Vevor Small Compressor-Spraying Single Stage Paint with R500

[@thetriggerman954]

That little thing kicks ass. Quiet as a mouse too. Nice video champ 🏆 single stage looking icy 🥶

[@UndergroundPaintKing]

Appreciate you as always Triggerman 💯 this little thing comes in handy 💪🏾

[@LakesideAutobody]

Very cool video UPK - I was thinking of trying that little guy. Very informative - thanks ✌

[@UndergroundPaintKing]

You’ll like it Jerry, it’s a good little compressor to have! Thanks for checking it out my friend 💯

[@LakesideAutobody]

👍😊@@UndergroundPaintKing

[@fredericocorrea9814]

I have the SprayIt R100 mini. I like this little mini spray gun. I got it at Home Depot for thirty bucks. Have you ever used it? If so what's your opinion? I never used an lvlp gun before this one. Thanks for another great video. Between you and trigger you both have great content and s great way of teaching. Thanks again. Peace

[@UndergroundPaintKing]

@@fredericocorrea9814 I appreciate you greatly Frederico and I haven’t sprayed with the mini but I’m gonna try to get my hands on one because I really like the R500!

[@davidvazquezvazquez4465]

De Puerto Ricomegusto🎉 David wauu🎉

[@UndergroundPaintKing]

Gracias, David!

[@robertfontaine3650]

Paint went on very nice. Definitely enough pressure/cfm for a coat on a bumper. Like most cheap compressors it probably won't last forever but it does the job. When you have multiple panels or god forbid a whole car with not enough air do you do a panel at a time and then try to blend them with a very light final coat? I've got an old BMW that has a bit of blue metallic flake in the black paint (cosmosschwarz) and 25 years of door dings, dents and stone chips, i.e. hood to the metal, scratches to primer in pretty much every panel. Dents for the pdr guy to push/pull before I even think about blocking it out. Id like to spray it myself but thinking that if I do I should skip the original paint ($600/gallon) and pick a solid color (cheaper and more likely to be successful). Have you have any luck with getting these kind of paints consistent across the car. I can get a shop to spray it but I'd rather DIY if I can.

[@UndergroundPaintKing]

@@robertfontaine3650 doing a panel at a time with a small set up is a good way to do it and once you’re done you can blend it all in if needed

[@DavidWard-h7g]

I am learning so much from this channel and the Underground Builds channel. Thank you for explaining/Showing what you are doing in detail. The product reviews are on point as well. I have a question about what you cover the wheels and tires with when youre painting the vehicles. Are those just towels? looks like they work pretty slick. Thanks again for the knowledge nuggets.

[@UndergroundPaintKing]

I’m glad the channels are helping out 💯 and not many people ask about what I cover my wheels with but they are Fleece Fabric that I got from a local fabric store and have been using them for a very long time 💪🏾 I appreciate you checking out all the videos!

[@trayhine4578]

You did it again brother. That is a good compressor for them small jobs. Im going to get me one of them r500 guns. Let me ask you something, im thinking about getting a husky 27 gallon compressor. Do you think that would do a whole vehicle with the r500?

[@UndergroundPaintKing]

The R500 is a 3.5-3.9 cfm spray gun so if the 27 gallon compressor can deliver that it should work well for you!

[@poetuliradiant]

Is it 100% necessary to bake the painted car part? I want to paint my car... without dismantling it

[@UndergroundPaintKing]

No you don’t have to bake the car

[@m.akbart3840]

Hey paint king, how many quarts did you use to finish those 3 coats? I'm doing the same to my bumper soon.

[@UndergroundPaintKing]

One quart should be enough to do a bumper

[@robertfontaine3650]

What are your thoughts on tee'ing two inexpensive compressors together to get adequate CFM at the same pressure?

