Using wireless microphone Behringer Public Address

[@zaralad]

Hi Neil, I have the exact same setup as you demo here except as soon as the USB receiver connects with the mike I hear the hum from the speaker. The hum stops if I grab the USB receiver with my hand and encase it with my palm. It does that with both speakers. Turning the input all the way down does not help. Any ideas?

[@Highbury5089]

I no longer have access to the device in this video. Sounds like the interference signal is coming from a third device somewhere in the room or outside the room. I think the frequency used is 600 MHz and this is used by a multitude of devices. In Australia, some years ago, we changed the frequency used by mobile microphones to avoid this problem. It is now illegal to use the old systems

[@Highbury5089]

www.behindthemixer.com/wireless-microphones-600-mhz-fcc-ban/ If you are in Canada or the USA the above link might be of use

So... are the xlr inputs disabled as soon as the wireless mics are connected ?

[@Highbury5089]

Sorry. I do not know. It is some years ago that I lost contact with this device.

[@DavidCervera702]

I am here looking for an answer to this same question. Looked through the manual and there is no mention of it.

[@Droneking68]

just bought 2 and only one works independently what's the point I want both to work I bought the dual pack

[@Highbury5089]

Does not sound like a very happy situation

[@LuisHernandez-nw8hs]

The same happens to me. Could you solve it?

[@molinasanchinelli8372]

You have to sinc both mics, pressing the second one on the two buttons at once. Let me know if you could

[@adrianasia086]

Ultralink ULM202USB has poor signal connection when it used in open area like gymnasium.. I thought it is very good because of the behringer brand.. But i am wrong it was so disappointing..

[@Highbury5089]

Sorry to hear the news. What frequency do mobile phones use in your country. In Australia the radio microphones have had their frequency changed to be different to that used by mobile phones. Prior to that people at public venues were asked to switch off their mobile phones because it interfered with the sound system.

[@JohnReeVolt]

What about battery life (in hours)? And what kind of battery?

[@Highbury5089]

Sorry I do not know. I no longer have access to this equipment.

[@612fresko]

can I use it with any speaker

[@Highbury5089]

I nolonger have access to this system or to its Manuals. I doubt that it could be used with "any speaker"

[@saritanhjsirat1195]

ViC Mc1 LeOn actually yes as long as your speaker has USB port

[@leeleekuku7668]

I have Alto TX 208 can i plug to him ?

[@bobwallacejnr6852]

always go through a mixer....bluetooth is no good