Performance Mods for Piaggio Beverly BV350 Scooters

Mufflers: PMAK-03 Akrapovic or M3215157 Malossi
www.scooterwest.com/akrrapovi...
www.scooterwest.com/malossi-p...
Variator Kit from Malossi: M5115308
www.scooterwest.com/malossi-v...
Clutch Spring Kit: M2915398 Complete Clutch Kit: M5215609
www.scooterwest.com/malossi-c...
Malossi TC O2 Controller: M5514746 or the Force Master 2: M5515723
www.scooterwest.com/o2-contro...
www.scooterwest.com/force-mas...
Bitubo Performance Rear Shocks: BI-BV350RR
www.scooterwest.com/rear-pair...
Malossi High Flow Air Filter: M1415662
www.scooterwest.com/malossi-h...
Malossi Kevlar Belt: M6115279www.scooterwest.com/malossi-k...

[@cerme92]

Damn I get more precise and useful info here in a video from California then from straight Italy! definitly going to do some extra steps to my BV too! Thanks!

[@warren8601]

Robot, Thanks for the BV350 performance upgrade information. Good stuff.

[@VespaMotorsport]

Thanks for watching!

[@lance8167]

And I bought a lot of my scooter upgrade parts from you guys after I wrecked it

[@BenjaminRodandwhoopi]

Going on a diet is an option for improved performance.

[@ruezi12]

I got the rear Bitubos on my BV and they are muuuuch better than the originals! Fine video! Thanks!

[@VespaMotorsport]

Awesome, thanks for the feedback!

[@sgtshak2806]

@@VespaMotorsport Was thinking about these for my '18 BV350. Was the install easy or did you have to remove all the side plastics?

[@richarddegen6184]

@@sgtshak2806 yes easy, no plastic removal

[@samihawai5844]

I loved too much ❤️❤️❤️❤️

[@taki384]

Good Video Robot thx.

[@roywalls5595]

I upgraded muffler to Yosihmura and clutch spring 1500 dr pulley sider 21x17 13 gram & new variator kit , belt triple teflon I buy from Italy Piaggio company!

[@monooo5918]

Nice video 👍👍👍

[@VespaMotorsport]

Thanks for watching!

[@kengerard1540]

Race tech gold valves for the forks.

[@frattuncbas]

And maybe top speed and acceleration video with stock and with modded?

[@therdhood]

One will notice lack of EVAP in that silver BV. Did you remove it? Do you recommend removing it?

[@arist7529]

Can you please make a similar video for the new 2021 400 HPE.

[@climent1988]

Hello, I have been following your ideas for a long time and I have finally decided to buy a Beverly 350 E4. But I'm worried about those 3 less hp and torque, is the e4 worth it? or better buy e3. I'm sure you've tried both.

[@lance8167]

Excellent video. I have a 500 MP3 Piaggio. why can't you just get socks that are the right size why do you have to have a certain 1. is there a I mean there's tons of socks on the market. I mean why can't grab a shock that fits?

[@robbyricch3437]

Hi robot if I was to take away the rear fender is there still awake for the back plastics to fix onto as I noticed there’s a bolt going through it?

[@dhmhtrhsntekeles3670]

Hello nice video and very beautifull Beverly..may I ask a question?Which one is the best variation polini or malossi?

[@VespaMotorsport]

We tend to like the Malossi products, but both are nice high end Italian made options. Thanks!

[@balkicroatia]

Polini Hi-Speed was my choice

[@balkicroatia]

Why you and others not tested Race Tech gold valves for forks? I put them in 35mm scooter fork (SC250ie with 350ie engine swap) and fork works far better after mod.

[@allahoakbarone]

Hi guys, do you know anything about adding a after market exhaust on a Euro 4 and if it works well ?

[@jonathanpace8944]

HI Robot , i am interested in the Bitubo rear shock for my piaggio x 10 350 cc executive to change , will they fit my x 10 ?

[@jacobbarnes7987]

I have a piaggio bv 250cc and if has a blown head gasket and I have the whole replacement gasket set for it but I have been putting off rebuilding it because I can't find any videos of someone rebuild the 250 do you have any advice? I've worked on 50cc Chinese scooters before but am not familiar with these engines

[@rajam.yassin5152]

your the best, i used force master at max power, it kind of damaged my piston totaly and distroyd the head. sad 😢

[@leanda8073]

Really ? Why the force master is necessary, Just for the 0 at 100 km/h ?

[@climent1988]

Hello, I have a question. After installing the Force Master 2 control unit, is traction control lost?

[@orginman1983]

what about J Costa variator? is it better than malossi

[@kristfur]

Do you still sell the Bitubo Performance Rear Shocks: BI-BV350RR ??? I can't find it on the scooterwest website.

[@sokratisaid1033]

hello I own a bv 350 and I have two remotes , one for the alarm and one for the seat opener. Both of those are original Piaggio equipment. How can I wire both those on one remote ? Thanks in advance .

[@laurentiutanase410]

Hi ! Please help me with an advice ! I have the same Beverly 350 and i have as well spine problems. I would like to have an absorber shock like have BMW f 650 , so very confortable and soft . What donyou sey ! I have to mention that i have in nu area a lot of bad roada actuality of road . Thanks a lot !

