Installing a USB Charging Port on a Vespa

[@ronjaybarnett]

Hi Robot, Once again, thank you for the clear instructions. So nice to have you show how it’s done so we don’t have to figure it out ourselves. I was going to tap into the running light on the left behind the plastic cover. and simply dangle a pig tail into the glove blocks through a small hole in the black rubber cover that allows access to the running light. I like your install much better. Thank you Ron

[@GunNut37086]

They key to happiness is loving what you do. Robot is the man! I like watching how much care you put into your work and you are about the most knowledgeable person I know about Vespas. Thanks for helping us out.

[@howardwu9187]

I did it on my 2016 Vespa Sprint. No problem at all. I have connected the port to my bikecam and it is working. thanks robot

[@VespaMotorsport]

Great to hear!

[@dekker_]

Such a helpful video! Thank you so much! I'm going to try and install this on my Vespa. You make it look easy :)

[@ns4526]

thank you sir, i was looking for a tutorial where the power will switch off after removing the key. this helped out alot. Greetings from Amsterdam!

[@buzzkillg230rc]

Thanks for posting that Robot! After I purchased the euro light kit, I had mentioned to steve maybe adding or re-doing the video for the install to mention that glove box door dumb bell. It flipped on me during the re-install and i had a heck of time getting that door open without damaging it.

[@TheMaggieMia]

This is something I can get done this winter on my LXV, thanks for the video.

[@west2284]

Car shops.

[@dodgydruid]

Hey do you chaps ever come over to one of our huge scooter rallies we have here in the UK? Isle of Wight in August is absolutely massive and you would have so much fun :)

[@xodrinker]

I did this yesterday on a zip 50 and on an ET4 125 - works just fine. Good video!

[@GamingCapBros]

Mate how are those cable connectors called?

[@xodrinker]

posi tap

[@quitob1]

Another great video! I have a 2001 ET4 leader, and want to know I could just remove the left side knee panel, and tap into the headlight wires where the fuse is there. I would mount the port on that knee panel and do all this without removing the glovebox. Would this work too?

[@mrjfadams1]

I have an et4 and want to do the same do you have a list of what you used in parts please. Did you go off the indicator light ? As it looks like he goes as low in the video as the indicator ?

[@Outeater]

Is it possible to install this on a Vespa lx50 (2007) ?

[@ajosue506]

I don't even own a vespa ( thinking on getting one) but love your videos! Regards from Costa Rica

[@VespaMotorsport]

Awesome! Thank you!

[@edb2105]

Always great instructions. thank you Robot. Good job.

[@VespaMotorsport]

My pleasure!

[@damacknificent151]

Where can I get this usb charger and connector for wire tap? I have a yamaha majesty 400 I need to do this to mine

[@dannyaakjr6359]

What the name of the plug

[@jesusmejia3910]

Wow. You did that whole thing while wearing rubber gloves and not one cuss word came out your mouth. Lol Great job.

[@ingebrecht]

Wrong 2cuss words Harbor freight

[@ronjaybarnett]

Hello Robot, can you give me the part numbers for the connectors so that I can order them from you? Thank you for the clear instructions. I have a 2016 Primavera exactly like the one that you did the video on. Thank you Ron

[@junkabilly]

Can you do this to a Stella? If so where is the best place?

[@west2284]

Fun video, and instructive, but if you want to do it right, connect it via the contact, scooter to electronics, key on, then also the load ability, so safe, and is equally secured.

[@쏭-t5e]

Is it ok to connect (+) to fuse box directly?

[@josephmetzler8889]

Really helpful! You route the wires through a tube but don't actually mention what it is or where we can find it. Can you provide more info? Is there a complete parts list posted somewhere?

[@andreamarino9255]

Can you make a video for installation USB on a liberty s iget 2020 please? Im italian and i think a lot of people can appriciated that thanks

[@wuttipongwongwatthanaudom7995]

Hi how can I fin the Red tube ?

[@Postkassa69]

How do I know which cable to tap into?

[@cherrabimohammed7342]

what's the name of the small red connectors that you used ? thanks

[@eduardbou2125]

Thank you Robot, how is it in a Bv350? How to open the glove box?

[@aquaruim1]

Waw good job i like your are professional and you have amazing garage good continuation

[@Sportiummotors]

I got that charger port as standard on my primavera iget

[@akimkad]

where are you from?

[@hans-peterschmitt8847]

ariefianto95 Miquelon

[@kevindizon1167]

Goodpm sir. What kind and brand the wire

[@simkarte123]

I'm definitely going to do this on my ET2 50!

