YNE3-RT: www.clickyourshop.com/yongnuo-... YNE3-Rx: www.clickyourshop.com/yongnuo-... YN 600EX-RT: www.clickyourshop.com/products...
Пікірлер: 81
@stephenosullivan90443 жыл бұрын
Thanks man! Was being driven nuts as I couldn't pair these, 30s into your video I realised I hadn't set the codes to match - completely forgot! Great video.
@jasondemao38788 жыл бұрын
Thank you for the review and tutorial. It was very helpful. I could not get my YN-E3-RT to synch with my YN600EX-RT. I had both set to ID 1. The problem, which you showed me the solution to, was that one was set to _001, and the other was set to 0001. The first digit was set to blank, which apparently matters. When I tried to set to 1234 is when I noticed. Thanks again.
@jl15155 жыл бұрын
Thank you for the great video. Could you please please do a tutorial on how to set up manual modes using the YNE3-RT transmitter, YN600EX-RT and Canon 600EX-RT? I have all three as they are compatible with Canon but I can't figure out how to use manual mode and there is not a single tutorial that teaches you.
@lauram96452 жыл бұрын
Def spared me the frustration today of syncing these flashes
@EdoHDpro7 жыл бұрын
Very good video, breaking down the hard data :))
@emanuelebarbato6 жыл бұрын
Really great video!
@lauram96452 жыл бұрын
Thanks, so helpful
@nvkoba6 жыл бұрын
Thanks great videos!
@danielaargandonalowe97644 жыл бұрын
I would like to see the camera config as well...canon user here
@stepitup54097 жыл бұрын
Hi, thanks for your video. I have three of these and the transmitter. I can link the three lights with the transmitter, but, when I put the transmitter on my camera it does not fire the flashes. I can fire the flashes by hitting the fire button on the transmitter. What am I doing wrong?
@justsuperjl8 жыл бұрын
hi, I have the exact transmittee and the flash. I have high spees sync turned on, but my pictures are still showing the black banding at the bottom. if I don't use the transmitter, high speed sync works fine. any ideas why?
@5nokta6photostory4 жыл бұрын
Thank you
@munnabhai7014 жыл бұрын
Thanks for the video. Could you please make one for Nikon? Thanks
@AnthonyMC677 жыл бұрын
I need help....when using the YNe3rt to change the exposure compensation on ETTL it does not has any effect on my YN600EX RT ii....other than it is connected and flashes. But exposure does not shows to change on the speed light as on the transmitter.
@deebo174 жыл бұрын
I have the yongnuo 560 and it's respectful transmitter. In manual I can control the flash output and the zoom. I upgraded to the 609 because of HSS but I have yet to figure out how to control the zoom. How can I do this?
@SkipODonnell8 жыл бұрын
Can you trigger the camera to take a picture with the flash?
@hiroshi7668 жыл бұрын
Can I use my Canon 600EX flash to trigger the yongnuo flashes?
@panicentertainment55237 жыл бұрын
Is the transmitter compatible with the canon speed light 430ex iii-rt?
@manolofotografia4 жыл бұрын
puedo usar el disparador yn-e3-rt con el flash yn200, directo o solo como slava utilizando el flash yn600ex-rt
@videoraulstudio8 жыл бұрын
Hi. I'm using 2 YN600EX-RT and one Canon 600EX-RT triggered by YN-E3-RT. When on ETTL looks like Canon one trigger 1-2 sec later than Yongnuo. In M mode works fine. Do you know why? Thank you !
@KeithCasper2 жыл бұрын
I really want to upgrade to the YN200 studio light, but I don't think it will support the studio light... This is incredibly sad. Is there another way to get the tow use radio ttl signal?
8 жыл бұрын
hello what about test/release buton is it work? In my case test button is not working at all...
@nathanpresents7963 Жыл бұрын
My flash keeps saying 24mm on the top middel of the screen. it doesnt change to the value the lens is at the moment. How can i fix that? thanks!
@davidyao78606 жыл бұрын
NEED HElP! I have the exact same flashes and trigger from Yongnuo, but here is my problem. When I try to set one of the flashes Manual and leave the rest in ETTL/TTL, my problem is that the ETTL are firing the flashes as it should be (judging brigness and such...a normal ETTL effect) but the Manual flash always only out puts 1/32 of the power when I fire the shutter, regardless how much I set the Manual exposure at (as in I can set the setting at 1/1 and it still outputs 1/32 light or if I set it to 1/128, it still outputs 1/32 amount of light. This is puzzling and annoying as I cant control Manual setting when im in Gr mode. Do you have the same problem or solutions?
@tonybates93657 жыл бұрын
Will the Yongnuo YN-E3-RT Transmitter + YN 600EX-RT II TTL work manually on a Fuji X-T10 and with HSS?
@emmanuellnescau7 жыл бұрын
do you notice any overheat in the flash ?? i was reading some reviews and a lot of people was talking about, i want to make sure before buy it. thanks !!!!