[@ismailmemedov9047]

It is same forcemaster for bv 300 and bv 350 ? i need answer please

[@Reem-qg9iv]

Can you please explain more about the rear licenceplate holder of the blue bv350 maybe about how to remove the original stock fender ? Thanks

[@VespaMotorsport]

Pretty simple to unbolt from the rear support. The hard part is re-routing and wiring the turn signal wires into the stock tail light. This is a totally custom, one off job which is why we don't really advertise it. We always get tons of inquiries whenever we show this bike. Maybe we'll make a quick video on it. Thanks!

[@Reem-qg9iv]

Vespa Motorsport Okay i understand ! And i’m looking forward to the video! Thanks for the quick response👍🏽

[@frattuncbas]

Yess pls..

[@SnoziN]

Does the variator fix to the newest BV 350 ST euro4 (2017-2018)?

[@nickharalampopoulos]

Excellent video! I also like the Acrapovic exhausts. But I want to correct you. It is pronounced Akr-a-povits with the tone at the second a.

[@richarddegen6184]

Malossi pipe is nicer/better

[@humannature3916]

Is the malossi belt better than the oem?

[@axxdi_8901]

Which model will now fit bv350 akrapovic ? I cant find any???

[@kingsplayentertainment5596]

Are all these mods also available for the BV 125 I.E? If so, do the 350 parts fit on the 125?

[@BenjaminRodandwhoopi]

No

[@brosciencemoe4626]

Hello Robot: love your channel. I have a question. How can I lower the heat height by about an inch on my BV350. I'm basically tiptoeing. I'm 5 ft 7 inches tall.

[@VespaMotorsport]

We don't really offer any products for this (we have a lowering bracket for some Vespa models but not the BV), but an easy solution would be to take your seat to an upholstery shop and have them shave some of the foam off. We've done this many times over the years for customers.

[@brosciencemoe4626]

@@VespaMotorsport Hey, thanks for the advice. i wished i was somewhere near you to come in and do it. but i'm in NYC so i will have to look someone up over here. thanks again. love the channel.

[@taki384]

@@brosciencemoe4626 My wife has the same problem with her BV. and we are also in the NYC. area if you find a soulution please let me know thanks.

[@stormilight4574]

What is the weight limit on this scooter?

[@allahoakbarone]

Hi guys i just wanted to ask if you could have a look and maybe do a review on the ( J COSTA ) variator for the BV350

[@VespaMotorsport]

We usually just cover products that we sell in our shop. But if we can get a hold of a J Costa variator, we'd be happy to give it a try.

[@allahoakbarone]

@@VespaMotorsport thank you very much.

[@dstjepan]

Hi! Does Malossi reduce end-speed? I know it boosts acceleration... but how does it influence top-speed?

[@richarddegen6184]

same or better

[@stefanolombardo5935]

Hi, what model is the akrapovic? I cant find one for my beverly 350s 2019... Thanks

[@VespaMotorsport]

www.scooterwest.com/akrrapovic-performance-slip-on-exhaust-bv350-pmak-03.html

[@Vo-Daddy]

Do these parts apply to the newer year BV350s (2017-2019?)

[@richarddegen6184]

yes

[@gooble69]

I don't need performance mods, the scooter is awesome as is. But some visual mods would be nice. Custom mirrors, seat, remove the rear grab handle and fender, maybe some decals and get a more it more sporty looking.

[@wingedmonkeys548]

Hey friend what do we gain by changing all that

[@richarddegen6184]

low to midrange torque and big hole shot!

[@garyvandersluis2368]

Does the Malossi variation have any impact (wear) on the clutch, thanks

[@richarddegen6184]

no

[@SuperLATINMIX]

do you guys have parts for the beverly 500

[@VespaMotorsport]

We do! Check out scooterwest.com or give us a call if there's something specific you need.

[@mtzionlion]

Will the warranty be voided if I install the Malossi muffler on a new BV 350?

[@J2I3H]

Does a malossi kit raise the cruising speed rpm? I like acceleration but afterwards it should settle at the normal cruising speed rpm..

[@inkjob12]

Curious...price for the BV thats for sale?

[@VespaMotorsport]

$4295. Give us a call in you're interested. 619-280-1718

[@vinnypinto4695]

Acropovic or malossi

[@richarddegen6184]

Malossi....mounts to header pipe without those ugly springs

[@frattuncbas]

They are really very expensive in Turkey..I cant mod my bike..Think about Beverly is 20.000 € in Europe..An Akrapovic is 3000 €,our currency is like this here..😒

[@The77Game]

The Beverly 350 is NOT €20.000 in Europe. In Denmark it is expensive at €10.000 and as far as i can tell, in Turkey it costs about €8.400.

[@frattuncbas]

@@The77Game It s not i know but you must think its 20.000 💶 in Europe comparing Turkey..1 Euro is 10 Turkish Liras now.

[@The77Game]

@@frattuncbas you used the €. That means euro and not turkis lire

[@simone9945]

@@The77Game in italy I paid it 5.300

[@The77Game]

@@simone9945 Yes that would probably be the country it's cheapest in. If i could get it at that price i would have bought it.

[@tylerdurden8632]

i think the polini kit is much better

[@yerayeliasrodriguez110]

El akrapovic va mejor que el malossi

[@kusadasngezelimgorelim4657]

Why playing arraound with all this mallossi parts just take j costa variotor and you have power and fists perfeckt to stock engine.

[@richarddegen6184]

Mallosi variator, fits perfect.....$200 US