Upgrading and Customizing My Tecware Phantom Keyboard! (Gateron Yellows + Dolch Keycaps)

Tecware Phantom keyboard - www.amazon.com/Tecware-Phanto...
Gateron yellows - usa.banggood.com/120PCS-Pack-...
Dolch keycap set - www.amazon.com/YMDK-Through-P...
Red accent keycaps - www.amazon.com/Doubleshot-Pro...
Join my Discord! / discord
Twitter / fresharmo

[@fresharmo]

Update vid with the shroud is up! kzbin.info/www/bejne/nKmtknmem8uCaJo

[@thejollysloth5743]

The top plate is steel, btw.

[@thejollysloth5743]

Ye, I only know it's steel because I read the listing on Amazon.

[@markn3394]

the keyboard wasnt hatswapable

[@chandupaperera44]

@@markn3394 did you see he removed the switches so it's hot swappable.

[@Nateabolic]

I bought this keyboard roughly two-three years ago. Now getting into this hobby and time to take it to the next level!

[@pjbasco1112]

A safer way to pull out the switches without breaking them is to unscrew the whole mounting plate and push the plastic stem (bottom part of the switch housing) from beneath the PCB. This takes a little more effort but if you still want your switches in one piece then I suggest you try this method. I've had this keyboard for a week and pulling out the switches with just the switch puller is quite annoying. I figured I'd do this method when I thought of lubing the switches and it saved me a lot of time and sweat trying to pull out the switches from the top.

[@fresharmo]

Good tips man thanks!

[@otami]

that would take so long

[@David242Rblx]

I take off my switches using my sister's switch puller that comes with rk61 and its very ez

[@chandupaperera44]

In my 3 years of modding keyboard time I have never broke any switches. Just be gentle with it and do it slowly.

[@harmony4f]

Thanks for the video, everything went according to plan and now all my keys work again!

[@ExplodingHeadGiraffe]

The part where you got the Gaterons to fit in the socket earned the sub from me. Definitely going for Gateron yellows now!

[@0luc83]

just spilled coffee on my Phantom lol, still works

[@fresharmo]

Oof good test ig😂

[@legendhs7305]

Phantom gang lets go its soo good

[@prodmorani]

BRO I SPILLED A FULL MUG OF CHOCOLATE MILK ON IT TOO JLASBNDGUJIOSDUIJG , i gave it a shower and im using it to type this comment xD

[@HarryUnchained]

Loving my phantom elite that came with gateron yellow. I clipped and lubed the stabs, also replaced the keycaps with olivia clone and now fitted with the original shroud. Amazing kb for the price.

[@vearykorslov1325]

whpere did you get it

[@11aqrocks]

i have the same keyboard! thank you for this i didn't know i can do customize it like this!!

[@juliusrexmercado1922]

It sounded better than before bro. Love the "thock" sound it makes after. Nice vid!

[@zopl1367]

I use this keyboard and it's amazing, I got the blue switches cause who wouldn't want that satisfying taps. for 46 dollars it's amazing, nice steel build, pretty heavy, and amazing lights.

[@DeltaModelX]

this keyboard is ahead of its time although they should link replacement switches and provide options without keycaps or switches

[@gavindailey615]

They should do that

[@doniherald7745]

Finally i know the name of keycaps, thanks dude!

[@StephenRogue]

That used to be less than $40 a few years ago when it was released

[@jef8278]

aparently the've made some changes to it now. The font appears to be changed compared to older models and iirc there is now double layers of foam inside to dampen any metallic sound. Small things like those.

[@MonteKristof]

I bought one today, It's between £55 - £60 ($75 - $80) now. I've been hearing left and right it was under $50. I wish it was :) But I've heard only amazing thing about it. Can't wait to receive it!

[@0luc83]

@@MonteKristof Bought mine for 50,- around a year ago, was really happy until i spilled coffee on it a week ago

[@xornedge8204]

@@jef8278 still doesn’t work or i got the old at full price because i bought mine about a year ago and it was £60 with all the bad features and no foam inside.

[@y2kenh]

This might be the best video of the year. At first anyone who's read the Tecware box knows that swapping only works from Outemu to Outemu-- i found the pins are 1.2mm while gaterons are 1.57. I was going to search vids on filing down the contacts as mentioned by reddit when I came upon this first. U just squeezed them narrower! 11:29 That's brilliant! You got me all excitied with possibilities now, though i still have longevity concerns with this pcb b/c it seems 20% of amazon reviews mention failures within a month to 6 months.

