a 56 V battery I’m asking because I had the same set up and I really want to put the 60 the 56 V battery to it
@Jasonoid6 ай бұрын
The stock speed controller, no. They have so many replacements/upgrades online available. Maybe the motor can but probably not.
@jeremyoshea79416 ай бұрын
@@Jasonoid I upgraded my speed controller to a 36volt looks like what you have. And my throttle. And I have the motor u have . Then I have two 36 volt hoverboard batteries
@Jasonoid6 ай бұрын
@@jeremyoshea7941 the upgraded motor should do better with the higher voltage.
@ambientartphotography22453 жыл бұрын
The motor you link to is rated at 24v, but it can handle 40v?
@Jasonoid3 жыл бұрын
It's been working fine for me for over a year.... Or whenever this video was made. Fun upgrade!
@ambientartphotography22453 жыл бұрын
@@Jasonoid Thanks Man! My 10 year old son is going to love this !
@TheClay11b3 жыл бұрын
Also keep in mind the battery is advertised as 40 volts but that is max charge, nominal voltage is 10 18650 in series at 3.6 volts each = a 36 volt battery
@shayneu94454 жыл бұрын
Question if I got the Ryobi batteries would I have to upgrade the control board or can I pass with just the battery upgrade or will that short it out
@Jasonoid4 жыл бұрын
You can try to run the stock motor controller on the Ryobi batteries, it might cause issues. The speed controller I put in this scooter was cheap and works awesome, link in the video description!
@MyDadWorksAtMarcs4 жыл бұрын
how long can you ride until you gotta recharge?
@Jasonoid4 жыл бұрын
Depends on how good the batteries are. On two good batteries I've riden over 5 miles and still had battery left. Some of my batteries don't last as long. Also the faster you drive the more battery it uses. Thanks for watching!
@clydeavaughn16564 жыл бұрын
So are the batteries holding up good
@Jasonoid4 жыл бұрын
Been great so far. I don't ride it everyday, but I still ride it quite a bit.
@clydeavaughn16564 жыл бұрын
Want more to fix go-to batteriehookup.com 6bucks a pop 40v
@Jasonoid4 жыл бұрын
They work well. These batteries can take 1500-2000 cycles!
@tanjefdol21932 жыл бұрын
Tbh it doesn’t look any faster lol
@Jasonoid2 жыл бұрын
11mph to 21mph, just a little faster lol
@tanjefdol21932 жыл бұрын
@@Jasonoid oh
@shdisbsjwvevs3 жыл бұрын
Does it have to be the e200 or can it be other types of razer scooters
@Jasonoid3 жыл бұрын
E300 and E200 have the same frame, just smaller tires on the E200. Those are the only ones that will fit the larger motor.
@shdisbsjwvevs3 жыл бұрын
Jasonoid ok thank you
@shdisbsjwvevs3 жыл бұрын
One more question are there bigger motors I can put in mine?
@Jasonoid3 жыл бұрын
@@shdisbsjwvevs the motor linked in the video description was the biggest I could fit by using the stock mounting location. If you want to build a new frame you could put in a bigger motor
@shdisbsjwvevs3 жыл бұрын
Jasonoid ok thank you so much.
@russsayscut4374 жыл бұрын
Cool build dude, i'm in the process of building my second e-scooter (check out my channel i'd love to see what you think?) i'm thinking of using the drill type battery on my razor e300 and really impressed with how you have done yours, have you done a video on how you did it? out of interest what is the range with the setup you have? I have subscribe.