Arcade Repair Tips - Using A Tube Rejuvenator

  Рет қаралды 18,712

Arcade Repair Tips

Arcade Repair Tips

Күн бұрын

Пікірлер: 38
@leeboy2k1
@leeboy2k1 12 жыл бұрын
Great video guys! Just a quick question, what about Phosphour degredation, how does one know when the phosphours have browned to the point of the analyzer/restorer not being applicable? I know from CRT projectors, the Green usually ages the quickest. What are the contingincies for this? are there any CRT manufacturers that remain?
@nzoomed
@nzoomed 6 жыл бұрын
Ive got an old CRT TV from the 80s which the colour seems to bleed out with the red, im expecting i need to do this on my set. My worry is that some day it will be impossible to keep these CRT's still going, will it be possible to regun old tubes again?
@badreality2
@badreality2 4 жыл бұрын
Not impossible, just expensive.
@rowdyherself85
@rowdyherself85 10 жыл бұрын
Loved the video. You guys have the best repair videos out. However, I must say the dead or alive video in the back ground at the beginning made this video even more awesome!!!
@cklinejr
@cklinejr 6 жыл бұрын
Suggestion, add the keyword 'B&K 470' to the description. I was searching for a video on that model rejouv but this one didn't show up (stumbled upon it from a CRT playlist)
@16castertroy
@16castertroy 5 жыл бұрын
Arcade Repair Tips can you give the source for the bk manual (different monitor voltages, adaptor size etc)?
@MrSilverballmania
@MrSilverballmania 8 жыл бұрын
question I have a neotech nt 2702 the pin broke off the tube but I have another tube the broken tube is a RCA A68AEG25X03 vert ohms 9.3 and a hortizonal 00.1 the monitor I want to use is a Matsuhita A68AEG27X01 vert 7.4 and hortizonal 00.8 the the neck board fits the tube any help
@adrianv8330
@adrianv8330 9 жыл бұрын
can i use this in any crt television?
@manuelvivaan3658
@manuelvivaan3658 3 жыл бұрын
I know Im kinda randomly asking but does anybody know of a good place to watch newly released series online ?
@lanehassan6017
@lanehassan6017 3 жыл бұрын
@Manuel Vivaan I watch on FlixZone. You can find it on google =)
@briarkashton3461
@briarkashton3461 3 жыл бұрын
@Lane Hassan Yea, been using flixzone for since march myself =)
@manuelvivaan3658
@manuelvivaan3658 3 жыл бұрын
@Lane Hassan Thank you, I went there and it seems like a nice service :D I appreciate it !!
@lanehassan6017
@lanehassan6017 3 жыл бұрын
@Manuel Vivaan Glad I could help :D
@MightyNostromo
@MightyNostromo 13 жыл бұрын
Excellent video. Once again, thanks this valuable information. Keep up the good work.
@joachimgelhaus
@joachimgelhaus 3 жыл бұрын
Did you have any success on a Sanwa 29e31s? Lot of People wrote rejuvenation frys their Tube.
@arcaderepairtips
@arcaderepairtips 3 жыл бұрын
Yes, you need to be careful when using a tube rejuvenator with the Sanwa 29e31s as their factory tubes are notorious for poor quality guns. Because of this, they can be damaged easily during the rejuvenation process. If you would like more details about your question, please tune into our Live Show Episode 57 on Thursday, November 4, 2021 at 5:30 PM CT. Here's a link to the episode if you want to watch it: kzbin.info/www/bejne/iae3n4Cagcd0fpY. Thank you for your question and good luck with your future repairs.
@superrobotfan1099
@superrobotfan1099 13 жыл бұрын
question : could a tube with a short be working? what it display?
@argniests5357
@argniests5357 6 жыл бұрын
can a rejuvenator make a computer CRT to be brighter overall? I recently got a 2003 samsung 1100DF that is in like new condition, but it just seems dimmer than I would like it. The colors seems fine, just not as bright as I would think it should be. I also adjusted various settings, but didnt really help much
@arcaderepairtips
@arcaderepairtips 6 жыл бұрын
Hey Scott. Thank you for your question. We just wanted to let you know that we will be covering your question on our Live Show - Episode 18 tomorrow night at 5:30 PM CST on KZbin. Here's a link to the episode if you want to watch it live: kzbin.info/www/bejne/goSynYCthsZ8l6M. It will also be available as a recording at the same link if you are not able to watch it during the live feed. Again, thank you for your question and good luck with your future repairs.
@argniests5357
@argniests5357 6 жыл бұрын
thanks look forward to it. It would be nice if the brightness in this monitor could be fixed up. Its HUGE size is great for retro PC gaming! and it has RGB connectors and VGA connectors on it.
@RejectedManiac
@RejectedManiac 12 жыл бұрын