[@fresharmo]

I'm glad you found this helpful! As far as longevity is concerned the PCB has been fine for me after using the keyboard for a year. But I've only swapped the switches once so I don't know how long it'll hold up if you're frequently swapping switches.

[@y2kenh]

@@fresharmo I'm looking at the zoomed in pics of the gats on banggood and they don't have the cut out for the surface mounted LED on the PCB. Did yours have the opening?

[@fresharmo]

@@y2kenh no they don’t but because the housing of the switch is clear the rgb still slightly shines through.

[@y2kenh]

@@fresharmo hm, that's not what I mean: the pcb has a pretty large cube which is the LED which would prevent most switches from sitting down on it unless there was a cutout like kailh boxes do

[@y2kenh]

@@fresharmo Took another look at your gats and looks like they still fit regardless, cool! thanks for responding

[@danielf6585]

thank you so much bro i needed this

[@blakekauffman9954]

As a person who owns this board and has outemu reds, the yellows do make the board sound very different.

[@yongliyan7142]

damn...i just got myself a tecware phantom elite two hours ago just to hotswap it with the gateron switches... how great if i saw this video a bit earlier

[@jenniferw8963]

Your keyboard looks so gorgeous with that keycap set! I love it! Sounds so good as well! I just picked up the black Royal Kludge RK987 the other day. I got it with the Brown switches (soldered) for only $49 with $5 off coupon. I am using it on my new Mac Mini M1 w/ bluetooth. I don't really game much and just wanted an alternative to the overpriced horrible feeling Apple Magic Keyboard. This keyboard is a dream as well. I really love these brown keys. (I have also used the red keys and like the linear feel.. I imagine your yellows are a dream). Anyways last night, I just bought the same keycap set you bought in this video; thanks for the link! Amazing the quality and aesthetics you can achieve with just $75 :) This RK987 absolutely destroys the Apple Magic Keyboard in quality and aesthetics. This keycap set perfectly matches the silver Mac Mini M1 case with the black apple logo on top of it. (I keep the backlighting turned off.. it's only a white light on the keyboard I got.. but I dont' really care for lighting nor the extra power consumption on bluetooth keyboard).

[@fresharmo]

That’s awesome! Thanks for sharing!

[@lowbeam5005]

Dudeeee you can't imagine how fortunate I feel of finding this, I've been planning on buying this keyboard for a long time and I always wondered how much it could be upgraded, nice video, keep it up!

[@fresharmo]

Dude thanks so much!

[@bluerune7305]

for 50 bucks the board isn't bad right out of the box although i do agree with him the red switches aren't very good. Gonna be upgrading mine soon :)

[@lowbeam5005]

@@bluerune7305 Same! I can't wait to put yellows on this, I can survive with the red ones until I get the new switches tho, checked a lot of sound tests and they sounded just awful on the previous version of the board

[@shanksisnoteventhatstrongbruh]

i would have taken the opportunity to lube the switches and mod the included stabs since you went through the trouble of taking all of those switches off. Good video anyway and thanks for showing how to fit gateron in this keyboard i have been looking for this info since early 2019

[@valerianmp]

How do you mod the stab in this keyboard?

[@shanksisnoteventhatstrongbruh]

@@valerianmp Remove the switches for all the keys that have stabs, than with a tiny screw driver pull the tabs on each stab upwards. Tear them down, lube them, clip them and also bandaid mod.

[@happycroissant326]

Try putting music over the time lapse and in the background. Just a thought I think it would sound good

[@xornedge8204]

My mod was putting a black tape piece on those LEDs above the arrow keys. And a foam inside which sure helps with the brown switch noises, but it barely helped with the metallic clang. Might try buying Gateron reds but I am planning to get a Keychron K4 96% keyboard instead of my TKL. I like having a numPad since I like to type. Funny enough I’m typing this on a phone.

[@maxbojdo9141]

Hey, so for the switches, is all you have to do squeeze them with the pliers? I am thinking of buying gateron yellows but I want to make sure I know what to do with them once I get them lol

[@Gearsandco]

there is still a lot to with this keyboard to sound great, Lubing and sleeving the switches and that's what is did to my Gateron yellow and they sounded and felt insanely good and I also added tape mod and foam and even do the holy mod and cube the stabilizers it takes a lot of time but trust me you will not regret it.