[@aquaruim1]

Very very good job you are amazing

[@d0rifto1]

do you offer USB C options

[@thewayim47]

hey robot, what is the name of the wire connector that you use to tap on the the indicator light's wire?

[@SICKAMOORE7425]

Where can I get all the pieces you got to do the job?

[@quitob1]

Another great video! I have a 2001 ET4 leader, and want to know I could just remove the left side knee panel, and tap into the headlight wires where the fuse is there. I would mount the port on that knee panel and do all this without removing the glovebox. Would this work too?

[@mrjfadams1]

Did you do it ?

[@quitob1]

@@mrjfadams1 no I chickened out.

[@mrjfadams1]

@@quitob1 I'm going to tap into the ignition... Just waiting for a diagram if all goes well will pass onto u bud I'm just stuck on what size tap ins I need

[@quitob1]

@@mrjfadams1 I wish I knew so that I could tell you, but I don't know. My plan was to order a few sizes (e.g., 10, 16, 18 gauge) from Amazon and see which size works. Thanks and good luck!

[@vespagunlugu]

Good idea, thanks for sharing.

[@yoggi_1575]

How to start my vespa sprint 150 3vie without keys

[@neerajmalik2132]

Can this be put in Vespa elegante

[@dieimkerin543]

is it possible to charge the Vespa battery with a powerbank via this USB charging port?

[@AlvaroSanchezChile]

No way

[@richoberdorfer5167]

Nope, it's a switched circuit, closed to the battery when the ignition is off.

[@dieimkerin543]

thanks for answering

[@labouch]

Great video. I'd like to know if there's room on the Primavera / Sprint to fit a Stebel Nautilus air horn in there....?

[@VespaMotorsport]

I think it would be rather difficult to install behind the glovebox.. not impossible though.

[@billrush052451]

I tried getting the Stebel Nautilus in my 2021 Sprint 150 and it was no go. Not enough room I could find. But did get a high and low tone Fiamm Freeway blaster in there And those two make a very nice loud horn.

[@janiceotazu6337]

Hi Robot! Great video. Just wondering if there was a part number for the USB port? Thanks!

[@VespaMotorsport]

Looks like it's not quite up on our site yet. Give us a call any time and we can get you one! 619-280-1718

[@Nerven86]

Would nice to see the same mod on BV350

[@keithbeal1214]

Awesome. Robot is a freakin' machine! Great instruction.

[@ejs3559]

Great video, what wires would you tap into on a 2004 gt200? Thanks

[@venividikebab341]

I did this on my Chinese scooter, however I connected the red en black wire directly on the battery. On the red wire there is a fuse built in. I could charge my phone fine for the first couple of days. Day 3 I connected my iPhone7 to it the charger cable burned out and basically blew up my charger port on the phone. I had to get a new phone after that. Now I am afraid to test it again with my new phone. Anyone have an idea what could be the issue?

[@JustRideWithTheSun]

Battery has 12V and charger only need 5V

[@aquaruim1]

Good job men continue

[@بشراكمبشراكم-خ3ي]

very good video,thanks for the good explanation robot. good continuation 😊😊

[@jckndahouseful]

Awesome video!

[@onhisscooterin8482]

nice work 👍👏👏 I like it so much 👍👍👏👏

[@vlog.fatihaydemir]

Very nice working. What is the name of the screwdriver you added cable to?

[@vlog.fatihaydemir]

electrical mechanical connectors name?

[@xodrinker]

posi tap

[@JohnC-kc5uh]

This guy is awesome

[@mrjfadams1]

Could you please give me everything u used in the video please... I want to wire up on my ET4 best video I've seen on KZbin 👍

[@kdir8727]

No fuse between it? Better have on/off switch between it. Otherwise it might overheating while it is 'live' and burn....

[@MotorheadRedo]

Those type of electric wire taps are good, but hard to find. Does Vespa Motorsport pay techs a living wage for your area? I heard California rent and gas prices are very high, and I never see any other techs working in the back ground. It looks like you supply tools for your techs, which is good, but a bad sign for tech wages since your probably supplying tools to avoid California's requirement that shops pay technicians twice minimum wage if techs are required to supply their own tools.

[@william38022]

Pretty cool 😎

[@gregorycecchin9816]

Génial !!!!!!!!!

[@ابراهيمعبودة-ع9غ]

Alvesba il rosso BX cam prezzo perché si è diffuso in Egitto

[@pimpmyvespa_ravenna_official]

Very useful video ✌🏼

[@ronjaybarnett]

Hello Robot, can you give me the part numbers for the connectors so that I can order them from you? Thank you for the clear instructions. I have a 2016 Primavera exactly like the one that you did the video on. Thank you Ron