Use VVDI 2 and VVDI Prog to do BMW 5 Series CAS4 5M48H Car key adding from www.lockartist.com

Use VVDI PROG to read data of BMW 5 Series CAS4 5M48H, and use VVDI2 to make the key adding.
For more information, pls visit our website of www.lockartist.com or contact our email of [e-mail]

[@dashtyATG]

This is my 2nd time after 11 mo ago I've been watching the whole process again absaluty amazing and as I've been practicing the soldering part I'm more capable. Thanking u all again.

[@Lockartist-com]

This video was recorded five years ago, when there were no solderless adapters. Now there is a more convenient way. Devices through ACDP or xhorse can be matched in a solder-free way, which is safer, so there is no need to worry about soldering. Learn more www.lockartist.com

[@SneekyFauker]

Make sure you use chipqwik if you're worried about overheating a component even though that shouldn't be the case if you're removing the components correctly. Relatively easy job in my opinion.

[@harryhoudini7777]

Great video.Thank you for sharing

[@Lockartist-com]

Do you need any equipment ? you can contect me WECHAT:[phone]

[@ivanbarrio1]

EXCELENTE VÍDEO AMIGOS. OJALA ALGÚN DÍA PUEDA COMPRARLO. SALUDOS DESDE ARGENTINA

[@Lockartist-com]

Buenos días, gracias por tus comentarios. ¿Puedo saber que todavía estás interesado en comprar un juego? En caso afirmativo, contáctenos de forma gratuita a continuación: sitio web: www.lockartist.com correo electrónico: [e-mail] whatsapp / wechat: + 0086-15280404219 skype: maggie82343

[@bjornhudson1699]

sorry to be offtopic but does someone know of a method to get back into an instagram account? I was stupid forgot the account password. I love any tricks you can give me

[@jalentrent5863]

@Bjorn Hudson Instablaster :)

[@ahmedwaleed6886]

Thank you We understand our step by step and detailed and thank you and your sinks and keep going

[@dashtyATG]

its a very great video and thanks for shearing your acknowledge the only things wearies me a lot is the soldering type. disordering

[@Lockartist-com]

This video was recorded five years ago, when there were no solderless adapters. Now there is a more convenient way. Devices through ACDP or xhorse can be matched in a solder-free way, which is safer, so there is no need to worry about soldering. Learn more www.lockartist.com

[@dashtyATG]

@@Lockartist-com thank you very much for your time

[@stewiegriffin6503]

9:00 everyone is shaking like that, when doing BMW cars

[@fs0c1ety_bs92]

😂😂😂😂😂😂

[@user-qe9ek7wp4t]

hhhhhhhh

[@jamesbarratt593]

Thank you.

[@Lockartist-com]

Do you need any equipment ? you can contect me WECHAT:[phone]

[@Lockartist-com]

Do you need any equipment ? you can contect me WECHAT:[phone]

[@aecelectronicayprogramacio2284]

Amigo buenos días necesito una lectura de cas3 con vvdi prog para un Bmw x1 2011

[@emanuelgodoy7349]

ITS OK AND GOOD

[@nkhan7804]

Whet to buy this vvdi2 prog from?

[@naveedchuhan2756]

Very nice job Plz BMW 745il All key lost Smart key send to video help

[@aecelectronicayprogramacio2284]

hello friend good morning or good afternoon please I want you to help me I need a juice for cas3, I have a Bmw x1 2011 and I need a dump read with vvdi prog I appreciate your help thanks

[@user-pi7te6oo2e]

Good job

[@Lockartist-com]

thanks

[@SneekyFauker]

Please! Can you provide to us the soldering temperature, air speed, technique, and method in removing the conformal coating? I performed this service with a CAS 4 (1L15Y) 2009 BMW 750i which the key creation process is successful. Old key works, new key works and can start the car. The only problem is that all the lights on the dashboard lights up! Check engine light, left head light malfunctions, power steering is half way. What is the problem with the process for it to go like this? Let me know please.

[@danielf1016]

U damage the car

[@SneekyFauker]

@@danielf1016 Hi, it's now been one year and some and I've learned a lot about BMW. To this day I greatly believe that the vehicle I was working on already was problematic. I've done about a hundred BMW cars using the similar methods that I did for the first CAS 4 and I never encountered a problem. I want to say that the car was bad in the first time before I touched it but I didn't verify. The dealership never asked for compensation at all and accepted it. One important tip I learned is to to check the state of the car before and after you work on it.

[@Jovemdaluta]

Sorry but i believe you half killed the CAS4 with ESD from your hands probably

[@dashtyATG]

@@SneekyFauker thanks for all your hard work and I much appreciated. ill be watching all you video.

[@danielf1016]

@@SneekyFauker I did yesterday a cas4+ all keys lost , with mini acdp, take me 10 min, without solder and removing nothing

[@4evermetalhead79]

Why not have both keys inside the car???? What will happen???

[@cerj1979]

can you do video with all keys lost???