[@rodgal87]

awesome vid, just got this one as my first ever mechanical keyboard and ordered some pudding keycaps online so I can swap them in. Not going to lie though, your keycap colour scheme is sick.

[@fresharmo]

Thanks man thats awesome!

[@xMugen6]

Thanks for this video mate I had recently gotten this keyboard 2 months ago and had already put keycaps and a shroud, soon to adding switches. (P.S. if you didn’t know Tecware has shrouds for these in case your into that👌) Edit: I just saw your other vid on this keyboard with shroud. Nvm then😅 lol

[@mattkins752]

thanks for the help! the key switches are suuper hard to take out

[@HalusiraptorID]

I broke the taps on outemu blue when i tried to take it out lol. Yeah its super hard

[@siruis7300]

Yall got any tips on how to get it out a bit easier

[@wsketchy]

I initially planned to get some tyrfing thing or something, but it was out of stock, and I saw this was a similar item so I got it. Glad I did. Didn't even know it's that popular, any time I look up something about what fits in outemu hotswap I see phantom owners lul

[@jef8278]

My only mech keyboard experience is with a razer 2013 with cherry blues. I tried a membrane gaming keyboard that was surprisingly very linear and was enjoyable to type on. I was thinking of getting gateron reds, but would your recommend browns, reds, or yellows?

[@fresharmo]

It’s all preference. But browns are very different from reds and yellows. They have a bumpy feeling similar to blues while reds and yellows are smooth and linear. I personally love yellows over reds. They’re better quality feeling.

[@mashenathan9781]

15:24 try lubing & band aiding the stabilizers to remove the rattly sound

[@g4egk]

The stabalisers are fairly good stock, obs modding would make even better tho.

[@gavindailey615]

I love mine I have new keycaps and everything on mine it works very well after 1 year

[@SensibleClem]

Great Vid! now I can go buy gateron switches, BTW open it up and place a dampener material in the chassis, it really helps

[@fresharmo]

Thanks! Yea foam dampeners and lubing the switches and stabs would be the next big mod.

[@____-ku3cd]

Did the switches come 5 pin? If yes, do you need to cut off the two plastic ones to get them to fit?

[@thespuds130]

How did you fit the Gateron switches in when there is a LED light in the way?? Did you have to trim the switch at all??

[@josephkhong3654]

did u do anything with the keyboards? or u just change the switches from outemu red to geteron yellow?

[@fresharmo]

just upgraded the switches and keycaps

[@alexekserci6753]

I got gateron yellows for mine but they didn’t fit because the led white thing blocked the switch from going in. There won’t be a problem with the linked ones in the description right?

[@thelegokillers]

How did you get the gaterons to work with the SMD leds?

[@theworstones69]

newer phantoms with prelubed stabs and foam under the aluminum plate (i know because i just got mine a couple days ago)

[@smolasianboi1128]

me too

[@YexnyXD]

It wouldn’t be that large of an upgrade, but to make your keyboard look and feel nicer and can put one of the black shrouds on that the sell separately

[@aureum1464]

Ay i also did that in my video (swapping to gateron) but did it with 46 gateron cap v2s!

[@anhtree4731]

I just want youtube to know this was a great recommendation for me 😌

[@xavierlervine7535]

What is other switch tht can fit in this keyboards? With all cutting the pins thingy?

[@myrrhlk2078]

How flush should the switched be? The top part of the switch wont go in for me.

[@rachelmarie2666]

Looks good m8 have you modded her further since?

[@_bleufort_4715]

i saw you broke some plastic part of the switch in 10:32, happened to me too when i tried pulling out my switches

[@erenguner6700]

I got gateron yellows yesterday and tried to fit them in but it won't go in because of the light? How did you fit them in?

[@fresharmo]

Try forcing it a bit and if that doesn’t work drill out a hole in the switches to make room. But they should just fit like mine did.

[@Poosan_]

Will milky yellows fit in this?

[@toStringy]

You don't show any RGB after the modding - is that because it just doesn't work very well with these keycaps?

[@fresharmo]

Yea the keycaps aren’t shine through so I turned the rgb off. The rgb can still glow under the keys but I still left them off.

[@Jazz861]

@@fresharmo What about the switches itself? I see Gateron has no "hole" on the bottom to fit LED. How did you solve that? I saw someone on the internet cutting the holes with soldering iron.

[@fresharmo]

To be completely honest I have no clue how they fit due to the led but they somehow do lol.

