FUELPAK FRIDAY | AUTO TUNE TIPS | 06.04.21

JOIN US TODAY AS WE SHARE FUELPAK FP3 AUTO-TUNE TIPS!

[@pkty757]

Thanks Vance & Hines for posting this and for taking the time in answering everyone’s questions here.

[@Greenmachine305]

Awesome. I need to wait for cooler temps before completing my sessions.

[@johnholley7749]

Thanks for the information. I have a '21 Road King classic. If I'm running stock exhaust, minus the Catalytic Converter, would I benefit any to change my O2 sensors to wide band versus the stock ones?

[@TheMissingnut]

where can I get the full manual , I tried the link you said and its not there. thanks

[@chrisl.7345]

Is it normal the yellow engine warning is on while you are in the “learning process” of Autotune,..and how long will it stay on ?

[@Meowlux]

I just got an Fp3 tuner . And been running auto tune for two days and when I take off out of first it bogs sometimes. But all the other gears run smooth. I have 45cells learned how many cells is good? 3:11

[@RougeWhiteBoy]

hey dude, can i ask a question. i have a new TBH megaphone gen 2 im trying to find a map for it but there is no tbr preloaded maps?

[@fernandoborysiuk7516]

Hello I use FP3 and I need a more extensive technical manual than the user manual please! Where i can dowload?

[@sheenamarandino4074]

I have a 2020 road king. put Tulsa heads on. is there a selection for heads on the fp 3 ?

[@joshrivers5870]

So if i dont get alot of green values , what are my options?

[@spida70]

If ran auto tune and hit finish but forgot to look at preview. Can I run it again or can i see what was applied to the map without running it again

[@rafaelpereira3028]

my doubt is i want to put short VH EXHAUST IN MY 2019 HD Sporster 1200t and dont now if only i put exahust i will have issues whit the bike and i have afraid to damage my bike

[@MichaelRossFLHTK]

Do you replace the original 12mm narrow band O2 sensors after your done?

[@Guns-N-Baggers]

When I hit apply value it will make turn the bike off and then back on and when I go back to do the second run my autotune is blank like I never did the first run

[@shawnpaul7882]

I’ve done two sessions that ive applied the values. When I do the preview only the chart for the back cylinder has values. The front is white or blank. So you know why?

[@johnkavulick7450]

Same for me too I’m still learning about auto tune every day

[@briancraig8233]

My 2016 street glide wont connect with the fp4, online gug said something is robbing my bluetooth????

[@rossgriffith3211]

I can't speak to the FuelPak Pro but with the FP3 I can tell you you're never going to achieve the all-green map that he holds up in the pamphlet- that's pie-in-the-sky- at least in the experience with my 2016 FLHP. I would say unless you're running one of the specific fuel maps for a known combination of components, you're probably better off with some type of Dyno tune. In my case, I'm running a Bassani header with crossover (to eliminate the cat), K&N air filter element in the stock air box and stock mufflers ( I don't like a loud bike). Motivation was to remove heat and fatten up the mix for a cooler running engine- any performance gains that might be achieved were secondary. Since my combination of components were not amongst their canned programs I had to pick the closest one and do an "auto-tune". It's a frustrating, time consuming endeavor that leaves some ambiguity. The program is finicky and leaves you wondering where the hell your previous session data went in the course of trying to do subsequent sessions. However, with the new header and with the small gains I've made with the FP3 the bike does run better- plus, there are other features that are worthy such as decel pop, throttle response adjustments and code reading. But if I had to do it over I would take a different route, something with more definitive and measurable results. Hope this helps. RG

[@guynapolitano9867]

I have an 2005 fat boy with the 95 cu in. motor. it has no o2 sensors. with this be able to optimize the fuel ratio without the o2 sensors??

[@harleyloco1853]

No you need o2 sensors for fp3 to work.

[@PutMilesOnIt]

First off when is the FP3 going to be available for the 21 models

[@PotatoeJoe69]

Idk if it's available yet (7 months after your comment) but I can tell you Harley has made it a lot harder to tune 21+ bikes. It's not just a connector change, the software and ECM is completely different as well, and it's not very tuner friendly at the moment. It'll be reliably cracked eventually tho, if it hasn't been yet.

[@my67stangtf]

Hi, I have notice since a bought these python 3.5" scalloped pipes, k and n air filter And using the fp3 map for my setup.That I get alot of handle bar shake. Is there away you can increase the air and fuel mixture ratio? can you help. Thank you. Tony

[@my67stangtf]

Also my motorcycle is a 2015 Harley-Davidson street glide 103

[@allan9584able]

where can i get copy of the instruction sheet your holding up ?

[@larryallen4227]

Could you send me one of those manuals please. Don't have a computer.

[@kevincrookshanks2896]

Can I use my fuel pak after installing zippers 468 cam?

[@PotatoeJoe69]

Yes. But there's a couple different scenarios here; when you choose a tune for your bike, you select from different options of what modifications are done to your bike. If that specific can isn't one of the options, you can contact Vance & Hines, and they will create a tune for you given your specifications.

[@calimilk1113]

Why is an auto tune needed? After a map is downloaded to your bike? Instructions say auto tune isnt needed after a map is completed?

[@martyncockerill8724]

How many miles will it take to get a good map from autotune

[@heybruh3274]

Do it until you get to the fuller data points as he clearly shows in this video. Miles will vary because it's not about miles but performance values

[@sheenamarandino4074]

Tulsa

[@bigboarmcs]

Talk more slowly please.

[@Si-Toecutter]

In practice the FP4 is awful

[@blazintrails3023]

The fp3 is garbage and customer service is non-existent. Don't waste your time and money

[@omegaseamaster1550]

please expand your professional opinion Sir.

[@blazintrails3023]

@@omegaseamaster1550 I already had an exhaust on my bike and ended up getting an S&S air cleaner. My bike still ran good it just had a pop from running leaner with the S&S. I paid $500 for the fp3 and hooked it up, tried several different maps until I found the "better" out of them but they all made the bike stall, buck, shake and pop. I rode it back and forth from work for a couple days to get some data on it and might I add almost wrecked my bike when it stalled in the middle of a turn locking up the rear tire but luckily I saved it. I tried running the autotune which never once worked it always only showed white blocks. I even turned down the engine temp settings so it would come on sooner and nothing worked and the bike was running horribly. I spent two weeks trying to get ahold of customer service via email and phone with no luck. I heard through some buddy's that when you have issues they allegedly take your data and info and send you a working map to your bikes setup if it hasn't worked.Three weeks later they finally responded by email only to say "they will get back to me". Two more weeks went by with no response. I tried calling never getting anyone to answer. I emailed back thinking obviously I had been forgotten about, only to wait another two weeks to get an email response saying that because I sent another email that got me moved to the "most recent" which put me at the bottom and would have to wait for a response. By that point I was done and responded saying to forget it, it's a non working product and terrible customer service. I downloaded the original map which instantly made the bike run significantly better and all the problems go away minus the little pop on decel. So there's my professional opinion for you smartass. It's a garbage product with garbage customer service and a big waste of money and time and almost destroyed my bike in multiple ways. I have done nothing but let everyone know how terrible this product and company is ever since😁

[@omegaseamaster1550]

@@blazintrails3023 tisk tisk