[@Renegada-ei1ll]

There is an adapter for vvdi2 to cas and also to ews in the bank. But also to do this cas4 is this operation necessary? or is it possible to do it only with an adapter without the need for vvdi prog?

[@Lockartist-com]

This video was recorded five years ago, and now you can directly configure the key through OBD without disassembly

[@user-ls4ik1kl7g]

this good

[@pat99UK]

I don’t think that I’ve ever seen a worse soldering technique, overheated burnt PCB, and as far as refitting the componants, absolutely terrible. I’m surprised the Car started.

[@odosullivan]

G30?

[@mahmoudhantouli5434]

Good afternoon both tools and are they cover what can car many factors

[@Lockartist-com]

hello, sorry for late reply, please see below features for vvid and vvdi prog: The vvid 2: Support OBD function for VW, Audi, Skoda, Seat, Porsche, Bentley, BMW etc Support many transponders: Read/Write/Copy/Verify etc Support Immobilizer Data Tool and make remote Support Third - Party software, such as ODIS, VAS5054, Techstream, HDS etc the vvdi prog: 1) The built-in update software allows user to update VVDIProg firmware timely. 2) High-speed USB communication interface enable the software automatically connect. 3) Smart operation mode: the possible causes of error will be listed 4) Reserve ports: for future update. 5) The self-test function enable you check if the machine works well. 6) Can supply power via USB cable, the software will automatically prompt if the external USB power supply is needed. may i know your country site for freight checking?thanks

[@cgofficial2114]

NEWS:CGDI Auto Car Key Programmer Website:WWW.CGPROGCAR.COM my facebook :facebook.com/carcgprog whatsapp/wechat:86-15112563501

[@seyfwawino2034]

Hello!! I need products

[@mahmoudhantouli5434]

Dear friends how much cost to buy the vvdi tool

[@Lockartist-com]

hello Mahmoud, the total price for the vvdi 2 and vvid program will be US$2400.0, not including the shipping cost may i know you need both tools or only need one of them?

[@mosalamasekoa9070]

hi. could you please assist. where can i get the diaGRAMS FOR SOLDERING

[@Lockartist-com]

This video was recorded five years ago, and now you can directly configure the key through OBD without disassembly. The connection line can be browsed through the vvdi-prog software. New products can go to www.lockartist.com

[@bodyofhealth3351]

how can you get isn to program key

[@Sam-wp1zq]

with a working key, or ecu dump files (see all key lost how to videos)

[@techgeek2994]

why you dont make ke y with obd or on bench why you need soldering ?

[@RocketSurgeon540]

OBD process didn't exist when this video was made. OBD method is also risky, eeprom is safer

[@stewiegriffin6503]

11:30 NO !!! I will save it on c:\

[@Lockartist-com]

good afternoon, sorry i am not quite understand what you mean, could you pls clarify?

[@stewiegriffin6503]

The woman says: "save the BMW eprom data on desktop". And I said. No, I will save it on C:\ It's a joke.

[@Lockartist-com]

good morning, thanks for your explain, i understand now : )

[@DenPotemkin]

когда услышал бабский голос, подумал что баба сама будет делать, но нет, это всего лишь переводчица.

[@Lockartist-com]

Yes, the translator is explaining

[@BoscaMarius]

Now that's a really helpful video. 💯 Like and subscribe from me 💪 Looking forward to buy your program ✔

[@Lockartist-com]

Thank you for your attention, I will try to update more locksmith knowledge in the future

[@romdhanerafik4842]

you have VVDI prog and you don't have a professional soldering iron ???????

[@thesmartguy3523]

I know right

[@Lockartist-com]

Of course there are professional soldering irons, but operators are accustomed to using cheap soldering irons

[@mirondraghici5356]

why would anyone go trough all this trouble, dismantling, soldering when there are tools that do it trough obd?..

[@jinxxpwnage]

Not possible through obd for cas4

[@mirondraghici5356]

@@jinxxpwnage :) it is..

[@jinxxpwnage]

@@mirondraghici5356 What tool?

[@jinxxpwnage]

@@mirondraghici5356 Oh sorry you mean for adding key? i forgot to specify i thought you meant all keys lost

[@mirondraghici5356]

@@jinxxpwnage autel im608, xtool, adding key by obd port. and yes indeed for all keys lost you have to remove cas module from the car and connect it on the bench but not having to solder, just pin it by the plug

[@Zunaid1201]

What a pain to do

[@fs0c1ety_bs92]

Wait till u see fem

[@keyherobln]

thats stupid better use acdp... no soldering needed

[@Lockartist-com]

This video was recorded five years ago, when ACDP and other solderless equipment were not available.

[@salishfisher1156]

You could do a better job on videos speak more clear and loud and have subtitles to help us learn. More videos plz

[@Lockartist-com]

This video was recorded five years ago. In the future, we will learn to use subtitle files to explain to everyone. Thank you for your attention.

[@ahmadrifai6487]

too risky to do

[@Sam-wp1zq]

it is indeed risky, but good profit if you can do it.

[@salishfisher1156]

You just need to be confident

[@roshglock]

This is too much