Velflex Cold Laminator

[@brandongallacher8387]

Ok I have to thank you. I have had a cold laminator sitting in my shop for probably 2-3 years. I tried it once a long time ago and it went horribly. Tons of bubbles and wrinkles, I thought I bought a bad laminator. I got a job today and it requires the stickers to be laminated so I decided to give it one more shot before I either turn down the job or outsource it. I came across your video, your laminator looks just like mine. This simple method worked PERFECTLY! I can laminate now! I'm so excited, this is a huge win for me!

[@empire1enterprise437]

Simple and perfect illustration

[@agotisan1]

Those decals were THICC!

[@Rafaelduran1]

Can be used to install translucent vinyl over the car magnets ? To protect the design…

[@velflex.australia]

Hi Rafael, not something we've tried but I don't see why not. You would just need to adjust the distance between rollers to accomodate the extra thickness of the magnet.

[@Rafaelduran1]

@@velflex.australia thanks so much 👍🏻

[@AliMuhamad-yk4tb]

Nice..hi. .boss

[@fifiearthwanderer]

How do you determine the pressure?

[@terryw5500]

Where do u get that application tape

[@infographie]

Excellent.

[@joshcosco2]

I have the 51” version of this roller and have been trying to laminate an optically clear face mounting adhesive to a picture but I keep getting wrinkles and bubbles. The picture is 35”x47”. Any tricks or tips to not have wrinkles or bubbles?

[@velflex.australia]

Hi Josh, great question. I will consult our lamination gurus on Monday and will get back to you asap.

[@velflex.australia]

Hi Josh, our team have suggested to try adding more pressure. Also check if there is any bald spots on your roller. Typically when you don't loosen the roller when you're finished with it you can get bald spots causing it to not be an even laminate.

[@joshcosco2]

@@velflex.australia ah alright, thanks for the help!

[@alokgh8076]

Please am from Ghana, how do I get one of this laminator and the inject printer doing the printing behind, am very interested, thank you

[@lynnreese2373]

hi How to you clean the rollers

[@velflex.australia]

Hi Lynn, we would suggest using a damp cloth or alcohol wipes to clean the rollers

[@christophertilley4297]

How much force can these apply? I need something that presses with decent force

[@TrevorSchumann-p4n]

how is the process different for laminating a uv printed 3 mm pvc sign blank please

[@velflex.australia]

We've only used it for vinyl laminating so can't confirm the process for rigid signage. You would need to increase the distance between rollers to accomodate the thicker material. Other than that the process should be similar.

[@Qu33enBea]

What’s that machine printing in the back 😂

[@velflex.australia]

Hello! That would be a Mimaki CJV150 - www.velflex.com.au/Mimaki-CJV150-75

[@ta5fa]

What is the maximum distance between the two cylinders?

[@mohammedtonio991]

Hello please can you help me for buy one laminator machine like this please

[@yvetterobinson9720]

What is the Maximum Laminating Thickness?

[@AkbarPathan-sx8tb]

मशीनची किंमत किती आणि कोठे मिळेल

[@manjunathkatralli]

mam machine price

[@SAGINELA123]

Price medam

[@velflex.australia]

Check out our website: www.velflex.com.au/Cold-Roll-Laminator-1m-wide

[@terryw5500]

What size is this

[@melinam.3934]

what laminating sheets do you use??

[@wraprats1819]

I'm not sure if you're still active on here but what's the actual purpose of laminating cut designs? I'm trying to figure out if for my business i'll need one or not. Is it purely for transport? Is it to protect the design through the elements and if that's the case, do you/can you run this through a cutter afterwards to get a clean cut? Because i'd imagine on some detailed designs it would be too hard to get a nice cut by hand?

[@michaelabuckle3936]

These are heat transfer designs, so the application tape lamination allows the user to peel the heat transfer away from the backing to reveal the glue side of the transfer. The glue side is then placed down onto a material like the t-shirt in the heat press in the background, and the transfer is heat pressed on, and the application tape is peeled away having served its purpose.

[@terryw5500]

I dont think it is actual lamination tape. I think its the adhesive you need to put on your design in order to put on ur item and press

[@stuartcotterill9475]

Whatever about the Laminator but how gorgeous is she 😝

[@scottfranco1962]

Low volume.