[@UndergroundPaintKing]

I haven’t done it myself but have been told that it works

[@teroncooley1305]

Love the video bro I'm subscribed to your other channel but everything I look it up it won't take me to it

[@UndergroundPaintKing]

Thanks Teron, I appreciate you subscribing to the channels 💯 my other channel might not be popular enough for KZbin 😂

[@jamesward5721]

My idea of what's a "Toy" & what isn't has changed a lot in the last year. The welder I use all day every day looks like a toy compared to what I used use - but it ain't. Chances are this compressor is the same deal - looks like a toy but ain't.

[@UndergroundPaintKing]

Everything is becoming compact now and you don’t have to have the big bulky units that we are use to James!

[@jameselloko6365]

Srry if my questions are stupid but I’m new at this painting auto

[@UndergroundPaintKing]

Your questions aren’t stupid and I’m glad I could help James

[@J.A.J.R.]

I just bought that same compressor and I wanted to spray paint some stuff at work and I couldn’t find any videos showing the capabilities of this unit and then I just stumble on your video and I’m impressed man. Not only did you show me the capabilities of that compressor but you did an amazing job. Thank you for this, much appreciation.

[@UndergroundPaintKing]

You’re welcome and I appreciate you stumbling across this video 🙏🏽💯 I hope it was helpful!

[@OldJoe212]

Hey Boss. When that guy gets that bumper on his car, he's gonna want you to do the rest of the car. I have the Red & Black UPK/R500 and I'm happy with it. The only problems are Operator Errors😀 Stay safe.

[@UndergroundPaintKing]

Thanks Joe, I appreciate you as always and you’re right I have been asked to do some other work already 😂

[@jameselloko6365]

Single stage paint is it true u don’t have to prime before paint

[@UndergroundPaintKing]

If you don’t have damage to repair, you don’t have to prime before paint

[@EsotericHashira]

What model air compressor is it? 4.8?

[@UndergroundPaintKing]

It’s a 6.2 or 6.3 gallon compressor

[@happyhomeservices1310]

You said the compressor was 6.5 gallons but when I used your link it is 2 gallon

[@UndergroundPaintKing]

The company had to have changed it, I’ll find another link and change it

[@UndergroundPaintKing]

I can’t find the link that I originally had so I removed the link that was in the description, sorry for the confusion

[@Danno74Z]

Hi UPK, Enjoyed the video as usual! I have an old Central Pneumatic 21 gallon compressor the exact one next to the the Vevor in your shop. The motor on the CP was tired, obnoxiously LOUD really deafening and I replaced the reed valves twice. So, I replaced the original motor with one similar in style that is used on the Vevor but the 2 HP version. The rebuilt compressor is very quiet(amazing), fills the 21 gallon tank quickly and easily handles the 3-4 CFM R500. In my case, it was a cost effective way to recycle an old compressor with those new quiet compressor motors/head units.

[@UndergroundPaintKing]

That was a great way to go about it Danno💯💪🏾

[@shidoin5398]

Do you have a link to where you bought it

[@richardblanke5521]

💰🤑🤑👍🏻

[@UndergroundPaintKing]

Appreciate you Richard 💯💪🏾

[@rob12449]

UPK, great job and demonstration, thank you for some awesome videos! Single stage looks great. You make it look easy. I don't know what the compressor costs but it seems to me it would be worth buying two and coupling them which should produce enough cfm for big jobs, also I lower the shut off pressure (some compressors can be adjusted) so it shuts off sooner since painting is low psi it's ok.

[@UndergroundPaintKing]

Thanks Rob, I appreciate you and it’s under $200 so getting 2 wouldn’t be a bad idea!

[@josephmartinez8803]

Welcome back. You've been AWOL for too long!

