Use RCINPOWER 1804 motors instead of 1404 motors 💪

[@AlbertKimTV]

🛒 RCINPOWER GTS V3 1804 Motor - bit.ly/44AAHtZ

[@Zackking21]

I’d try the higher kv on a 4 inch for freestyle should rip on 4s and try the lower kv on a 4 inch on 6s and I believe that will be the sweet spot. Kv is too low for 3.5 inch freestyle you’d want to be 3800-4000kv on 4s and 2800-3000kv on 6s for 3.5 inch quads in my opinion. Give it a try! Love your content btw.

[@Bruno-cb5gk]

so happy to see some more options in this motor size, 2004 is just a bit too heavy to fit comfortably on sub 250g builds. Prior to this the other 1804 options were either just as heavy as a 2004 or not very durable. RCINPOWER has some great build quality from what I've heard so will definitely check these out with how light they are.

[@alxgag3]

Maybe a good alternative for the Micro Long Range 4"?

[@bob.w3984]

I was thinking the same.

[@AlbertKimTV]

Yes, assuming the extra 11-12g doesn't cause a loss in flight time. I have not yet tested that specific scenario yet.

[@AlbertKimTV]

Note, I think the 1604 size would be better suited for long range.

[@babc142]

Yes, especially for heavier 18650 packs

[@subsonikfreq]

I have a 3.5” build. About 300g. Running 6s. 1507 2700kv. But they run hot. May swap to these 1804. Thank you for the video.

[@longngovan88]

Quá tải lực nâng, thử lên 2006 sẽ ok

[@jaechoe]

RCInPower motors are nice, lots of punch and pretty strong. After many many crashes 1 finally died on me, the armature somehow unglued and the vibration seems to of caused some of the winding wires to break. Scary when it happened during flight ( spin of death 😂 ) when the 1 motor died. I am very happy with RCInPower motors, these 1804 motors look great. Great review and flying Albert!!!!

[@ChrisParayno]

Great explination albert for wide vs taller motors!

[@AlbertKimTV]

😁

[@MCsCreations]

Fantastic flying and review, Albert! Thanks! 😃 I wonder how those motors would behave in a 4" long range quad! Stay safe there with your family! 🖖😊

[@jlarson42]

Good morning Albert. Nice motors, I've heard good things about RCinPower motors. In my AOS 3.5 build I used the BrotherHobby 1504.5 3950kv motors. A little more pop than the 1404. 😎

[@ashingashinga]

what motor would you recomend for a 4 inch freestyle quad with 4s bateries?

[@AlbertKimTV]

This motor would work well for that setup.

[@Oxtailgraavy2023]

Hey what would be your suggestion for motor upgrade from 1404 3800kv on my 3.5 AOS EVO. It flies great but I want to do a bit of freestyle and I think 1404 is doable but it's a little underpowered to recover from some manoeuvres. I was thinking of going up to 1604 t motor pacers 3800 kv. Is that even possible. Please I'm new to this .

[@AlbertKimTV]

Either 1604 or 1804 will work for you. The 1804 setup will feel a little heavier but give you more overall power. The 1604 will be a little less freestyle friendly but give you more cruising flight time.

[@Oxtailgraavy2023]

@@AlbertKimTV thank you I think I’m going to go with the 1804s

[@bob.w3984]

I have a Bebop 2 it has 1804 motors and over 5in props on 3S. I have a 4in Diatone LR frame would work well with it

[@longngovan88]

Moto sẽ nóng

[@pandrews01]

Great review. In the past I've used your videos to choose motors for my builds. Nice review. I do like that there are more choices available.

[@00litch00]

Im trying to get a ligth waegth freestyle drone with a long fligth time, im scared that 1606 is a bit of a over kill, and 1804 is a underkill for freestyle, wath do you think is better for a ligth waeth freestyle with a good fligth time?

[@AlbertKimTV]

If you want the power, you'll have to sacrifice flight time. I've not seen any motor that's great at both. Even 1804 isn't the best for flight time. There's a 1604 motor I've reviewed before that's got very flight time. On a really light setup, it might perform well. kzbin.info/www/bejne/jGm5Z4lva8t5q9E

[@00litch00]

@@AlbertKimTV thank you so much for the atention, (+1sub)

[@kennykobitsfpv]

Is your favorite the 1605 for a 3in prop?

[@AlbertKimTV]

1506 for 3.5

[@robaxelsson530]

Got sets of 1804s from t-motor and X nova ..x nova has 3mm inner shafts and base look much better than tmotor.. wonder how these would stack up? I got them in m5

[@peteyfpv2217]

I like 1804 3500kv on 4" for freestyle

[@ItsMeKevinFPV]

1507, 3800kv, 4S.