[@fresharmo]

I kinda just pushed them in and they fit without issues

[@Jazz861]

@@fresharmo Thanks for the answer! I'm tempted to do the same.

[@munkitcrossfire]

is there any outemu switches that has the same characteristic as gateron yellow?

[@MonteKristof]

I bought this keyboard today. I know it has Outemu switches. Do any Cherry MX keycaps fit on Outemu switches?

[@fresharmo]

Yep!

[@midgetazzy2584]

did those let the rgb go through?

[@deesevrin8570]

Hah! Budget baller! We've got the same keyboard mouse combo. Well, almost. I still have the stock everything with blues.

[@deesevrin8570]

My man, what is up with your pocketknife and it's half mast pocket clip?

[@fresharmo]

😂

[@mohdhilmi1622]

Outemu pcb board compatible with gateron/mx cherry switch?

[@mattkins752]

if you want to get a 60 then get the rk61 i returned mine because i need the f1 etc and the arrow keys

[@rxiken]

So what are the options i have to hot swap?

[@mathewbrancecum1742]

pls make review of tecware phantom+ 87 which is usb c detachable and with tecware prelubed wraith switches.

[@azerul1055]

thanks, my first time pulling out a switch and i thought I'd break the damn thing and render that specific switch useless xd

[@ykradd]

the keycaps you put in the description, can you use those keycaps for blue switches?

[@fresharmo]

They’re good for any mx style switch. So yea

[@KevDraws]

How were you able to sit the switches flush all the way into the keyboard? I have gateron milky yellow pros and I can’t fit them all the way in because the smd led that is on the pcb crashes against the closed bottom housing, as the otemu reds actually have an open space to accommodate this physical led. Thanks! (Great vid btw.)

[@fresharmo]

A lot of people seem to have this problem and to be honest I don’t know why. The switches I got also don’t have the cutout for the light but I was still able to smash them in and get them to fit. How old is your phantom?

[@KevDraws]

@@fresharmo I’ve had it since August of 2022.

[@KevDraws]

@@fresharmo …and by smashing, do you mean you literally just pushed as hard as you can and somehow fit them in there?

[@fresharmo]

@@KevDraws yes I forced them in but it wasn’t really hard which is why I think maybe tecware changed the design which makes the lights more intrusive. If you want, you can perhaps take a drill and drill out a hole for the leds with a small bit.

[@airelxdd4568]

what's the keyboard cleaner thing name? i need those

[@gatoss7593]

I got low profile one, i love it, it hot swapable, but to get low profile switch is a pain

[@McJiggleNips619]

Oh also where'd you get that desk?

[@robinmacatangay5192]

It says on the tecware website that the switches that are only compatible with the PCB are outemu switches, so how did you manage to use gateron switches?

[@robinmacatangay5192]

I currently have this keyboard and the switches currently are outemu blues, I want to switch them with either gateron yellows or gateron reds, but I'm afraid that when I buy them they will end up not being compatible with the PCB.

[@fresharmo]

Follow-up vid with this keyboard in the works....

[@timominnich3461]

let’s gooo

[@timominnich3461]

approximately how much longer lol

[@youngrex022]

Yo how many pinks does the tecware take cuz I’m boutta order the yellow but they are 5 pink please help

[@dingus3161]

its a TKL/87 key board

[@ZetaMotions]

was thee any interference with the keycaps?

[@4cid950]

Can i put cherry mx speed silvers in this?

[@caveman4191]

bro you should lube it, i lubed my oetemu reds on this keyboard and it sounded heavenly...

[@caveman4191]

and add foam and lube the stabs

[@fresharmo]

yea I fs want to lube the switches in the future but at the moment I don't have the tools or will.

[@Billy_The_Frog]

same, i lubed mine and the spring ping completely disappeared. My board sounds amazing now if i do say so myself.

[@vivianyyd]

how did you open them up? I found it pretty difficult to pry them apart

[@yuzu1457]

have you seen Tecware Shroud? it should look great with your keycaps!

[@timominnich3461]

what color do u think would look better white or black

[@yuzu1457]

@@timominnich3461 personally, i use the black one to match my whole setup

[@mangu4558]

I have the exact same pheripherals

[@abdielmateen5793]

is it compatible with gateron black inks?

