Used Motorcycle Buying Guide | How To Make Sure Your Buying a Good One | 24 Year Old Kawasaki ZX-9R

[@krissi66x]

Thanks GW--Z9 is possibly a good replacement for an early Blade- the more I watch--read!

[@davapod]

I wouldn't allow a test drive without the cash in my hand.😊

[@TheGhosty66]

He sounded convincing until he mentioned tank rust in combustion Chambers, if he knew anything about 9R's he'd know there is a filter inside the fuel tank and another one between the petcock and the fuel pump, having said that he's right to advise taking a look inside the fuel tank for any signs of rust. On the whole good advice to anyone starting out on motorbikes, I'm 57 years old now and been riding all my life, owned 3 9R's and they are generally bullet proof, he didn't mention valve clearances so it's worth checking if they have been done as it's a big job, oh and change the oil and filter every 3K miles on the early Kwaka's and they'll pretty much go on for ever, it's an old cliche but there bulletproof engines if properly maintained.

[@colboysigmax]

Good advice! BTW I've owned my 1998 ZX6RG2 since 2000 same look as your 9R except mine is purple/black. It's mostly been my second bike and so has only done about 15K miles. It's seriously perfect "despite" its age. It's a great bike and to be honest has better quality paint on the hangers, fittings, brackets, wheels, etc than my bought new 2017 ZZR1400 PS! The message is clear, don't be afraid of or write off old bikes :)

[@deanzaZZR]

My 2003 F2 Silver was my favorite sports bike ever. When I bought it it came with a Yoshi can too. I quickly swapped it with a stock titanium can which worked just fine. They are great all-rounders especially for taller folk such as myself as I rode all around the state of California and into adjourning states.

[@DavidGerry-lt6vx]

If this bike is the same as the 636 of the same era it's equipped with a starter lockout switch which prevents the electric starter from operating when the clutch is engaged and the transmission is not in neutral.

[@RichardBos-h8m]

on a Paddock Stand you can test the gear box whit out moving the bike ! iss howe i test before bying , shifting when its rear tire is up on a paddock

[@MechanicalMooCow]

As someone that just passed my CBT, this video could not have come at a better time. I'm looking to get my full unrestricted in the next month, so this should be very, very useful.

[@WorksopGimp]

got my mod 1 on the 26th oct

[@zaydgill545]

Your clutch switch could be backwards. It's not bad though and it's easy to flip it back around. Good way to test is does it start in gear with the clutch in? If not in gear and in neutral it only starts with clutch out try taking the switch out and putting it in the other way around

[@davidgreen7870]

All right .

[@mikehawk9156]

Not sure how rust makes it's way through the carbs to the engine ..

[@majordelays4909]

How to maintain forkseals to prevent early demise ?

[@WorksopGimp]

Keep them clean

[@mattcrad8605]

Debris on the polished parts get wiped by the lip seal with each compression causing wear. That and dryrot from outdoor storage are the biggest contributors.

[@timrains5011]

Never buy a bike without a test ride, not would I expect to let the owner hold cash until I'd decided to buy it. If they don't trust you or quibble about a ride then walk away.