Very Beginner Dremel Wood Carving. Tips & bits & burr's.

I show and explain what bits/burr's I use in my Dremel 4000 flexshaft in this very beginner Dremel wood carving piece. Basswood.
Kutzall
carving burs I use link,
👇
Use code: CFUSION to save 5% on burs and disks
kutzall.com/?aff=24
STARBOND GLUE 👇🏻
Use code : Cfusion to save 10%
www.starbond.com/?rfsn=475825...
Pete blair mandrel
Email pete @
[e-mail]
Manpa tools👇🏻
www.manpatools.com
All the carving tools i use are in this amazon shop listed below👇
www.amazon.com/shop/carvingfu...
If u wanted to buy me a coffee here is a link to my pal pal👇
www.paypal.me/carvingfusion
etsy.me/2Usrss6
/ carving_fusion
#Dremel #Dremelcarving #Dremelflexshaft #Powercarving #Woodcarvingvideo #Beginnerwoodcarving
#Video #Howtocarvewood
#Dremel4000 #Carvingbits #Carvingburr's #kutzall #Howtocarve

[@davidhill1220]

I love the way you include every detail Really appreciate that 👍 Patricia

[@CarvingFusion]

:) ty

[@stanpeters8893]

When I was younger about 50 years ago (75+ now), I went to Nelson's Hardware, bought a few nails, shaped them as I needed them each, bent some, filed them all until very sharp, made a charcoal fire, hardened them (2 1/2 inches long), then started to carve a cube that was 1 cube inch all around!!! I put three tiny bars on the four sides, started to carve very carefully and steadily a tiny ball inside of those tiny bars, and hd left a tiny sliver under the ball, then cut thin strips of various sand papers, about 1/8 of an inch, start to sand ball into shape, while watching two sides of bars at all times, extremely carefully!!!, When done with that tiny ball, I carefully cut the sliver of wood that was holding the ball, then sanded those super-tiny bars, all of them, then varnished it twice. When it was finally dried, I put a chain through the top where I put a very small notch then made a hole in it for that necklace's chain! Before I showed it to people in Whitehorse, you should have seen and heard them, even tho' I told everyone that I carved it as one piece of wood and never used any glue! Such expletives as they all turned it over and over, some swearing they'll find the glued parts, even tho' they heard me say 'there was never any glue or anything used from start to finish !!! By the way, last day of Sourdough Rendezvous on February 28th, 1973, I finish carving THE VERY FIRST TOTEM POLE EVER SINCE TIME BEGAN IN YUKON TERRITORY, STILL STANDS AT ROTARY PEACE PARK IN WHITEHORSE, YUKONB!!! Hope all enjoyed part of my history, Perfect Peace to all!!! Stan.

[@CarvingFusion]

Thats cool thanks for sharring i was born in 73

[@travisbrim4038]

Wish i knew you personally ive been whittling/carving for ab 25+ yrs (mostly canes. (Which i usually give them away when i see someone in need) MOST of them i give to alot of veterans with a huge THANK YOU. For your service.,clubs, bamboo crossbows wooden knives and alot of "ninja weapons" per says my 5yr old boy) however the one thing i JUST NOW (like a month ago) started doing was actually DRAW the picture on the wood ( i know sounds stupid but i never did that before watching YOUR vids and taking YOUR advice) so for what its worth Sir. THANK YOU........ Reasoni would like to know you outside of the computer is honestly to pick your brain and get some HONEST opinion and feedback from you but reason main reason..... Is well maybe some dang DRAWING LESSONS...... My hand writing looks like im tryn to conjur up spells for the dang devil so my "drawing" ( if i could call it that) well you could imagine....lol

[@karenanderson7727]

Cute little project 🧡

[@jackhaynes7985]

Glad to see this I teach some times and have a hard time thinking of things new carvers can do

[@lizakin1274]

Fun little carving. It turned out really nice Jordy. Great video.

[@johnbroadbent1609]

You didn't break it...looking forward to the new year caring ..Thanks Jordy

[@evilevilrick]

Neat little project. Lots of ideas will come from this one. Hi Jordy.

[@scottmclean4237]

Wow I really like love these , simple But amazing at the same time , think I’m making some for my family as Christmas cards Thanks for the idea

[@neilfreeman4443]

morning nice quik peice to kick off the new year turned out great thks Jordy

[@daykangemcutting8679]

wow what a handy bit

[@stevehall3609]

That would be a good Christmas tree decoration. Thanks for the idea 👍

[@jeremynoakes]

Thanks I followed along and it came out pretty good . Now just need to paint and wood burn today and I am finished . Thank again Cheers from Ontario

[@CarvingFusion]

Awesome thabk you too

[@DMPatrick1978]

Got my first bit set on the way from Kutzall! Thanks for the informative videos, and the code!

[@CarvingFusion]

Fantastic! Ty

[@ericleong1453]

Good Info Jordy ! I'm learning something from you ...Thanks for the video

[@elainebendall1198]

Awesome xx

[@iancocksedge3938]

hi jordy. great little project, looks awesome. stay safe.

[@timothyreed200]

nice little project so many ideas from this thanks again for all your hard work love the videos keep them coming

[@CarvingFusion]

Thanks tim

[@ericmccarrick9836]

Good morning Jordy! Speaking of little boards, my wife bought me a Jenga game, for me to carve little gnomes. I’ve finally started on and now mostly done w my Santa orders from last year.. I can’t wait to share them with you, Wizard King! 🧙🏽‍♂️ 😉

[@rogertyler3237]

I Made A Napkin Holder Out Of An Olg Log. & It Turned Out Great.