@manish47778 жыл бұрын
hi! when i use my yn-e3-rt with yn 600-ex my batteries in 600ex drains very fast u can say i get aprox 80-100 shots if i mount my 600ex on the camera battery does not drain i get more than 400 shots n battery indicator still shows half remaining battery ..why is it so???? and why i cannot sync yn-e3-rt for 2nd curtain sync for exposure more than 2.5 sec ???
@mhp32127 жыл бұрын
Could i be using these speed-lights (made for canon) also for GH4?
@FrostyTheBeerMan5 жыл бұрын
Hello, can I use 2 YN-E3-RT together so that I can control the flash output from my Yongnuo YN600EX-RT II flash ? I would like to be able to change the flash output using one of these YN-E3-RT controllers. One will be on my camera, the other I use as a "remote" to change the flash output..... I want to do this for bracketed shots where I don't want my camera to move while it is on a tripod. I've tried many things and cannot get this to work. Is there a way to do this ? So to clarify, I want to be able to change the flash settings with the 2nd YN-E3-RT that I would be holding in my hand... this would send that flash output change to the main YN-E3-RT that is on the camera..... - is this possible ?
@genechang39116 жыл бұрын
Will this transmitter work with a Canon 430EX III-RT flash ??? I have enjoyed watching your channel. Thanks!
@abdullahshebah39497 жыл бұрын
can't use second curtain flash YN600EX-RT with transmission YN-E3-RT ?only work 3 second why not working more
@drewilliams35557 жыл бұрын
My flash yongnuo 600 only allows me to enter a 3 digit number while my yne3 is a 4 digit id. Can't seem to link them
@horayman8 жыл бұрын
I have this transmitter, but ETTL does not with my canon 600rt. the only function that works is changing the power in manual mode
@KeithCasper2 жыл бұрын
Can the YN-E3-RT fire the YN200 with radio slave function?
@veraso19 жыл бұрын
I just got 2 YN 600EX Rte and 1 YN E3RT I have a old canon 430EX It. If I buy the YN 3RX can I full control it with YN E3RX trigger.?
@shavindraperera29348 жыл бұрын
Is this transceiver work with YN565EX II without using a receiver?
@tropicalstorm27037 жыл бұрын
the manual is printed too small and light to read and I can not see what you are doing here. Is there a step by step guide?
@livpolin73558 жыл бұрын
Does the YNE3-RX work with Strobe?
@lucianocarneiro2306 жыл бұрын
Thanks, you did save me :)
@laxmihaly30735 жыл бұрын
I have the N-E3-RT & YN600ex-RT ii but i am not getting them to link, please assist me
@karenm15475 жыл бұрын
Explain what you are doing - point to the buttons
@bedevere0077 жыл бұрын
Sweet
@moyahernandez82617 жыл бұрын
this is compatible in canon slr tnx that trnsmiter
@chrisking8168 жыл бұрын
I just don't know why my transmitter yn-r3-ex cannot connect to the canon 600ex-rt even they are on the same channel and having the same id. when I made the flash be the master, the flash light is green, but the transmitter light is red. When I made the flash slave, both of their lights were red.
@michalm85886 жыл бұрын
Hi, i have one yongnuo 565ex II, may i use with yn-e3-rt? Because i want buy 600ex RT II + yn-e3-rt May you help me? Thanks ;)
@dimitriskorentzelos37096 жыл бұрын
Does anybody knows if I can use the YNE3-RX to control and trigger the manual speedlight YN560 IV ? Are they compatible, or I have to buy something extra to control it?
@octaviodasilva97806 жыл бұрын
Thank you for the explanation. I noticed that you mention the ID Importance because of other people using similar speedlits. Can a Speedlite Transmitter YN-E3-RT trigger Yongnuo speedlite YN685 & Yongnuo flash YN560 IV ? Will be very happy if you could give me some advise.
@mcunhabr7 жыл бұрын
Is it true that the focus assist light from YN-E3-RT isn't centered and almost useless to APS-C cameras? Also it doesn't get well fixed (and centered), a little lose at the hot shoe?
@angelisone7 жыл бұрын
Some would be off a little bit. Would you rather pay Canon ST-E-RT for $300.00 and have no ATG AF beam?
@steveknight13147 жыл бұрын
I have just received the yongnuo yn-e3-rt transmitter and 2 yn600ex-rt ll. i cant get the yn-e3-rt transmitter to trigger the yn600ex-rt ll when the trigger is fitted to the hot shoe of my Olympus OMD 5mkll. The trigger has the latest firmware and according to yongnuo,s site the latest firmware allows it to be used on other non canon cameras. I can get the flash to fire when I press the test button on the transmitter and the link lights are both green, but when I press the shutter button an camera the flash dose not fire. Hope you can help
@angelisone7 жыл бұрын
Set both to "M" not "TTL".
@steveknight13147 жыл бұрын
I have set them to m but cant get Olympus OMD 5mkII with the YN-E3-RT on the camera to trigger the flash.
@richwilts9298 жыл бұрын
hi i cant seem to get my transmitter to flash the flash from the camera and flash control is say device un recognised
@richwilts9298 жыл бұрын
+Rich Wilts i have got yn565ex11 flash with a yn-e3rx reciever and yn-e3-rt transmitter on a canon 7d mark 2
@PatrasDrummer8 жыл бұрын
What do you think is better to use this transmitter or the Yongnuo YN622C-TX system ?