[@UndergroundPaintKing]

It’s good to be back Joseph 💯 I appreciate you 💪🏾

[@radkeela2]

Laying glass sir

[@UndergroundPaintKing]

Thanks Chris, I appreciate you checking out the video 💯💪🏾

[@anharahmedlife]

Did you do 5 turns out because its a small compressor? Other video ive seen 2 or 3 turns out, also can you explain to me about the fan setup for small compressor and r500. Thanks much appreciated as im getting alot of orange peel 😞 i need help on the gun set up please

[@UndergroundPaintKing]

@@anharahmedlife I set it at 5 turns out to limit how much material was coming out of the spray gun and I will link a video on how to set up your spray gun. Your peel issue could be between the temp you’re spraying at as well as the reducer/catalyst temp

[@UndergroundPaintKing]

@@anharahmedlife here is the video that might help out kzbin.info/www/bejne/eqDdgqqEgsenba8si=E8UTNRW9MM3NCgrZ

[@anharahmedlife]

@@UndergroundPaintKing much appreciated 💙

[@UndergroundPaintKing]

@@anharahmedlife glad I could assist!

[@hueinismo1]

would the vevor 100 litre 3 motor silent air compressor paint a whole car? thanks sir, like watching your videos

[@UndergroundPaintKing]

If you have the right spray gun with it you should be able to paint a whole vehicle

[@robbienyc3102]

This is inspiration !!!!!

[@UndergroundPaintKing]

Appreciate you Robbie, I hope the channel is helpful to you 💯

[@nelsonfernandez7473]

I need help ,I have a hole on my vans roof ,im going to weld a piece of metal when I cut the rust piece of ,what bondo or putty or what to use for it and for small holes here and there, thank you thank you 😅

[@UndergroundPaintKing]

After welding in your patch I would use a fiberglass filler first then you could level that out with regular body filler if needed then glazing putty for small imperfections if needed

[@nelsonfernandez7473]

@@UndergroundPaintKing thank you, I've learned alot from you and your videos, thank you for helping people out ,god bless you ,I really appreciate all you do

[@UndergroundPaintKing]

@@nelsonfernandez7473 glad I could help Nelson 💯

[@slyvendetta7192]

Im confused...some sites said this exact gun consumes 3.5 to 3.9 cfm...an others said 7-13cfm...which is the correct one??...i currently own a 175 litre,30 gallon compressor with 2hp so im considering a lvlp gun like this

[@UndergroundPaintKing]

The 3.5-3.9 should be the accurate cfm for this spray gun, there could be another model that you may be looking at Sly

[@Grant7]

That little compressor is quiet but it looks like it gets the job done... nice work my man

[@UndergroundPaintKing]

Yes sir Grant it gets the job done 💯 appreciate you checking it out bro 💪🏾

[@anthonywise1535]

Here by way of Trigger man

[@UndergroundPaintKing]

I appreciate you checking out the channel Anthony 🙏🏽💯

[@gregoryjowers3629]

Wow that little air compressor is very quiet to be oil less compressor and the r500 gun lay down the paint really nice

[@UndergroundPaintKing]

You’re right Gregory it is quiet and the r500 does a nice job! I appreciate you checking out the video 💯

[@gregoryjowers3629]

@@UndergroundPaintKing your welcome love the videos I’m still waiting on the Sagola 4600 video. Take care

[@UndergroundPaintKing]

@@gregoryjowers3629 I’ll be posting the 4600 soon!

[@yeayeasautoadventures]

looks good sir, thanks for showing us new tools and equipment

[@UndergroundPaintKing]

I appreciate you checking out the review JoCo🙏🏽💯

[@rickgibbons9645]

Ordered the same compressor 4 weeks ago. It trips out immediately if there is any pressure in the tank. Plugged directly into a wall plug with 20 amp service. it will not recharge, trips out. Vevor customer Service has been dancing about it for weeks but have done nothing. First said I couldn't use an extension cord, then claimed the voltage in my home to too low. Funny over 20 other power tools work perfectly. 3 videos to them and still no resolution. I'm learning to hate these guys. I will protest the credit card charge.

