MN99SA available here: www.banggood.com/custlink/Kmvh9mLe41 Use This Coupon Code at Checkout For an Additional 10% Discount BGAff10off
@camrowdrone64973 жыл бұрын
I was watching your light fix when I recognized my videos , Thank you so much for the shout out Bro 👊🏻👍🏻👍🏻👍🏻
@Van_City3 жыл бұрын
I knew you’d see that. 😁
@PERTHWESTOZRC3 жыл бұрын
Good stuff Dan, I had to do this to my MND90 when I done my custom light kit mod last year, I made my own wiring loom and plugged into the led light port that was empty on the stock mn board so I had solid running headlights
@Van_City3 жыл бұрын
Thanks Dave, I do remember you were able to utilize another plug on the board for yours 👍 Thanks for stopping by buddy 👍💯🍻
@maxbuckley97622 жыл бұрын
Thank you very much .. this will be my first little mod
@Van_City2 жыл бұрын
Awesome. It’s definitely a mod worth doing 👍
@almar37973 жыл бұрын
Shame they changed the board is now red and looks nothing like the green one. Was hoping this would work on mine.
@Van_City3 жыл бұрын
Really this one is only a few months old. I’m sure you can still figure it out if you trace the same connections I made on this one.
@guyelsenburg91962 жыл бұрын
Damn wish I had a soldering iron now
@Van_City2 жыл бұрын
You can get a cheap iron and it will do the job
@edwinnegron77613 жыл бұрын
seems easy enough, thanks for the tip
@Van_City3 жыл бұрын
Not too difficult at all. Thanks for stopping by Edwin have a great rest of your week. 👍💯
@CMBProjects3 жыл бұрын
Nice! You would like to see my homemade 1/5 49cc RC cars!
@Van_City3 жыл бұрын
Is it a Rovan Baja Max?
@CMBProjects3 жыл бұрын
@@Van_City it isn't any commercial car, completely made from scratch!
@Hjerte_Verke2 жыл бұрын
Did you modify the rear lights? My 99S does not have brake lights where yours are, they are red LEDs and are illuminated when in reverse only. It’s a ridiculous mixup and may have been a factory mistake. On the actual Defender 90, the upper rear {red} lights are combination brake lights and tail lights. The lower lights underneath them are amber and are turn signals of course, and finally the larger lights on the bottom next to the turn signals but inboard, one clear and one red, are the reverse light and the rear fog light, respectively.
@Van_City2 жыл бұрын
No I didn’t do any mods to the brake lights. Sounds like it’s possibly a factory error
@Hjerte_Verke2 жыл бұрын
@@Van_City I looked at my circuit board and it is also different from yours *and* the one in the picture at 3:03, it's red on the top. Haha, they must change these every 6 months to a year, but it still has the 6 pin lighting plug so I will do the mod.
@Van_City2 жыл бұрын
@@Hjerte_Verke someone else who watched this video I believe had the same board as you and the same mod worked for them 👍💯💥
@WheelchairRCEscape3 жыл бұрын
Awesome MOD bro .. Good info.
@Van_City3 жыл бұрын
Thanks buddy appreciate it 👍💯💥
@414cyclerider28 ай бұрын
How would you go about adding a light bar, i thought about splicing into the headlight harness
@Van_City8 ай бұрын
You could possibly splice into the existing lights but you’d have to check the input voltage of the light bar and output voltage of the power source whether it be the headlights or directly from the board to make sure it’s not going to be too much voltage and burnout the light bar
@christian_francisco Жыл бұрын
Hi Sir 👋🏻 I just bought MN99s, and the headlights stays on without modification, but there seems to be a problem with the brake light and reverse light because they stays on too 😟 can you please help me?
@Van_City Жыл бұрын
Possibly the lights are plugged into the wrong socket
@RCDIYHG7 ай бұрын
My problem MN99 LED always blinking and the motor stops 😅 and the headlight always blinking 😮
@Van_City7 ай бұрын
Is the battery fully charged? If so then it might be bad electronics
@Hjerte_Verke2 жыл бұрын
Hey, what forum(s) did you find this info on? There's not many that are English speaking and also cover the WPL and MN trucks in detail. Thanks.
@Van_City2 жыл бұрын
Honestly I don’t remember. I know what I found was a bit different than what mine was but I was still able to make it work. I’m part of most of the MN groups on Facebook I Imagine that’s where I found it initially
@NoruegaDrone3 жыл бұрын
👍👍
@Van_City3 жыл бұрын
Thanks 👍💯💥
@geraldpenaredondo97833 жыл бұрын
Sir wish you could help me . My mn99s unit , the lights came on when i squeeze the remote steering and let go the remote steering remote cames off
@Van_City3 жыл бұрын
Yes that is how it comes from factory. If you watch this video I show you how to correct this by soldering the 2 pins together which will keep your headlights
@geraldpenaredondo97833 жыл бұрын
@@Van_City ty sir ❤️
@Van_City3 жыл бұрын
Your welcome 👍💯
@christopherantonio34533 жыл бұрын
What brushless motor can you recommend on my MN99S? 2430-8200KV or 2435-6100KV????? I want to make it faster. 😂
@Van_City3 жыл бұрын
I wouldn’t recommend s brushless it would be too fast. Single speed 370 brushed would be as big as I would go
@nftiendaonline97323 жыл бұрын
Dude, that's the best solution that I've found anywhere!! Thank you so much, works perfect. Liked and subscribed to your channel. Check out my MN99 videos and channel when you get a chance and subscribe
@Van_City3 жыл бұрын
Thanks appreciate it, I’ll definitely be stopping by to have a look 👍💯💥
@purplelegorc21702 жыл бұрын
Thanks! This helps with night driving. Check out my MN99 at Purple Lego RC