V8 Swapped Nissan D21 Truck

[@bengarcia3063]

The fact that the truck is shaped like a brick makes it all the better

[@geogmz8277]

is it just me but when they take it out to the street before the race you can hear something is 'nocking' on that LS... on idle.

[@kirby7979]

those gen4 small blocks are no joke

[@prettydecentgarage6294]

Wow that little truck is Epic!!

[@dakotabever3772]

Pretty Decent Garage when I was a kid dad had one he lifted that bitch high up painted it it was a bad bitch

[@torryminers2177]

that turbo sounds like heaven❤️❤️

[@BoostedSpeedDemon]

sounded like the ls was knocking though

[@robmill7228]

corvette driver - noooooo monica!!!!

[@hsbsbcsnsbzbs6656]

Rob Mill lmfao

[@allander2647]

Rob Mill haha

[@Dukes3677]

that truck is insane

[@InfiniteRespecto]

I have one of these with the 4 cyl. I'd love to turbo it and make at least 250whp. Stock is 135. I have 160-170 wight now

[@NipponSpeedWorks]

What did you do to make it 160-170

[@InfiniteRespecto]

@@NipponSpeedWorks i was retarded back then, still am. It did not make 160. It probably made 140 back then, 110 @the wheels

[@NipponSpeedWorks]

@@InfiniteRespecto got ya, im thinking about turbo charging mine

[@98dc2gsr575]

wow that's a dope truck and wicked set up!

[@timothykeith1367]

Has anyone swapped the LV3 4.3 V6 into a D21 ? Its all-alloy and 285 hp. A standalone wiring harness exists. The aluminum motor weighs about the same as the KA24-DE, a little heavier than the single cam KA24-E

[@swissroll71]

Blowing up with subs, sounds like that engine in the truck has some valve train noise at the end of the video.

[@Metigulous]

Swiss Roll it does, they were saying maybe a rocker? It's completely stock

[@Slowerthanu999]

some valvetrain noise from a lifter or two... and then the flex plate might be cracked too :) meh junkyard motor. ill fix it one day.

[@bayoubandits8710]

Slowerthanu999 where did you get the motor mounts and what fabrications did you have to do

[@Slowerthanu999]

Pablo we made the mounts for engine and trans ourselves. All the rear suspension is custom as well. There are no products for that set up in that car available.

[@bayoubandits8710]

Slowerthanu999 thanks If I have any more questions I hope I can contact u here

[@Nickdirt420]

Motor mounts?! I can't find anything on the.

[@jasonh8651]

Damn that thing is a beast

[@airsami28]

all the skills on fabricating turbo setup and everything else and you skimp using a ratchet strap for the battery hold down lmfao

[@darkrayne3402]

haha no joke XD

[@Slowerthanu999]

we had other shit to do damnit! lol......its still that way....now im just being lazy

[@airsami28]

Slowerthanu999 I saw another video today said it was teched for 11:50s bit accidentally went 9.9 whoops

[@jollyjoey1353]

It's a secure fastener and it's flexible, so fuck it..

[@JohnnyAnderson1]

ratchet strap battery hold downs work great

[@billbonu1639]

Sounds like you tore it up playing on the dyno.dont worry, your not the first and won't be the last.

[@OhighOSkater]

That thing is sick

[@scrappy452]

i guess on one noticed a rod knock

[@inspireonex]

DJ Khaled?- "Fuck it I'm on one."

[@kharon6784]

I got a question. I put a 97 ka24e motor in my 90 d21 . the motor is in and it wont start . I'm getting fuel spark and compression . what could be causing my truck not to run

[@Wreckedekcoupe]

Jim Morrison bad gas or dizzy timming

[@kharon6784]

well i checked the timing with a light and it was dead on . also the truck only starts on starting fluid then shortly dies .

[@overlyattachedbean1050]

could be a bad ecu. did you get it fixed?

[@phlat_dog]

getting me excited for that rx7 v8 build!

[@Get2pieced]

How'd you 5 lug swap it?

[@onlyj610]

I believe they have conversion kits, but most Nissan guys swap out the rear axle with a toyota axle preferably one that is from near the same year or near the same age as the truck you're using, you can do the front 5 lug swap by also taking Toyota hubs, modifying them and fitting them onto the front.

[@blixxy1320]

@@onlyj610 why not go ford 8.8 over the toyota?

[@onlyj610]

​@@blixxy1320 Well, some people want to run a specific rear end (Final drive ratio) to match their transmission to get the most performance they can out of non-aftermarket parts. I researched the Ford 8.8 and looking at it's compatible final drive ratios, it really depends on your setup or what you're using as a transmission, nobody in the Nissan or Toyota scene really looks at other car manufacturers transmissions because they are more than likely configured differently. as for drive shafts, final drive gears, and wheel bases/offset and also the suspension setup. People like to run ratios like 4:56(Toyota), 4:88(Toyota), 4:38(Nissan), 4:11 (Toyota and Ford) It just really matters on your setup honestly and what you're wanting to run on it.. Nobody ever rarely does any extraordinary engine swaps like this so that's why they get mainly like these gear ratios, they are perfect for truck like this and guaranteed going to make the truck faster whether its on the launch or on the top end. In my truck I run a 4:38, stock rear axle.

[@blixxy1320]

@@onlyj610 ahhhh okay that makes sense. I was just thinking about durability and longevity.