[@UndergroundPaintKing]

I had the same issue with the extension cord but as soon as I plug it into a wall plug I have no issue

[@rogeliogamboa7644]

Sir, thank you for very informative videos - what CFM is your VEVOR air compressor ?

[@UndergroundPaintKing]

You’re welcome and I can’t remember the cfm on the compressor but I’ll check it and get back to you

[@rogeliogamboa7644]

@@UndergroundPaintKing OK - thnx'

[@UndergroundPaintKing]

@@rogeliogamboa7644 it’s 3.35 cfm

[@rogeliogamboa7644]

@@UndergroundPaintKing Sir, thank you for that - wow, 3.35 CFM and it drives that R-500 with ease - amazing - thank you for all your videos - really helpful for a DYI'er- from the Philippines *

[@UndergroundPaintKing]

@@rogeliogamboa7644 you’re welcome and I’m glad I could help!

[@birdslappy]

would this setup also handle smaller clearcoat jobs like it does with laying paint, like fenders, doors, a bumper?

[@UndergroundPaintKing]

It should be able to handle small jobs for you!

[@birdslappy]

@@UndergroundPaintKing Nice! Thanks for the reply! I'm thinking of using a 20 gallon compressor with a LVLP to paint a whole car section by section to make sure I have enough pressure. From my understanding doing a whole car in sections is the way to go when using a compressor under 60 gallons to give it time to refill right?

[@UndergroundPaintKing]

@@birdslappy that’s a good process but it’s possible to paint the vehicle without having to wait for the tank to fill also

[@birdslappy]

@@UndergroundPaintKing okayyy nice! Thanks again! Love the vids

[@UndergroundPaintKing]

@@birdslappy you’re welcome and I’m glad the videos are helpful ❗️

[@marcoreis1214]

Hi, the little Vevor seems less noisy than the other one that you used on few occasions. This is actually my problem; I have been watching your videos (and some other channels), trying to find a way to "update" my car (Honda Civic 8th Gen - I like the little guy, and think it deserves a better view - those cars have a "factory" paint problem with the Clear). I am thinking of getting a 2nd hand compressor and using it to paint the car. I thought in do it with cans, but there is a problem with compatibility between types, brands, not counting that the price of all cans of Primers, Basecoat, and Clear coat, is far bigger then the one of the 2nd hand compressor e material. My ideal is sand it, fix some damages, apply Epoxi, surfacer, Basecoat, and Clearcoat - crazy right, but I will do it - Thanks for the videos

[@UndergroundPaintKing]

Sounds like you have a plan! I appreciate you checking out the videos and I hope they are helpful to you 💯

[@timmydelong2517]

I've been watching your videos a while. I painted my 78 camaro using a610 paint gun and a husky 20gal compressor. Job turned out good had some nibs had to color sand but happy with the paint job. If you want to see the pictures, get ahold of me. thanks for your videos.

[@UndergroundPaintKing]

Hey Timmy, you can send me pics at [e-mail]

[@kaseanmclean1755]

Great video. With base coat clear spraying a black pearl. What would be the minimum grit sandpaper you would use in prep before painting. 400? 600? Or 800?

[@UndergroundPaintKing]

Thanks Kasean, I appreciate you and I would go between 400-600 grit

[@gibsonexplorer8777]

When you paint the panels or whole car is it better to spray a light tack coat then two heavy medium coats like you do always learn from your videos your real not a bunch of bull keep the videos coming Paint king brother...

[@UndergroundPaintKing]

I don’t always start off with a tack coat but it is good to start with a tack coat and won’t hurt anything if you do a tack coat first, hope that helps 💯

[@los3627]

👏👏👏 You the man UPK. That little comp would be Great for painting wheels for sure. Thanx! for the vids ✌😎👍

[@UndergroundPaintKing]

Thanks Los I appreciate you 💯 and you’re right, it’s perfect for spraying wheels 💪🏾

[@theroughblueram114thgen5]

UPK ! Awesome review and tutorial on the bumper and hood ! You use the 1.3 or 1.4 tip ?

