Upgrading Traxxas M41 cat to 3/16" shaft

This kits now include the correct strut, also the shaft is cut to length and the brass stuffing tubes are also bent to shape

[@jamesmiller2220]

nice setup!

[@michaelgilliard2094]

also I am thinking about not using the stuffing tub when I change out the cable drive, because it only gets in the way of the cable, so a good grease job should do the trick.

[@alram3679]

Were can i find the strut ?

[@alexandernelson5427]

Wat are the pluses of upgrading the shaft

[@MARKLINMAN1]

What does this mod DO? I am getting this Boat and would like to know so i can order the MOD, i am in the US.

[@michaelgilliard2094]

Thank you very much for sharing this improvement of that cable and drive shaft 3/16 upgrades. I am in the process of doing the same to my spartan, where can I purchase this complete Assembly?

[@raylee4324]

Get from OSE or RC Boat Bitz

[@392stud]

What's the purpose its upgrading it ? Does it produce more power ? It is faster?

[@edgarramirez4464]

did you have to cut the driveshaft a little bit i I ask because I bough the same kit for my m41 but the shaft was to long so I had to cut it down a bit

[@RCBoatBitz]

we do cut them to length now but when we first started selling them they needed to be shortened,

[@okaytony187]

u should think of upgrading that shit servo and what does it change to upgrade to a 3/16 shaft? i would like to know i might just do it on mine thx

[@HappyDude1]

My shaft is gives a very loud viberation. Do you know why this is ? It happens after just 1 minute in the water and yes i put grease on it

[@RCBoatBitz]

Wrong grease or no enough id guess

[@HappyDude1]

@@RCBoatBitz Its marine grease and i stuff it full

[@michaelgilliard2094]

when will the cable kits be ready??

[@RCBoatBitz]

check the link in the last message

[@pitbikecookracing3324]

Nice boat buddy. Do you still have it?

[@RCBoatBitz]

Ive converted it to twin jet drives now

[@Cynocehali]

Can we see that please?

[@UrbanMobility]

I didn't get the point to upgrade that shaft!

[@tonyboneize]

And why did you do this??????

[@RCBoatBitz]

twice as strong

[@blackhillsrider2626]

??

[@RCBoatBitz]

www.rcboatbitz.com/index.php?main_page=product_info&cPath=124&products_id=2487

[@raylee4324]

You need to adjust your head camera down on any more videos some things couldn't be seeing what you're doing in the video. Also slow movements with your head. Informative video otherwise!