[@cancotree203]

Happy New Year!

[@perpetualgrowtheveninsnow3389]

I was counting down the seconds till that carving was in pieces, turned a new leaf in the new year 😁, great job, looks cool.

[@22ceedee]

heyyyy now i know why the pete mandrels are pointy on the end as well as the screw . that's cool , I was wondering why they were like that, now I know ...I do love them by the way.

[@davemi3213]

Once again dig the music you chose

[@mountainviewturning5319]

Great tips 👍 happy new year

[@CarvingFusion]

Ty u too

[@DRAKED411]

Thanks.

[@mylastnerve138]

My husband is giggling. It's really cute.

[@charlesstewart9246]

Happy Hogmanay Jordy.warmed up my wee cabin and out here clearing up, found the first 'woodspirit' from last year,😉🥴you're right,keep your old work👍,let's you know if it's worth carrying on carving,or maybe some other callings etc. I'm carring on carving,thanks Jordy, you're an inspiration 🎓🗣🎓😁😁

[@CarvingFusion]

Awesome keep at it

[@diybyed6984]

Nice project , like you said just let your imagination run wild . Beautiful day on Vancouver Island , we got out for beachcombing by Oyster River... I was think you and pick-up two bag of driftwood ,didn't see any cottonwood bark.

[@spikewillow4552]

Wicked little piece bro nice little project.... An you do so well not to break it dude lol heavy hands. Hope your good bro

[@michaellafleur2077]

Look it that Jordy you didn't break it lol! nice little project quick and easy for starters or who ever do you know I don't know!!!

[@99PercentOffFreeHugs]

I love the way you know what you are doing but are occasionally fumbling and saying jesus jordy LOL Sounds like me in my studio haha Had some bad stuff happen and just getting back in the swing of things and this brings me happiness. LOL

[@CarvingFusion]

Awesome thank you souls

[@ASCarvings]

Nice work Jordy. That tray must be with at least 80 Billion

[@stephentisdell2698]

I’m a bit heavy handed like you iv broken 2 of them extreme burs Just ordered 3 more dam it.

[@lorrainestokes931]

I dont know you and iam surprised ! HA! looks great !

[@rogertyler3237]

A Red Moon I Never Heard Of A Red Moon.

[@CarvingFusion]

You have now

[@kendansby9269]

Jordy's tender, heavy hands.

[@mylastnerve138]

Good morning jordy.very nice video. It's darling 🐱

[@larryhousden1379]

The tree Moon piece that you just finished would be a good idea for the paddle on a wind chime what do you think 🤔 I enjoy your videos keep up the good work...... Thank you

[@CarvingFusion]

Yup good idea, ty

[@rogertyler3237]

I Even Made Me A Guitar Pick

[@rogertyler3237]

I Do My Woodworking With Tree Wood

[@davepillow8478]

Love the video and thank you. I was wondering, what is the maximum thickness of wood that can be used with the carving bit you used?

[@nu3salud]

It turn out pretty! I have a question. What dremel bit can I use if I want to cut thicker wood pieces but still for small projects like yours ? For example, making hearts, square and other shapes.

[@CarvingFusion]

A wall tile cutter works great

[@nu3salud]

@@CarvingFusion thanks for replying ! I’ll try it out !

[@geraldinerice5371]

Have u eaten all that chocolate chip cookie.? Loved it, I'm gonna try to burn the house, I mean sho susie woo it. Gonna take a few doors off and burn em.😂😂😂😂😂😂👏👏👏👏👏😚🇮🇪💚

[@CarvingFusion]

2 days it was gonner!!

[@CynergyDiva]

I’ve never done wood carving before, but I’d like to get started cutting shapes and words out of 1/4” birch plywood. Can I do that with the tools you used to cut this ornament? Some of it will be pretty tiny and intricate. What would be a good starter pack to get going? I have a dremel 400XPR and the flex shaft. P.S. It’s great to see a Canadian that I can buy from.

[@CarvingFusion]

Yup u sure can

[@CynergyDiva]

Thank you for replying. I was looking at your amazon store, and I’m not sure where to start. Do you have a recommendation?

[@MultiTom1956]

Nice Jordy! Is this birch plywood? Looks great 👌

[@CarvingFusion]

It very well could be yes, that or bass wood

[@MultiTom1956]

Thank you Jordy 😊

[@markduggan3451]

Just a quick question, does the $5,000,000 for the paint tray include postage?

[@CarvingFusion]

No sorry that will be extra $ :)

[@Dpol85]

Being from ca, palm trees are pretty poplar jk

[@alanterry6683]

I will always be a beginner carver.

[@CarvingFusion]

Me too al me too

[@vallabhudu285]

Small gold carving bits name please sir please🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏

[@vallabhudu285]

Names tell me hey

[@susangrooms7514]

What size work shop do you have and how do you keep everything organized? I am a 70 yr old female and have started wood carving...oh what fun. Love your videos..and I must say, my mouth is as bad as yours or worse...it is what it is....

[@nasirfreddy832]

Lovely 😍💋 💝💖❤️

[@alonzojesse9840]

Really nice 👌 😍💋 💝💖❤️

[@ardoabigamari5417]

Really nice 👌 😍💋 💝💖❤️