Veteran Abrams is Back! Lets repair it since the cutout...

[@Kekafuch]

Thanks for update on your Abrams. Looking forward for more updates. I am currently at 1300kms and .02 firmware. No issue but I am always afraid and need to think about my riding environment.

[@MisterBanaszak]

If u don’t push it to much it’s not a problem… got 400km on it again but check for me how much power u use and current in DarknessBot or the app u use… I got more then 9000w power out of the wheel… it’s so much?

[@DonovanWert]

Awesome 😎 thanks brother 🙏

[@znek4288]

Happy rides!!

[@MisterBanaszak]

Thnx m8! 🤙🏼🤘🏼

[@Mourdraug]

Nice to see you got the Abrams back. I kept riding mine without issues. LK released update few days ago, and it really did change the feel of this wheel a lot, not really sure if it's a positive or negative change personally, but heard that there is an issue that might cause wheel to throw you off when braking sharply and approaching the low speeds. (seems like LK made Abrams ride purely sensorless above ~10kph, and when braking hard it might act weird if observers value doesn't match hal position read from hal sensors when switching back to sensor driving) were you able to check it out already?

[@MisterBanaszak]

I did not try it yet because of riding the hero on grouprides off-road! We had a nice event with all kind of electric transportation… so it is not an improvement but for them it’s safer now and not thinking about driving mechanics or a test again if it works or not… will test it out this week! Thanks for info and advise man! 🤙🏼

[@Tigre01]

Happy riding and be safe!

[@MisterBanaszak]

Thanks 🤙🏼

[@BunnyslippersEUC]

Oh happy dayz.

[@MisterBanaszak]

Let’s ride together! Leaperkim family 🥳

[@feelgooddany]

Nice intro!! 🤣

[@MisterBanaszak]

Thnx!

[@jaredboulderterry3912]

Did you have to replace the axle at all?

[@MisterBanaszak]

No the axle is very strong and was not damaged in the crash!

[@jaredboulderterry3912]

@@MisterBanaszak my Abrams kind when on, the frame shakes back and forth when pressure is my applied. How ever when it's turned off it doesn't do this, have you experienced this at all?

[@MisterBanaszak]

@@jaredboulderterry3912 is the axle lose?

[@renedugas2396]

a wheel requires your full attention. there is no room for anything else between you and her. in a group you make concessions and it leads to drama. you must be entirely with her...without concession

[@ivankapipkins3643]

what happened ? how did u cut - out ?

[@MisterBanaszak]

Yeh u can see it in my video… my friend was riding and we did much more gnarly stuff that day but there it got overpowered on more speed? Really strange and I did not found any hardware issues!

[@renedugas2396]

I hope you said goodbye to your fake friends. the euc is practiced alone, you had no boredom before doing it with them

[@yeahbuddy6852]

Free of carge ? Parts free from Leaperkim ?

[@MisterBanaszak]

I wish…. Got the parts for cheap but no warranty since I use the wheel off-road etc… 😟

[@JonahHax]

@@MisterBanaszak wait what??? On a wheel that has OFFROAD stamped in the side?

[@MisterBanaszak]

Haha yeh but i sorted out with the dealer… but off-road I did with it 😂

[@JonahHax]

@@MisterBanaszak I do shortcuts through the woods onto gravel paths and shit like that, but it's not really a good offroad wheel. Do you still have your Abrams and have you had any random cutouts since the latest firmware update?

[@MisterBanaszak]

@@JonahHax no cutouts anymore and I sold my wheel to my friend… u can see him ride seated a lot and only cruise with it! KZbin channel is Bunnyslippers 😉

[@noredmx1515]

Nice. What firmware are you running?

[@MisterBanaszak]

For the moment i still got version 2.0.02 because waiting for leaperkim with latest update since they are aware of the issues…

[@noredmx1515]

@@MisterBanaszak me too, they are taking forever :(

[@MrIbif]

@@MisterBanaszak version 2.0.03 is better, but have some trouble. some riders ride at high speeds and have no problems. Perhaps Denis Hagov is right and poor-quality Hall sensors are installed in the motor or their fastening is bad or they are somehow displaced. I bought other sensors for myself, I will install them soon

[@MisterBanaszak]

@@noredmx1515 yeh I want to push it 🫣🤪

[@MisterBanaszak]

@@MrIbif ok let me know if it is better or not… but this hallsensor was tested and my did not have a bad one? Who knows… to bad because the wheel is great when there are no cutout’s involved