[@James-rc6qq]

Weird question, would love a response lol. Do you have a link for that duster you used if you did buy it online? If not no worries

[@fresharmo]

Yo what’s up! Here’s the closest one I could find on Amazon:) www.amazon.com/dp/B06ZXSC97F/ref=cm_sw_r_cp_api_glt_fabc_HPD7BTQHNKJ16GJR0CVQ

[@James-rc6qq]

@@fresharmo BRO!!! You're such a legend. Love the content btw and I am thinking of buying this keyboard soon as my first mechanical board. Yours looks fantastic by the way. Hoping I can find some cool iso keycaps to improve mine if I get it.

[@fresharmo]

Thanks bro I appreciate it! Good luck wit your build.

[@cryonic.]

just swapped my outemu browns for some akko jelly blacks, and literally broke so many of the brown switches when pulling them out. the tool they give sucks and my fingers are blistered and stinging after using it lol

[@timominnich3461]

also tecware now makes their own keycaps that shine rgb through them just thought that might be good in the video updated

[@fresharmo]

Got em

[@greenpumafilms7710]

On my keyboard, my blue switches were no where near as bad as these ones, but then again it is the first mechanical keyboard ive ever owned so I can't compare it to others

[@abnerdanuarta9809]

Tried replacing the original switches with gaterons, but the gaterons did not sit well although they are working fine. Its like they just got in half way...are you experiencing the same problem ?

[@fresharmo]

It might be due to the led blocking the switch from fitting. This wasn’t a problem for me though and I was able to force them in

[@user-hq3qu2li8p]

Do cherry mx work on this keyboard?

[@wafeldoggo9693]

is it possible to put the holy panda switches in there??

[@Cravenly]

Ive been looking at a keyboard and I wanted to change the esc key to a custom keycap but I cant find any keycaps that would fit a Gateron

[@fresharmo]

Any standard keycap will fit on Gaterons

[@alex-cm1db]

gateron, cherry and outemu and basically every other switches use the same stem. don’t recommend buying a whole keycap set though if you are only gonna use the esc key 🤣 maybe try find only 1 keycap on Aliexpress because they have a shit ton

[@sylis6228]

i got a question how were you able to fit your switches into your pcb i'm kinda new to this stuff can you just cut them off?

[@fresharmo]

No don’t cut them off because they make the switches connect to your pcb. I just squeeze them to make them narrower and fit in the pcb.

[@sylis6228]

@@fresharmo but there three pin and the tech ware is 2 pin how would that work?

[@sylis6228]

@@fresharmo my bad im stupid i understand how the pins work i was confused i didnt know what 3 pins actually ment.

[@siwonis]

I have this exact keyboard and the switches did not fit because there wasn't space for the LED lights to fit. How did you get the switches to fit?

[@fresharmo]

I just pushed them in until they fit lol.

[@siwonis]

@@fresharmo yeah. but i have the same exact keyboard and the led light is kinda sticking up. do u have the tecware elite?

[@fresharmo]

I’m not sure. I got it December 2019. Is that when the elite came out?

[@TonyDiaz.]

I heard the Akko CS Switches fit this keyboard perfectly.

[@rxiken]

Do they actually?

[@adwaitacharya490]

Plz answer my question, do you clearly hear the springs in the yellows

[@fresharmo]

if your talking about pinging sounds while typing I dont hear it

[@adwaitacharya490]

@@fresharmo ok that’s amazing thank you so much the outemu reds on my tecware have such a loud ping I’m getting gateron yellows. Thanks!!!!

[@fresharmo]

Np!

[@AgungPrasetyoWibowo]

using dolch keycap...is it backlight supported?

[@fresharmo]

Not with these

[@timominnich3461]

what shroud do u think would look better with it the black one or he white one and u just got a new subscriber

[@fresharmo]

Thanks bro! It depends how on what color scheme your keycaps are. I personally like the black tho

[@timominnich3461]

well with the exact same color scheme in the video just with wasd and arrow keys also red white or black which one do u think??

[@fresharmo]

I’d go I with black. Simple and clean

[@timominnich3461]

thx man maybe u should do a follow up video with the tecware phantom

[@timominnich3461]

so is that a yes to the follow up vid. bc u could do it with the shroud and tecwares keycaps that they make

[@kaiju1455]

is this the regular one or the elite version? I have the regular one and my friend said it's only for outemu switches?

[@fresharmo]

I have the 2019 regular one

[@kaiju1455]

@@fresharmo would you know if your pin trick works on jwk yellow switches?

[@fresharmo]

Are those mechanical or optical?

