Vessel 36pcs 1/4 inch Ratchet/Driver Set

[@abluecardigan]

I don't even use tools for a living, I just like watching the content There you go 👍

[@FunkFPV]

I appreciate it 😎👍🏻

[@BubblesTheCat1]

I was tightening an exhaust manifold bolt with one of these 1/4 inch drive sets on a motor my shop had just rebuilt when a bolt snapped off clean in the cylinder head... I nervously went to my boss to inform him, and he said, if it snapped using this, there was clearly a fault with the bolt itself. It's not your fault. Felt like the little set saved my arse that day😊

[@thwipp101]

careful, mini tool kits are like crack. i love the Harbor Freight Meme kit. my guy also knows 4" when he sees it. respect.

[@jonesbonesjon6031]

Hey man, I bought it for the meme, but damn does it come in handy a lot more than I expected. Nice to have around even just for the bits inside.

[@snoozeflu]

Which kit is that?

[@nathanplayseuphonium]

Came to this channel for the hilarious shorts ( road rager causing "idle problems"), and stayed for the tool reviews. Subscribed!

[@FunkFPV]

😎👍🏻

[@petridish3045]

Buying a new tool ALWAYS makes me feel better.

[@FunkFPV]

It’s good therapy 😁

[@justins21482]

@@petridish3045 I also have tool addiction 🤣. Stepping into home depot for me is like a woman going clothes shopping

[@ShawnWing-t1o]

I literally just ordered a low power electric screw driver from vessel that is chargable by usbc. It also has a ratchet feature so yiu can use the electic motor to drive it close then ratchet the rest. I really love this company now and cant wait to check out more

[@FunkFPV]

I might pick up that screwdriver.

[@ShawnWing-t1o]

@FunkFPV it's the one that has a ball looking end on the top of it. I do mechanic work and on interior stuff I love it

[@profosist]

​@@FunkFPV I too was like whaaaa? As a enjoyer of fine electric screwdrivers I just might need that!

[@profosist]

​@@ShawnWing-t1ohey hit us up with a model if you could! Love to give what you described a try for PC Building and electronics repair.

[@ShawnWing-t1o]

@@profosist just go to Google and look up "vessel electric screwdriver" I don't remember what model it is but its the only screw driver that will show up if you search that. It has like a ball type shape at the top of the screw driver and it should be 100 or around there.but also it would be really damn good for computers I think.

[@boosted2.4_sky]

Nice set. Vessel always makes quality tools

[@S3M3E3]

The handle on that ratchet is a big boy big big boy. Whoa

[@allanmalmberg3145]

I was immediately intrigued by the little handle,,, that is one thing i´m missing in my shop.

[@s2kinky577]

Loving all your videos man. I started my job as a forklift field tech a few months ago and it’s funny because I’ve watched your videos way before that and never would I ever expect myself to be working on them! You’ve given me lots of tips and a list of tools (wallet burning) that I should consider having in my truck!

[@FunkFPV]

Nice and good luck 👍🏻

[@brenthann2623]

that is a sweet case. i get distracted by bells and whistles but the case sold it right of the bat.

[@SWKFAMOUS]

Big homie Funk investing that YT 💲into gucci tools 🔥🔥🔥💯

[@FunkFPV]

😂😂👍🏻

[@lohikarhu734]

I've had vessel tools that are still working for me, 50+ years... their impact driver, wrenches...yep, buy them once, find someone to inherit them!

[@nickbrick21]

I just bought something like this from lowes, a craftsman v series shallow socket box and driver. Was on sale for $20 now $40. Only thing missing is that nice wood composite handle!

[@patrick7247]

I appreciate you're knowledge and wit.

[@justins21482]

I can't believe you are damn near a million subs...keep kicking ass dude.

[@FunkFPV]

It’s a little crazy for me too 🥴

[@interdiction2]

I know it's a bit late to tell you this but I have a set of the Facom R360 nano quarter drive set, and it's usp for me was that you can actually rotate the socket handle axially to rotate the bit. Really very useful if you're in a confined space and can't move the handle to and fro like normal. It's a bit spendy but is very high quality. I do have a selection of vessel drivers though and find them to be excellent quality. Take care.