[@codygalloway9597]

thumbs up for the Mexico license plate lol

[@macro820]

What intake is that it looks sweet with the intercooler right there too

[@bitchnigga7605]

notification boiz

[@jessemercury7413]

if this isnt the most goofiest but tightest d21 got dam haha

[@Chopppaa7_]

How much I got a hardbody 93”

[@audricgomez9338]

you should post more project you do like the one i seen you doing on boostedboiz the turbo mainfolds i love watching all your guyes videos when i get off work or when am just board

[@Metigulous]

Audric Gomez I'm working on that video right now, hoping to finish up with the manifold tonight! I wanted to make it a complete video of the manifold being done 😎

[@travelinman482]

@@Metigulous Why an LS [Chevy] engine when Nissan makes three different V8s [Infinity/Titan models]? It’s sacrilegious to use another automaker’s powertrain in a Nissan. Shame, for shame. Lol. The Hardbody pickups weigh less than 3,000 lbs w/wo 4X4 drivetrain.

[@Goodtimesbadluckv2]

Awesome video dude , nice cuts

[@twoeightythreez]

why 5 lug in back? nissan uses same 6 bolt patterb as chevy

[@PeterGayOFFICIAL]

Corvette rear end probably or diff and rear end out of a camaro

[@under_groundlsx6264]

8.8 rear end

[@vincesmoove1]

Did I miss it what are the hp numbers?

[@earthtempcontrols5130]

Like the intercooler

[@ujrfkeids]

is that engine starting to knock a the end

[@v0idlike]

song link Hayden?

[@Metigulous]

just added it lol sorry i forgot :P thank you

[@v0idlike]

SuicideCRX thanks bro

[@junjun670-8]

I think ur truck needs more tractions, cuz the tire screeches on launch..its pretty scary to slam a huge engine on a hardbody😬

[@dakotah2121]

what motor/trans mounts did you use to bolt it in

[@dylanrice6707]

holy hell that engine is huge compared to that truck

[@JavierGarcia-vz6vb]

What differential.is using?

[@slingshot1304]

when im finished building my 350z im taking it to pfi looks like dude knows whats up

[@Forged93]

Thats not PFI.

[@slingshot1304]

Uno Turbo lol then what shop is it then?

[@Forged93]

No idea but i checked the video from when kyle got his hatch dynoed, looks completely different. plus its not bret lol.

[@slingshot1304]

Uno Turbo lol true I did notice that the second time I watched the video haha first glance it looks almost the same

[@Forged93]

maybe hayden can help us with an answer. lol

[@anthonyparisi8816]

Truck didn't even stage up at all like didn't get any time to build boost and still beat the vette

[@ka.powered8328]

Plz reply, is that stock rear end? and if not,what rear end is it??

[@Metigulous]

It is a built 8.8

[@ka.powered8328]

Thanks so much for responding...what vehicle did it come out from and what about the brakes?are they stock or not?

[@0778drz110]

@@ka.powered8328 Could be an 8.8 from an Exploder

[@ka.powered8328]

@@0778drz110 Ford explorer u mean? What year/model that would be?

[@WickedMoto]

bro, that truck is fucking awesome lol! sick

[@1435682]

I had no idea that V8 Engines sounded like House music.

[@ricardojaramillojr5071]

What differential are u using ?

[@BucketBoyz401]

Liam Nissan ftw

[@gasscooterdude]

How much power did it make mane?

[@eliaskarlsson9660]

Was that vette stock?

[@richardfortier2725]

that truck is nuts. it would be better with a rb26 and twin turbo with nitrous.

[@Jndbgames]

Richard Fortier it's a drag truck, theirs a reason he chose that engine: cheap, reliable, and far more capable to make a lot of power

[@KBoogiie]

Im a import guy, but cost wise this thing will blow an rb WITHOUT nitrous

[@mefydversace]

Solid work

[@miataganggarage4680]

dam thats sick just subbed to your Channel its awesome

[@jonathanpamela5064]

those meehican flags look funny asf

[@youtubeisbroken241]

😧. What an awesome swap idea. Can you tell me if this engine would fit under the hood without the high rise intake and turbo? And what, if any, clearance issues were there with oil pan, steering rack, and transmission?

[@AzBigD]

Nice!!!!

[@dangerousfreedom4965]

I love the Mexico flag over the tags LoL👍

[@bikelifeben7887]

your Rx7 needs that turbo.

[@Metigulous]

BikeLifeBen it'll get one like that just a little smaller exhaust housing

[@bikelifeben7887]

Cant wait man.. Gonna be a nice build!

[@DavidGonzales-mw8mo]

that is a turbocharged Silverado engine

[@BucksSuperStereoWorld]

That truck is fucking mean!

[@BeanSnipez]

What up Hayden

[@boostedchronic5163]

wow that's detication

[@alfredocastro4915]

Size on tires on the back

[@TheSaab04]

🤓 🇲🇽 👏

[@brianclark17]

Knock knock...

[@artistaantrax7501]

Whats his instagram page

[@luisiribe3220]

Yoyo hayden

[@alltheboost5363]

I need you to build me a manifold.

[@Metigulous]

nick simmons [e-mail] email me!

[@EdwardAlcala]

fuck i just got off work 💔

[@Metigulous]

you're late boi

[@EdwardAlcala]

SuicideCRX overtime pays to good bro😭 close to 3k already boi! better buy me a turbo 😂😂

[@suavehouse5150]

Potential 👌🏽

[@paulreyes9056]

mini truck from hell Lol

[@stephenfowler9152]

Knocking

[@toallinrock]

Alv está de huevos

[@typ8723]

suck up birds

[@jayh5896]

69th like

[@BradGryphonn]

Underpowered...

[@NezukoZ31]

was it knocking at the end?

[@alfredocastro4915]

Size on tires on the back

[@dominickuriger6680]

What transmission you running here?

[@kalebhutchins6799]

What trans are you running t56?