Utilizing Digital Stage Boxes for Portable Church Application (Part 1 of 2)

Drew Brashler of dBBaudio.com stops by MUSIC Group Studios to demonstrate how to setup Digital Stage Boxes for portable Church applications with the X32 Digital Console. This section covers connecting the X32 to the SD8/SD16 Digital Stage Boxes using a shielded CAT5 cable.
Subscribe to BEHRINGER - bit.ly/1vmw64Q
Like BEHRINGER on Facebook: behringer
Follow BEHRINGER on Instagram: / behringer
Follow BEHRINGER on Twitter: / behringer

[@thestadiumshoppeonrazorbac7150]

Question about the Digital Snake and the signal. Can you split the digital output signal via router or switch and send one signal to FOH and one to the monitor board side stage?

[@arunthomas189]

Can I connect an XR-16 to an SD16 via ethernet?

[@behringer]

No Arun, the XR16 is not able to be connected to your SD16 as it is designed to be a standalone mixer.

[@Johnyevil]

"This is Dan!"

[@TheVitorgoncalves]

i want to connect a X32 to SD16 with a cable Cat5 and from the SD16 to the Turbosound with a Cat5 cable is t possible.

[@behringer]

+Vitor Manuel Goncalves Yes it is!

[@behringer]

Yes this is possible. X32 users can simultaneously tap ULTANET signals directly from the X32's ULTRANET output and then also get them from the SD16 Stage box's ULTRANET output at the same time when connected via one of the two AES50 ports on your X32.