VALK MX6 ebike - quick configuration menu run through.

A run through some of the key settings (speed limit, throttle only operation).

[@dylanjames97]

Massive thank you this helped me a lot. 🍻

[@johnmazz1301]

Thank you so much helped me out alot

[@tonyelberg7814]

Thankyou heaps brother, I want to go with no assist, just throttle, I'll give it a crack, thanks again 🤣🤣🤣👍👍

[@jblbasstester1938]

How I turn off the cruise control

[@peterbateman8018]

I’ve got a Nishiro MXT 29, and have been messing with the settings. I chose 9 pedal assist options in the settings, and to my dismay the throttle only activates on 0 and 1. VALK and Nishiro are very similar bikes, so I’m hoping the settings for VALK will suit my MXT……. I’ve upset something in the little computer perhaps . Any help would be most appreciated. 😅

[@bopalm94]

How do you have throttle with assist on level 9? I like using the throttle to take off then use pedal assist.

[@qweasz562]

is it possible to set the walking mode for 15 - 13 km on the display s 830

[@danieltaylor8813]

my speedo only reads when moter is on . dosent work when just rolling . but works in reverse. ple help if can . thanks

[@zanezreika809]

Hey I have a question I have the valk electric bike but don't know how to use throttle. What do i press to use throttle

[@ashewalker9326]

you dont press it you have to peddle about 3 or 4 times to get it going and the throttle would be on the right side on the handle bar and you use it like a motorbike

[@zanezreika809]

@@ashewalker9326 I know where the throttle is it's On the right handle but when I use it and twist it it dosent work? Pls reply back URGENT!!!

[@stevenh7437]

@@zanezreika809 on mine, i followed the instructions above, but the throttle would only work if the assistance mode is on level 1

[@davog5492]

Was told adjusting the speed limitation setting does nothing.. Can you confirm?

[@donkeystrut]

It removed the limitation for my bike when I set it to 50 (i.e. when indicated speed was over 25kph bike would not cut motor power). My bike was a 2019 model, no idea if the current bikes behave in the same way.

[@davog5492]

@@donkeystrut cool thanks. Also, with the Changing the amount of assistance levels from 5 to 9. Does 9 give you a greater assistance than 5 did when you had it set to the default 5 levels?

[@donkeystrut]

@@davog5492 No, it just gives you more 'slices' between min and max power.

[@davidleon9206]

This helped heaps thanks.

[@paultabone2010]

How do you set your assent setting to zero, I can’t find the button to push. I did not see how you did that . Thank you for a great way to set up our bikes

[@vellyemma8356]

Hi since I hacked my speed limit my battery don’t show 100% it charged and stop in 40%

[@brianrapley567]

Number 2 is miles,or klms Number 7 should be set on 47

[@eddiedeprived38]

How do you switch between items

[@danybou4237]

Hello donkeystrut, can you translate in french ? because my english is very bad and i dont understand . I have a vae Jinghma R7, but it isto fast in thirst speed for difficult way . I would like enter in the menu of display . Thank you very much .

[@kristiewalters1296]

you may or may not have had many of these questions but what would be the furthest it could travel when going max speed in pedal assist mode

[@donkeystrut]

I'd say about 30-40km on flat ground if you put in decent pedal effort. Furthest I've ridden is about 33km on a rail trail. After that ride it was showing ~70% remaining on the indicator. If you have to go up a steep hill the indicator drops rapidly as more amps are drawn, so a 70% on the flat can drop to under 50% pretty quickly under load.

[@tegg02]

An annoying thing with this Valk is when you are in throttle only assist mode, the amount of battery motor power at max throttle is less than being in auto mode and having to pedal to activate power. So trying to just use it like a motorbike and not pedal at all is not really possible because the power is defiantly restricted in throttle only mode.. .any suggestions to overcome this.

[@donkeystrut]

Hey mate, mine actually got stolen around March this year so maybe you can ask the prick who took it :) From memory mine had the full power available on throttle. Mine was a 2019 model, not sure if they have changed it on later models?

[@aldoleyonhjelm9961]

I have a Valk mx7 every thing works perfectly except from going from psa 3to4 there is no more power input I have done 6000km can any one help Allan

[@jettmurtikos9003]

@@aldoleyonhjelm9961can I change the speed how fast the valk mx7 goes when I use throttle?

[@Djakr29]

Nice review was looking for some more instructional videos. Do you know where I can find a a manual for the bike I bought mine second hand

[@donkeystrut]

This is where I bought mine from, they have download links for the instruction manual: www.mytopia.com.au/valk-emtb-maxxis-velo-shimano-36v-250w-ebike-electric-mountain-bike-26-black-mx6

[@axtonpayton1852]

instaBlaster...

[@ka-i]

How long does the battery last?

[@donkeystrut]

Depends how much assist you dial in and how hard you bother pedalling. I easily get 30km range out of mine with the battery showing around 80% remaining. I've haven't ridden it until fully flat as yet.

[@bennyinabenz5339]

I have it lasted me 60 ks

[@shahbaz40009]

I ride this bike 30 km battery still 100 % ? Why

[@donkeystrut]

You got the magic battery, congrats! 😂

[@DOCWHOK9]

My g/fs MX9 also stays on 100% at screen display. Must be an internal wiring fault at the controller. The battery-LED display works correctly.

[@Jt-ii9hl]

How do you turn down the horn?

[@tonyelberg7814]

🤣🤣🤣 it's a gay horn isn't it, can't. Stand it , roadrunner would be pissed 🤣🤣🤣

[@Jt-ii9hl]

@@tonyelberg7814 I hate it. It's so friggin loud when u bump it by mistake. And yes ita like the road runner lol

[@tonyelberg7814]

@@Jt-ii9hl 🤣🤣🤣 my scooter was the same ,bump the horn button,scares the shit outta you if you not expect 🤣🤣.

[@DOCWHOK9]

@@Jt-ii9hl Rotate the horn mount so its harder to press, or relocate it further in.

[@scottimafuku2198]

What about p11 p12?

[@donkeystrut]

No idea about P11 but from a manual I found: P12: Assist Power Intensity Range: 0-5 which I think is how 'hard' the motor kicks in when it does kick in

[@robertradford6351]

Po2 to change between km\h mp\h

[@qweasz562]

is it possible to set the walking mode for 15 - 13 km on the display s 830

[@thomasturner2563]

How do you turn the light on

[@alittlecreepywhenyou]

Hold the up button.