How to Repair a Polyethylene Agricultural Sprayer Tank

Polyethylene spray tanks are prone to crack either from getting dropped or from freezing temperatures. This tank is one that mounts to the back of an ATV. The tank was dropped and developed a crack. It also developed a crack that the owner tried to repair unsuccessfully with an adhesive. This will be an easy repair.
Most agricultural spray tanks (and those made for ATVs) are made from polyethylene. This is because nothing will react with polyethylene; it is very stable. Solvents don't affect it.
Polyethylene tanks have low surface energy so liquids (and adhesives) have a difficult time "wetting out" on the surface. Putting an adhesive on polyethylene is like putting water on a freshly waxed car. The adhesive wants to "bead up" on the surface. The only way to permanently repair the polyethylene chemical spray tanks is to weld the plastic as shown here.
Featured Product:
- Hot Air Welder: www.polyvance.com/Hot-Air-Wel...
View this video on our website for more information and product suggestions for this repair: www.polyvance.com/video/agric...
Chapters:
Intro: 0:00
The damage: 0:10
Cleaning (crack 1): 0:41
Grinding the plastic (crack 1): 0:51
Pushing the plastic back in place (crack 1): 1:04
Welding (crack 1): 1:18
Smoothing the weld (crack 1): 2:36
Grinding (crack 2): 3:05
Welding (crack 2): 3:19
Smoothing the weld (crack 2): 4:05
Final look: 4:30
⚠️ Important ⚠️
- Always wear proper safety gear while working!
- The length of this video is in no way representative of the actual time required to perform a complete repair and therefore should not be used for estimating purposes.
✅ SUBSCRIBE to our channel for updates on our products and tutorials!
🌐 VISIT us at www.polyvance.com
📧 EMAIL us at [e-mail]
📞 CALL us at 1-800-633-3047
✉️ SIGN UP for our email newsletter at omniform1.com/forms/v1/landin...
👍 Follow us on social media:
- Facebook: / polyvance
- Instagram: / polyvanceofficial
- TikTok: / polyvance
- LinkedIn: / polyvance
Browse our products:
- Best sellers: www.polyvance.com/Best-Sellers/
- Newest products: www.polyvance.com/New-Products/
Check out Polyvance's plastic welders and welding rod:
- Nitrogen welders: www.polyvance.com/Nitrogen-We...
- Hot air welders: www.polyvance.com/Hot-Air-Wel...
- Airless welders: www.polyvance.com/Airless-Wel...
-Plastic welding rod: www.polyvance.com/Welding-Rod...

[@zachreyhelmberger894]

Thank you for the video!

[@parthasaradhi2203]

Good and useful

[@beliver123]

Well done

[@polyvance]

Thank you!

[@sandippatil362]

Which raids use for plastic water tank repairing

[@b1ngnx33]

Thank you.

[@polyvance]

Thanks for watching!

[@Accumulator1]

Can you use strips of HDPE 2, such as from a milk carton to repair this tank?

[@sampathgamage861]

Good Job & Good Idea For Plastic Ect' Weld.. I Think Beter Welding Surface Cleaning First.. Thank's.. S'g

[@polyvance]

Thanks for watching! Yes, it is always better to clean the plastic before you start doing the repair!

[@user-dk5jp2th7q]

شكرا جزيلا على الفيديو

[@scottb7600]

على الرحب و السعة. "You're welcome." (in case google translate goofed up)

[@aldiaz33]

How would you recommend repairing stripped threads on a poly tank? The 1" hole is nearly smooth on the inside (threads are basically gone) and I'd like to install a spigot.

[@scottb7600]

It may be possible to weld a new layer of plastic inside the 1" hole and then drill and tap the hole. If there is enough meat on the outside of the hole you could always drill to the next size larger and tap that and install a bushing. There may also be oversized fittings available or possibly a helicoil.

[@dirx4651]

you safe this world and safe my money🙇

[@paulmurray1405]

Great video! Where did you order the polyurethane strips from? Thanks!

[@polyvance]

Thanks, Paul! Welding rod can be purchased from our website, and the type you get depends on the type of plastic you are working with. This video features a tank made of polyethylene, so you'd need polyethylene welding rod. www.polyvance.com/Polyethylene-1/R04-04-01-NT/

[@utumven]

I have one leaking from the square bolt hold down nuts on the bottom of the tank, how would fix that?

[@scottb7600]

It would depend on the accessibility of the bolts. If they are through bolts and you have access to the inside of the tank, you could weld over the heads of the bolts with plastic filler rod, or you may just need a rubber seal replaced. If they slip into a bracket on the bottom of the tank, you'll have to roll the tank on its side, remove the bolt and then weld the crack. Contact polyvance on their website and send a picture. With a picture or two, surely a good solution can be found.

[@28704joe]

Was that HDPE ? Show and discuss the tool !

[@polyvance]

It is polyethylene, most likely HDPE. We usually recommend repairing HDPE using LDPE welding rod because it is easier to work with. In this video, we used a hot air plastic welder to melt the rod and an airless plastic welder to smooth the weld. You can see our hot air plastic welders here: www.polyvance.com/Hot-Air-Welders-1/

[@28704joe]

@@polyvance Great ! Thank you. Just what I needed.

[@polyvance]

@@28704joe You're welcome! Feel free to contact us anytime you have plastic repair questions.

[@polyvance]

View this video on on our website for helpful information and product suggestions for this repair: www.polyvance.com/video/agricultural-repair/how-to-repair-a-polyethylene-agricultural-sprayer-tank

[@afrikagreen6303]

GOOD JOB,,,SHAME ABOUT THE MUSIC//

[@gary24752]

What is with the head banger music. Not very professional.