USING AN AUTOOL CT160 FUEL INJECTOR TESTER AND CLEANER ON MY 1300CC ALPHA INJECTORS

I PURCHASED AN INJECTOR CLEANER/TESTER TO CLEAN MY DIRTY INJECTORS WHICH I WAS ABLE TO GET SOME SUCCESS AFTER MUCH FIDDLING WITH IT. I ALSO UPGRADED THE FUEL PUMP TO A WALBRO 255 AND IN THE FUTURE I THINK IM GOING TO AD AN EXTERNAL REGULATOR AND POWER THE PUMP WITH A BATTERY CHARGER. FOR THE PRICE IT DOES ITS JOB. YOU CAN GET ONE OR ANYTHING IN THIS VIDEO LISTED BELOW
AUTOOL CT 160 ----www.ebay.com/itm/134803885698...
TESTING FLUID ---- www.ebay.com/itm/252822440778...
FILTERS AND REMOVAL TOOL ---- amzn.to/4aMdxUp
WALBRO 255 FUEL PUMP ---- amzn.to/48s25f0
BERRYMANS B12 INJECTOR CLEANER ---- amzn.to/48qhvAJ
NEED SOME LEDS HEAD OVER TO AUXITO LED -- www.auxito.com/XF9ObC-5IsvxB5 use code Schmikel to save 15% off your order
NOTE --
some links are affiliate links that help the channel at no extra cost

[@LouieLouGarage88]

Great video mike! Ill be keeping an eye out for that next video!

[@rangerst_870]

go to hobo freight and get a stepper bit. Drill out the bottom retaining plate one more size so the injector rests on the lip that below the lower o-ring. Or make a new plate out of aluminum that will hold the injectors over the holes and isnt as flimsy as that small piece of sheet metal. get at least 1/4 or 3/8.

[@notone4029]

EVERYTIME I watch your videos it reminds of the fact that I don’t have an air compressor in my garage. And how BAD that I need to buy one. Usually comes down to car parts or tools. Car parts usually WIN. 🤷🏻‍♂ Side note : I’m an autobody painter by day , so no air compressor is PATHETIC!

[@schmikels_garage]

I hear ya man car parts are usually my number 1 purchase also haha, keep at it I’m sure one day you get one even a small 30 gallon can get ya by I used to have one for awhile till I got my 60 gallon.

[@notone4029]

@@schmikels_garage yeah Thanks for the info and recommendation. Have to look into that.

[@PeterHernandez-lg2eh]

Harbor freight

[@Banks_Sinatra]

You should try the pilot or accord injectors. See if it clean them 😂

[@schmikels_garage]

🤣😂🤣😂🤣

[@rangerst_870]

I was thinking tesla injectors.

[@user-mp7hz7po4h]

What fluid you used for ultrasonic cleaning

[@schmikels_garage]

I started with some Amazon ultra sonic cleaning fluid and ended with using berrymans b12 fuel injector cleaner. I have found out recently tho that any on the shelf injector cleaner with pea or pib which have longer words I forgot how to spell but those chemicals clean the best and I found royal purple max cleaner has 5% pib so I’m going to try that next time

[@mlrable]

You should reherse

[@Mi-chal]

why do you multiply by 4 twice. the first time because it's 15 seconds long, but the second time?

[@schmikels_garage]

The first 4 is to get to 60 seconds and the second I can’t remember what the reason was but that’s what the equation calls for from all the info I found to find the cc, if you wanted to find the lbs/hr you would multiple by 4 if ran for 15 seconds then divide by 10.5

[@Mi-chal]

I want to buy this machine to check flow by 3bar.. I have a injectors but don't know what flow cc in 3 bar :(

[@schmikels_garage]

@@Mi-chal dang that stinks but atleast a machine is cheaper than new injectors. You could also send them out to a place for about $100 and have them flow and cleaned and then can tell you what cc they are

[@rangerst_870]

@@Mi-chal look for online conversions. Google is your friend.

[@vvvv-lu8zi]

Hi im not here to bug you . Im always ready to learn Im getting confused by your math.. If you could explain me please? Here what i find with my math You got around 20ml in 4 sec 1 minutes ( 60 secondes )is 4 sec multiply by 15 ( 15x4 =60) Your 20 ml x15 = 300 Your injectors is about 300cc/minute 300÷10.5 = 28.5 lb/hr

[@schmikels_garage]

The 4 seconds thing is wrong in the video. Near the end I start to test then a 15 seconds times 4 and times that by 4 again. The way you get it on a machine you can runs for a full 60 seconds is you run it for 60 seconds and times that number by 4. I can’t that’s why I have to split it in 15 and I was getting around 75ml in the 15 seconds. So 75ml x 15sec is 300. 300 x 4 =1200cc

[@schmikels_garage]

For the lbs you would take the cc number you got 1200 and divide my 10.5 which is 114lbs/hr

[@schmikels_garage]

Actually I’m wrong haha, you would only times the 15 seconds times 4 I guess which makes the most sense cause 15x4 is 60 for min. So I guess my injectors are still really messed up or that machine doesn’t flow enough cause the pump is only supplied 6v max I may make another video putting a regulator on and 12v to pump and see what happens

[@PhillyMK3]

​@@schmikels_garageyour supposed to flow wide open which I believe your machine doesn't do.