@haxaweddings8 жыл бұрын
+Metal FilL I like this one. You can find it here www.banggood.com/YONGNUO-YN600EX-RT-2_4G-Flash-Speedlite-For-Canon-AS-Canon-600EX-RT-p-972987.html?p=KX28152008068201507H
@anthonyaustincaw88277 жыл бұрын
whats better ? the YN685 + 622c or the YN600 + YNE3-rx ? They seem very similar
@jasper72257 жыл бұрын
Tony Caw wild like to know aswel
@angelisone7 жыл бұрын
You would want to buy a set of ATG/Yongnuo YN622C II. Then you will have a better ATG AF Assist Beam. If will turbo your AF lenses even in total darkness. Then you can park any flash on one of the YN-622C II to become ATG wireless radio ETTL II. And make all camera flash setting from the camera's flash menu. A set has two transceivers = meaning can be a Master or Slave. So if you have Canon 580EX II, 430EX II & ATG/Nissin, it becomes radio.
@skillvslucky70378 жыл бұрын
hy,, i looking for yn e3-rt trasmiter i my country but i can't find it. could you tell me, what trigger I sould to by that compatible with yongnuo 600ex. thankyou
@haxaweddings8 жыл бұрын
+om jahat I like this YN600.. You can find it here www.banggood.com/YONGNUO-YN600EX-RT-2_4G-Flash-Speedlite-For-Canon-AS-Canon-600EX-RT-p-972987.html?p=KX28152008068201507H
@enigma450443 жыл бұрын
Have these 2 same exact models and everything is synced. same channel, same ID numbers, green lights on both but can't get the modes to change or power or anything to reflect one another. Flash goes off if I take a shot. Any ideas?
@enigma450443 жыл бұрын
So I got the power of the flash output to change controlling it by the transmitter but the power slider on the flash doesn't reflect the change on the transmitter but the actual flash power still changes to whatever I change it to on the transmitter. Not able to get modes to changes and reflect each other like he does in this video though.
@andrewsteres39543 жыл бұрын
@@enigma45044 did you ever figure out what the solution was? Im having the same problem. They are linked and are firing but when i change the settings on the transmitter it wont change the settings on the flash
@jrphotography72703 жыл бұрын
Yes. It changes just not in real time. So the flash power will change by using the adjustment on the transmitter but won't reflect on the flash till its fired
@CamelXP817 жыл бұрын
Does YNE3-RX supports HSS?
@angelisone7 жыл бұрын
Yongnuo doesn't YNE3-RX.
@gokselkaya33577 жыл бұрын
Does it overheats. Can you please answer.
@samithperera997 жыл бұрын
yeah it does !
@angelisone7 жыл бұрын
Not unless you want to buy the ATG Gold MG8k Flash Kim X3. Flashes don't overheat not shutdown: 1. ATG Gold MG8k Flash Kim X3 2. Quantum QFlash (by ATG) 3. Metz 60CT-4 (by ATG) 4. ATG/Godox AD600, Profoto B1, Phottix Indra500 5. ATG Gold 200ws, 400ws, 500ws, 600ws, 1,000ws, 2,000ws Again, all Canon, Nikon, Sony, Olympus flashes overheat and shutdown. Canon 600EX II-RT and below = overheat Nikon SB-910 and below = overheat Sony HVL-F60M and below = overheat If you shoot or need HSS or need a real working pro flash, then those five listed are not cheap.
@fottomeerdanalleenfotograf65364 жыл бұрын
My YN-E3-RT Transmitter loose connection with the YN600 EX RT II Anyone can tell my why?
@danielaargandonalowe97644 жыл бұрын
happened the same to me just on a session!!!
@samithperera997 жыл бұрын
auto zoom function is not available when you shoot off camera as a radio slave.
@angelisone7 жыл бұрын
You would need to buy ATG/Nissin system if you need to do ATG wireless radio zoom in ATG ADI TTL, ETTL II, ITTL, TTL, M. And the top of the line transmitter from ATG/Nissin run: 1. ATG Gold X is over $1,500.00 2. Nissin Air10s is over $150.00
@paulbunce30738 жыл бұрын
this kit is not very good goes faulty in a few months but when you contact them they do no reply I have the YN-E3-RT and the display is green with lines down it, what a waste of money will not by there junk again.
@TalesOfWar7 жыл бұрын
Something to consider, you can get 6 of these flashes for a single Canon equivalent. It sounds like you got a bad set too, a friend of mine has had 4 of these and the trigger for well over a year now and uses them quite regularly and they've been nothing but reliable. You just seem to have gotten the shtty end of the luck stick this time which sucks.
@1underwaterant4 жыл бұрын
Bad presenter. He goes through it too fast.
@disgpd4 жыл бұрын
dumb and slow viewer ;) I've watched this video on 1.25 speed and set everything up
@Najiharbi6 жыл бұрын
does this YNE3 transmitter and receiver work with any hss flash? such as canon AND GODOX?