[@kaiju1455]

@@fresharmo mechanical i think

[@fresharmo]

Then as long as the switches are 3 pin you should be fine!

[@lowbeam5005]

I'm back with another comment:) I just got this board, it's the updated version so it has nicer stabs and 2 layers of foam, I gotta say it sounds pretty decent out of the box, i'm impressed because this thing has fucking outemu reds and still sounds and feels good. Can't wait to drop some gateron yellows on it, it's gonna sound like heaven. Great video again dude!:)

[@fresharmo]

Awesome! Let me know how the mods go.

[@smj1999]

We need an update dude. Can we easily drop the gateron switches on it? Without the need to adjust the pin?

[@lowbeam5005]

@@smj1999 I haven't done any mods yet due to monetary issues, but I will give updates as soon as I do the mods. Also I think there is already a new version of the board that comes with gateron and kailh switches, but I think it's a bit hard to find. I've read you can just push gateron switches a bit harder to make them fit in this board but ofc that might be a bit risky

[@fresharmo]

Without pinching the pins to make them narrower it won’t fit

[@DV2.]

@@lowbeam5005 any updates bro?

[@kenunot6118]

Hi just wanna ask everyone after hotswapping gateron switcehs into an outemu keyboard does the rgb still shine through

[@fresharmo]

Barely. It’s more seeable in the dark

[@alchercraft7014]

But is weird how do OUTEMU switch work with Gateron switch?

[@MrBlitzpunk]

If you live in asia a good 40$ keyboard isn't all that surprising. Mine has a 65% universal hotswap board (you don't need to mod the pins), detachable usb C, programmable macro and RGB, super smooth stock stabs, hell the keycaps is super nice too with the non-stenciled elegant fonts Mine also comes with outemu red but idk why it's suprisingly smooth and silent for some reason, it feels a lot heavier than the advertised 60g bottom out too

[@shinejnn]

out of curiosity> which keyboard you were talking about? it sounds pretty nice

[@MrBlitzpunk]

@@shinejnn it's Daxa m71. Basically an rk71 but rebranded with a local indonesian brand. It's better though, since it comes with hotswap and a better keycaps for 40$. But it's wired, the wireless one comes at around 55$. I already modded mine like crazy Edit: the wireless one comes with a gateron an even has a gateron yellow option. While the wired comes with outemu

[@shinejnn]

@@MrBlitzpunk wow, very cool tho! gotta check it out for later! thank ya for the comment-😀

[@tinku1427]

are the red switches really that bad? Because I ordered my tecware phantom 87 with reds but I might return it if they are that bad idk, but if they are that bad I might get the blue switches someone pls help

[@fresharmo]

Na if it’s your first keyboard with reds you’ll like them.

[@gamerlst5691]

Damn that looks nice, i need to buy them but im in malaysia and i use lazada to buy online stuff and i cant find a legit seller to buy my keycaps etc

[@caveman4191]

trying searching on shopee, tons of them

[@BlizzardWind99]

As comment above said tons you can find on Shopee even the pbts one and also try lubing them with kyrtos 205g0 on the switches and stabs... Springs with kyrtos 105... Time consuming but in the end, you will love it even more

[@dav1d_csgo]

b68 is out in Philippines

[@literallysteel]

Bro really just turned a tecware phantom 87 into a keychron k1 💀 Jokes aside, the keycaps looks nice and the switches sound great

[@vaughnzo6976]

I wonder if this can be done with gateron brown switches?

[@fresharmo]

100%

[@vaughnzo6976]

@@fresharmo Ok, thanks!

[@fresharmo]

@@vaughnzo6976 np!

[@lakerspdk]

You could just buy Durgod K320 and call it a day!

[@maximusmcmillan9672]

i persnlaly love otemu reds

[@Ashtonj7116]

Bruh what is persnlaly

[@ughugh9749]

Do the LEDs still work?

[@fresharmo]

Yes but they’re not as bright when you put in other switches

[@josephkhong3654]

Did u buy the tecware phantom elite?

[@fresharmo]

Is that the full size one or the thin tkl

[@ughugh9749]

@@fresharmo It's the same as the normal phantom but it is hot-swappable to any switch.

[@Samporium]

TFW you get the phantome elite version and have prebuilt gateron yellows installed.

[@baums.-.2750]

Well maybe he can’t or doesn’t want a full size🤦‍♂️

[@Samporium]

@@baums.-.2750 I got the phantom elite tkl

[@billybobby7607]

I can't find that model in the UK.