[@MindUrOwnBusiness77]

I have the Facom R360 nano set, wirth every penny in my book

[@bmo14lax]

Been needing one of these too. This one looks nice

[@theundergroundlairofthesqu9261]

I like that handle size! Just because the fasteners got tiny didn't make my hands any smaller!

[@ronbelanger4113]

1/4 inch drives are good for light fastener work. 3/8 or bigger for real tight/large size.

[@duramaxguy74]

Look into Wadsworth mini ratchet set. Pretty handy little kit

[@paulputnam2305]

Nice review and usage report. Thanks. Great shirt by the way.

[@FunkFPV]

I think it was from WalMart 😜

[@sociopathmercenary]

I recently put together a tool kit for my metric motorcycles... Vessel JIS palm screwdriver Icon flex head 1/4 inch ratchet set Klein 14-in-1 screwdriver with the metric flip socket set Swapped out a lot of the quarter inch bits for the ones I actually use for my bikes. This looks like a nice set to you but not sure it would fit in my tool pouch on the bike.

[@cowfrank]

That is clearly a 7 inch extension.

[@theundergroundlairofthesqu9261]

I don't think a bigger extension really exists! 😃

[@SoleEpiphany]

Did you convince your misses of that😉

[@markfergerson2145]

You go fishing a lot, don’t you?

[@FunkFPV]

I’d call it 7” 🤷🏻‍♂️

[@saucyg6371]

She told me 7 is more than enough

[@billdodson207]

Vessel fan -- cool kit, thanks

[@bayingus8926]

I went out and bought a vessel ball grip no.220w-3 and their megadora set after i saw your vid on the wood composite ones they make, only thing that sucks is the ball grip one cause you gotta use those long screwdriver bits in them otherwise it wont fit properly

[@justinvanaulen2478]

The sockets and ratchet aren't made in the Japan, most likely Taiwan. The "wood compo" handles are made in Japan for both the driver and ratchet. Regardless, it's a top quality set and I've enjoyed mine for about a year now, it's a great kit. Nice job on the review as usual.

[@SamStolpe]

i have a WERA set kinda like this. it's so nice

[@franzkoviakalak6981]

Japanese tools are the best for the money out there.

[@randysavage8963]

There ya go 👍🏻 always great content

[@gtcam723]

“Needed” Man I’ve been looking at that. I’ve considered a basic Magliner to mod for a Milwaukee packout kit.

[@nasis18]

Nice.

[@Jtx_Tools]

Great video! You you look like Big Show with a hat on

[@rogerward5717]

i would like to see some videos of the accual work you do that seems like it would be interesting

[@madjackgamingandfitness498]

I imagine it might be difficult to do often. Some warehouses don’t approve of filming. There are manufacturer companies that will go after techs working for a dealer showing work on their product and will have the video taken down. It’s why there aren’t more videos of industrial work.

[@Gilbrox1]

Showing of with the 4 inch extension 😂

[@JimBiddle.]

Currently unavailable, did you guys buy them all, already?

[@georgeburns7251]

Not a big fan of big padded handles on ratchets, especially 1/4 “ where you are not going to use a ton of force. The socket release is a must have for me. The ones without ended up in my spare tools box. Hate trying to remove a socket when my hands are covered in oil. Nice tool review, as usual.

[@JizzMasterTheZeroth]

That's a nice decorative ratchet set. Now show us a functional one.

[@luisalvarez3031]

They make an electric version that keeps the same traditional ratchet design compared to the regular electric ratchet. You Have to order from amazon japan.

[@bangbangpewpewtada3340]

I'm more curious as to the longevity of the bits compared to Wiha or Wera. If the bits aren't any good, then it would make it an easy enough to skip set. I prefer a harder bit because I would rather have it fail entirely; than deform as those tend to get stuck in shit.

[@FunkFPV]

So far so good with these. I haven’t really ripped on them yet but I’m sure I will eventually.