I agree. When your colors start to darken up on your tube that is usually cathode poisoning. If your monitor R, G, B, tests good then that means there is nothing bad to burn off. So what are you burning off? The good stuff! Not to mention the older tube testers are more harsh rather than if you had a Sencore CR-70 or even better a CR-7000. With the CR-7000 it may take a couple more zaps to get good results but it's also better so you don't burn up your tube accidentally!
@nigelsears7191
@nigelsears7191 2 жыл бұрын
dust on a electron gun its sealed and in a vacuum so how does that work ? the tube goes soft cause of use and age the emitting surface deteriorates and hardens , rejuvenation is a temporary fix lasting very limited time you should make this clear it is repeatable but each time you do it you risk burning the surface compleatly away and the effect second time round will last less time
@ctozzi123
@ctozzi123 13 жыл бұрын
Thanks for this, I am going to pick one up and try this on my games
@Runslik3Wind
@Runslik3Wind 8 жыл бұрын
Great video as always
@bertinouellet
@bertinouellet 10 жыл бұрын
Beware! There are many things wrong here with the adjustments. Heater voltage, G1, G2, ... Please look at the "arcade buffett" video instead. I learned from different sources and he's off on a few things here. Good if he didnt blow anything and it worked for him. But it's not done the best way for sure. Don't get me wrong, I usually really like their videos. But this one is off by too much.
@Sunnyvale877
@Sunnyvale877 5 жыл бұрын
B. Ouellet 👋 Hi! He made the first mistake, heater voltage should set to 6.3vac.Like the book stated. Higher setting will shorten the life of the tube. I’m a tv technician. Fun to watch.
@Sunnyvale877
@Sunnyvale877 4 жыл бұрын
SinistaN Hi! I currently use a secure CR 70. Filament volt is important. Well a higher setting will weaken it life, cathode will deform the mechanical structure
@Skalb303
@Skalb303 11 жыл бұрын
I bought a mechanized attack arcade game. Working when bought it. Got it home and had to bully it in basement. It still worked for two days, but screen would flicker every so often. Display disappeared, and hasn't come back. Nothing looks broke and you can hear monitor start up with no display. all other controls work including sound and gun control. Can anyone help me-what it might be?
@IntertubeNinja
@IntertubeNinja 13 жыл бұрын
Thank you oh so much for this guys. I appreciate it
@RocketLawnchair
@RocketLawnchair 13 жыл бұрын
It's ironic you would post this video as I' at the point of moving to a tube rejuvenator. I've done a cap kit, a new flyback, and have not seen that much of an improvement. This looks like the next step to getting my monitor working. Or if one of you wants to fly out here and fix it for me. ^_^ Thanks fort the helpful advice and hopefully I can use this information!
@pinbret
@pinbret 11 жыл бұрын
in my experience the tube rejuvenator is not a good idea when the color XY tubes started going bad in the late 80's we would carefully shoot the tubes and then after a week or so they would fail :'(
@2ombieboy
@2ombieboy 12 жыл бұрын
Qualty video guys please can you do a video of the dragons age game if its working i proper love that game. well any of the ld arcades kick ass. :)
@LumberjackZE
@LumberjackZE 13 жыл бұрын
love your chanel
@thompjo76
@thompjo76 10 жыл бұрын
Have you ever seen a neck that turned blue? We can't figure out why are monitor worked and then boom...nothing.
@BlazenWinchester
@BlazenWinchester 9 жыл бұрын
James Thompson blue neck is shorted out and dangerous from excess radiation. Dispose of properly.
@VendingJunkie
@VendingJunkie 9 жыл бұрын
cool
@superrobotfan1099
@superrobotfan1099 13 жыл бұрын
more video nice
Arcade Repair Tips - Drilling Holes In Plexiglass
8:01
Arcade Repair Tips
Рет қаралды 199 М.
Arcade Repair Tips - More Troubleshooting Monitors With Michael (Part Two)
8:41
Ful Video ☝🏻☝🏻☝🏻
1:01
Arkeolog
Рет қаралды 14 МЛН
Vampire SUCKS Human Energy 🧛🏻‍♂️🪫 (ft. @StevenHe )
0:34
Alan Chikin Chow
Рет қаралды 138 МЛН
Arcade Repair Tips - Troubleshooting Games That Are Playing Blind
12:45
Arcade Repair Tips
Рет қаралды 46 М.
Arcade Repair Tips - Adjusting An Arcade Monitor
9:00
Arcade Repair Tips
Рет қаралды 95 М.
Arcade Repair Tips - Checking A Monitor Tube
7:53
Arcade Repair Tips
Рет қаралды 23 М.
Arcade Repair Tips - Inspecting An Arcade Board
17:13
Arcade Repair Tips
Рет қаралды 51 М.
Arcade Repair Tips - Laminating An Arcade Cabinet
9:47
Arcade Repair Tips
Рет қаралды 18 М.
Arcade Game Repair 101 - Basic Monitor Setup
28:03
OneCircuit
Рет қаралды 32 М.
Arcade Repair Tips - Getting Familiar With The JAMMA Standard
9:06
Arcade Repair Tips
Рет қаралды 17 М.
Arcade Repair Tips - Arcade Games And Electricity Costs
3:57
Arcade Repair Tips
Рет қаралды 7 М.
Simple Monitor Fixes For Your Arcade Cabinet
6:26
Moomert1
Рет қаралды 127 М.