Vauxhall Vivaro Front Brake Pads Replacement

  Рет қаралды 5,793

retrorestore

retrorestore

Күн бұрын

Пікірлер: 27
@RogeyRD250DX
@RogeyRD250DX 2 күн бұрын
Hooraah! At last someone who agrees that all that buttering up with copper grease on the brake pads is not necessary and indeed not advised.
@Richard-gk3kq
@Richard-gk3kq 2 күн бұрын
You only just caught those brake pads in time before they started to scour the discs. Great informative video which will hopefully help a few people.
@MrBlu334
@MrBlu334 2 күн бұрын
Never done anything with a car before mate as I dont drive 😂 but watching your vids it would certainly help if I needed, informative and brilliantly explained. Love you doing these videos, from lawnmowers to the cars. Anyways thanks once again and take care 👍
@RogeyRD250DX
@RogeyRD250DX 2 күн бұрын
Despite yourself not driving ,it's still interesting stuff for the mechanically minded isn't it?
@retrorestore
@retrorestore 2 күн бұрын
Thanks 👍
@chasmcl42
@chasmcl42 2 күн бұрын
Gary squeezed the last pennies out of those pads, i think the wind in ones are only one the rear to opperate the handbrake🤔 great video guys.
@mohabatkhanmalak1161
@mohabatkhanmalak1161 11 сағат бұрын
Nice one, feels like tech school with very usefull tips. Those calipers look like Mazda MPV ones, must be standard equipment in many vehicles.🐞
@EmilyCrayons
@EmilyCrayons Күн бұрын
Lovely father and son team work , is there a way to tell the difference between a inner track rod to outer as I’ve seen videos of mistaking where the travel is and replacing the wrong part. I’m sure you know more than me about this Martin you are a very knowledgeable person. Love all your videos not 1 bad word to say about any of you 💜🥳
@Honky_Konky_Phooey
@Honky_Konky_Phooey 2 күн бұрын
Back in the day on the older Vauxhalls it was a known problem that if you didn’t release the cap there was a high probability that you would flip the cylinder rubbers. Isn’t it funny that through all the years copper slip has been used on pads yet new cars are fitted dry. Another informative video for those not in the know. Well done lads 👍
@RogeyRD250DX
@RogeyRD250DX 2 күн бұрын
Hello Honky Are you talking about the old drum brakes regards the flipping of rubbers?
@daveawhittle
@daveawhittle 2 күн бұрын
Agreed Mk2/Mk3 Astras/Cav Nova etc were terrible for flipping master cylinder seals
@Honky_Konky_Phooey
@Honky_Konky_Phooey 2 күн бұрын
@ unless you have not seen it or made the terrible balls up and done it you wouldn’t know tho would you but like you say it was a very real thing 👍
@martincraig-je4vo
@martincraig-je4vo 2 күн бұрын
The discs need changed too look at the lip top and bottom on the disc means your pads will have uneven ware plus the disc should not be that shiny
@lnwolf41
@lnwolf41 2 күн бұрын
I changed my pads once.........ONCE!!! 😂😂 it was a pain. I tried it a second time on my next car, 8 years ago, in September 98°f 90% humidity. Bolts would not move. After 30 minutes, I said F it. 2 days later pulled into a shop, 45 minutes later it was done.
@RogeyRD250DX
@RogeyRD250DX 2 күн бұрын
On a motorbike the volume of brake fliud in the reservoir is directly relevant to the volume of consumable material on the brake pads. So when worn pads are replaced, the level should always return to the full mark. Provided, of course, that it was on the full mark beforehand. And as Martin says,as long as no one's come along and thought it's low and requires a top up. I'm not sure if that's true on cars as one fluid reservoir normally feed all 4 brakes ,which would total quite a lot of pad material.
@stucook9587
@stucook9587 2 күн бұрын
Any chance of you popping round and doing my Vectra ? 😂
@stucook9587
@stucook9587 2 күн бұрын
To be honest I followed your Vectra DIY videos from years ago and they were spot on ! You've taught me loads ! Cheers and best wishes to you all ❤
@steveosshenanigans
@steveosshenanigans Күн бұрын
What are the holes in the side cover on the Trotter Van at 0.53 seconds ?
@jmptaz
@jmptaz 2 күн бұрын
Why does it look like the bottom bolt on the main bracket on the drivers side look like it is loose
@Mr_Judge_Benny_Hinn
@Mr_Judge_Benny_Hinn 2 күн бұрын
the braking system is designed to work both ways with the cap on...Your Apprentice is learning @ Gary...
@davidtsekiri-pp7yz
@davidtsekiri-pp7yz 2 күн бұрын
Thank you for another video love it😊
@anfieldroadlayoutintheloft5204
@anfieldroadlayoutintheloft5204 2 күн бұрын
great work keep up the great vid thanks lee
@karentoynton8948
@karentoynton8948 2 күн бұрын
Thanks
@steveosshenanigans
@steveosshenanigans Күн бұрын
Those discs need changing to, theres a ruddy great lip around the edges of them
@takis12345
@takis12345 2 күн бұрын
👍👍👍👍👍👍👍👍👍👍👍👍
@RogeyRD250DX
@RogeyRD250DX Күн бұрын
@@takis12345 is that 6 people with two left hands?
@henriettavickers4915
@henriettavickers4915 2 күн бұрын
🦋🦋🌼🌼🌸🌸🦋🦋❤️🇺🇸
We Diagnose A Rear Wheel Speed Sensor ABS Fault - Vauxhall Mokka
23:42
Hayter 41 Poor Running? Fix it in MINUTES!
16:48
retrorestore
Рет қаралды 6 М.
PIZZA or CHICKEN // Left or Right Challenge
00:18
Hungry FAM
Рет қаралды 16 МЛН
The Singing Challenge #joker #Harriet Quinn
00:35
佐助与鸣人
Рет қаралды 36 МЛН
У вас там какие таланты ?😂
00:19
Карина Хафизова
Рет қаралды 27 МЛН
PATCHING RENDER
10:20
On The Trowel
Рет қаралды 10 М.
FORD TRANSIT 1995 CAMPER MOT FAILURE
25:09
Neil Clark: Transit MK 3.4.5 restorations
Рет қаралды 1,2 М.
Vauxhall Mokka Play In Front Wheels Problem
16:51
retrorestore
Рет қаралды 7 М.
2.7kVA Generator - No Voltage Output | Can I Fix It?
22:45
Buy it Fix it
Рет қаралды 1,2 М.
What Rust To Look For When Buying An Old Mk 6 -7  Transit Van
9:31
retrorestore
Рет қаралды 13 М.
Prevent Wall Collapses With This Clever Solution
1:32
Skill Builder
Рет қаралды 10 М.
Flight disaster Bangkok to London Turkish Airlines
13:10
Darren John
Рет қаралды 22 М.
WAS IT WORTH REPAIRING A STOLEN FIESTA ST INVOLVED IN A POLICE PURSUIT?
22:21
salvage rebuilds uk
Рет қаралды 103 М.
PIZZA or CHICKEN // Left or Right Challenge
00:18
Hungry FAM
Рет қаралды 16 МЛН