[@bangbangpewpewtada3340]

@FunkFPV , looking forward to a follow- up. You can tell a lot by how well they fit, but even more telling when they don't quite fit.

[@T6Tarek]

I have the full line of wood compo from vessel I have that little kit. It's great

[@FunkFPV]

It’s a joy to use

[@T6Tarek]

@FunkFPV a couple years ago it looked like they were going to discontinue the wood compo line so I seriously bought everything that was available. I wish they had 1/2" ratchets to round everything out.

[@j5962]

Gonna need sae hex bits and sockets as well. have to deduct a few points for being incomplete.

[@FunkFPV]

I really don’t see too much SAE stuff these days. Toyotas are built in America but everything is metric.

[@RandomDude989]

MAGLINE.... I live about 30 minutes from them here in Michigan.

[@markfergerson2145]

My only concern is how that wood composite is going to cope with oils, fuels, and solvents in the long term. I’m sure they used waterproof glue to make it (unlike the chipboard that a lot of furniture is made of these days) but solvent proof?

[@FunkFPV]

I’ve been using the screwdriver set with the same grips for a while now and there hasn’t been any problems yet. They hold up to brake clean.

[@garyb.4080]

Coming from Japan, I would bet it’s better than Snap On!

[@collinsimp9526]

You see the new harbor freight icon 1000 lumen light. Seems worth the $50-60

[@FunkFPV]

I was looking at that this weekend. They didn’t have a price on it. If it’s $60 I might pick one up 👍🏻

[@highpwr]

Just a quick note on your latest 'Rate Your Rage Traffic' short you posted. No comments from you regarding the 1203 flammable liquids placard on the back of that semi tanker trailer??? 🤣😊😄 OK, I'll go back to watching THIS video now. 😁

[@FunkFPV]

Haha Some times I leave things for people watching to see 😁

[@robertdascoli949]

Would it have been that hard to put a handle on that case so you could carry it easier?

[@FunkFPV]

Probably not but it would be bigger. The size is perfect for my tool bag

[@icejackalgodofmetal14]

0:28 Hand forklift or mini forklift

[@jcoul1sc]

I bought a Wurth set similar to this, thinking german quality but small print says made by tti milwaukee in China. Very disappointed, would you swap? 😂

[@FunkFPV]

I wouldn’t pay their prices for made in China 😜

[@michaelmartin2262]

You explaining why you bought this to us sounds just like me when I am explaining why I bought this or that tool with my wife and kids. Lol

[@FunkFPV]

100% 😜👍🏻

[@littlejack59]

As far as my understanding goes vessle doesnt include JIS because its a defunct standard. Plenty of people still make JIS drivers and bits but you rarley see anything new that uses JIS screws, even in japan.

[@markknister6272]

There ya go…👍

[@Eddie_Munster]

The man knows 4 inches like the back of his hand

[@chuggyhuggy8783]

did a feller get a new camera?

[@FunkFPV]

Yes I did 😎👍🏻

[@chuggyhuggy8783]

@FunkFPV looks good feller! Love It my guy. Would love to know what you upgraded to

[@garrettdustman8505]

It's a shame they didn't make the stubby a pass thru extensions

[@MarcoH72]

A little better than 6” is plenty, at least that’s what my wife says.

[@cblack1863]

Im not sure if all those components are Japanese made. I looked at Vessel sockets before, and they were Taiwanese. The bits I believe are Japanese. Ratchet and the rest I'm not sure? I'd be curious what they are stamped. If not, it's most likely Taiwanese...Cool set though!

[@Kenny-8327]

Does the mini driver vall thing go into the butt of the ratchet?

[@samhenriques4462]

Any ideal brands for a good ratchet set I could use on a car? And a safe bet for an impact for the same purpose?

[@Pacheko36097]

For DIY it’s all about warranties and how easy it is to warranty. If you haven’t already been to hobo freighter. Pittsburgh and Quinn aren’t bad at all. You’ll go as far as you need with them. Upgrade when they break. Professional? I’d do koken.

[@georgeburns7251]

@@Pacheko36097. Agree about HF being acceptable. On the whole, doing DIY auto maintenance and repair for 60 years, I’ve never broken a socket. Maybe ruined a few screw drivers using them as pry bars or gasket scrapers. Also had one 3/8 inch ratchet fail in the anvil gear that contacts the pawl.. so warranty is actually more a factor for a pro, hence the tool truck and the high prices. Their tools don’t cost much more to make, but the warranty adds a lot of costs.

[@theundergroundlairofthesqu9261]

Here's a tip about HF hand tools and power tools: Made in India? Eh, no. Made in China: may be good Made in Taiwan? An outstanding combniation of quality and value, do not hesitate to buy.

[@FunkFPV]

DIY stuff you don’t need anything fancy. Craftsman level stuff is perfectly fine. Keep an eye on Lowe’s. I’ve seen some really good deals there this time of year.

[@Servant-of-Christ88]

Really stretching for that 6in mark 😅

[@cl1587]

😃👍

[@nb1843]

longest intro eveeerrt😂😂

[@montanawhite5699]

Only con I see is that the socket holder doesn’t have the sizes labeled.

[@Ford_Falcon]

Im aussie we use sidchrome aussie made and as old as snapon or even older but just as expensive but we support them old saying by sidchrome cant hand a man a grander spanner

[@FunkFPV]

SnapOn prices are obscene

[@nomusicrc]

6:23 I WISH 4 INCHES

[@allanmalmberg3145]

Milimeter sizes,,, where do you live if you are using those ? Or do you need both inch and milimeter tools ? I live in Sweden btw ;)

[@theundergroundlairofthesqu9261]

The US is a mixed bag. For samller things, yeah, a lot of metric is around. Our vehicles, metric. For heavy industry big stuff, lots of SAE/inch around. But he's a forklift mechanic and he works on Toyota forklifts, for example.

[@sociopathmercenary]

I ride Japanese motorcycles and everything on them is metric. Being America, Most of us need both metric and SAE if you do much wrenching.

[@FunkFPV]

I’m the US and we get to buy 2 of everything 😜 Most of the stuff I work on is metric.

[@BubblesTheCat1]

Thank goodness here in South Africa everything's metric. A half-inch doubles as a 13 and a 9/16 as a 14, but the rest of the imperial sizes are very user 'unfriendly' to me🤭

[@BubblesTheCat1]

The knockoff Chinese ones work well for a little while until the ratchet strips😠 Then you can't get only the ratchet by itself. Good luck also if the cheap set drops while open. You'll search forever to find all the pieces, as they WILL all fly out☹️

[@MArk19745-i]

Have i won

[@theundergroundlairofthesqu9261]

Laser etching wears off and you could barely read it in the first place and then you really can't read it!

[@FunkFPV]

Exactly! It goes from inconvenient to impossible.

[@NOOTSMAZDAS]

thats above average for an extension

[@FunkFPV]

That’s what I keep saying 😜

[@yogi05lc]

Very nice (borat voice)

[@TigrisAmora]

Milwaukee makes a pretty solid 1/4" set that comes in a nice case too, and Hobo Depot has it on sale right now for what its worth. Also curse you for adding something else I need to buy 😂

[@FunkFPV]

😁👍🏻

[@evanforster2665]

Wheres all the non communist sizes . I got a lil husky set like that its got both up to 13 and 1/2

[@MyToxicMasculinity]

The handle is too much. I actually use my tools for more than putting together IKEA furniture. That handle would often get in the way. It’s the same way with their screwdrivers. Massive fkn handles!! I still think Tekton are the best value tool.

[@fy74]

The handle is too big, it needs to be small enough to hurt your hand if you're trying to break something too big. Or you'll break your ratchet

[@KendlickLama]

Why do you always look like you are in pain in the thumbnail?

[@FunkFPV]

Because I hate making thumbnails 😂 I hate faking an expression but if my face isn’t in it the video gets half the views.

[@JoeyDiamond6467]

First