[@UndergroundPaintKing]

Thanks Blue Ram, I appreciate you and I used the 1.3 tip on this job!

[@perceycox4700]

I used my Vevor spray gun last week for the first time, it’s definitely worth the money. And TheTriggerman was right, it hoses the material on! Mannn that thing uses a lot of material but I’m still a fan. Keep up the good work UPK

[@UndergroundPaintKing]

Thanks Percey, I appreciate you and it’s good to hear you got some great results from the spray gun 💯💪🏾

[@BBlu-m9r]

Thank you for the video. Always enjoy your content. What did you use for filtration? Any water issue? I noticed you had the filter at the gun but did you have anything else to filter the air? Thank you again for your reviews!

[@UndergroundPaintKing]

I only used the filter on the spray gun and that’s it B Blu💯 I appreciate you checking out the video!

[@JClarks_Novelty_Vent_and_Chat]

It cost too much to go to mako to paint a car now. They want almost $3,000 cash for a single coating paint job. Folks on KZbin now want to know how to build their own paint booth in their small garages. With limited working space. And we don't want to blow up the neighborhood.

[@UndergroundPaintKing]

Lol I don’t think you’ll blow up the neighborhood but I’ll try to put something together for you!

[@jamesadams3476]

Nice job on the bumper upk. That little compressor is impressive for the size and it is quite. Where did you pick it from. Great video as always.

[@UndergroundPaintKing]

Thanks James, I appreciate you and the compressor was sent from the company Vevor

[@fitch_tnb]

what brand single stage do you recommend. i use it on my harley and i love it. if i get a nic or chip mid riding season i mix a small batch and use an airbrush gun and then cut buff till i want to repaint the entire set again. good work UPK

[@UndergroundPaintKing]

Thanks Fitch I appreciate you and I’ve been spraying with shopline single stage which is a ppg product line, I appreciate you checking out the video 💯

[@johannvanderschyff7735]

What pressure is required for lvlp gun for primer and for 2k or 1 stage paint please.

[@UndergroundPaintKing]

That really depends on the material you’re spraying and they’re not all the same so they all could range between 20-30 psi

[@brunoazevedo5914]

Another great work. Keep it up.

[@UndergroundPaintKing]

Thanks Bruno, I appreciate you watching the videos 🙏🏽💯

[@philipbaker2302]

Good job as always

[@UndergroundPaintKing]

Thanks Philip, I appreciate you checking it out 💯

[@user-vw8wc3vg1u]

Love the way he explained how many turns

[@UndergroundPaintKing]

I’m glad the video was helpful William 💯

[@shamrockwoods2992]

Are you gonna attempt a whole paint job with that that compressor.

[@UndergroundPaintKing]

I wasn’t planning on doing a whole car

[@dw1hkdavidtkwong]

Wow...Amazing.. that's lesson two for me..😅

[@UndergroundPaintKing]

Glad the video is helpful David!

[@M.A.C._autorestyle]

What is you take on Dupli-color and have you used?

[@UndergroundPaintKing]

I’ve used it before and I’m not a big fan of it but it will work

[@itsjusti4262]

Great vid got same setup, I'm doing whole car but it is apart, fenders, hood, doors, trunk lid, spoiler. Contemplating what's better, base and clear or single stage, painting 05 2 door civic. Aka my baby lol... not oem colors which way should I go. First timer here I'm excited lol

[@UndergroundPaintKing]

I appreciate you checking out the video and I personally like base/clear over single stage, I hope the channel continues to be helpful to you 💯

[@itsjusti4262]

@UndergroundPaintKing thanks for replying one more question please! With this setup what is a cheap but good clear, I'm painting black mix with blue mica powder then I plan on possibly tinting the clear. Thoughts on what clear to use. Thanks so much I'll share pics of car when done. This is all because of you. Keep teaching please!!!

[@UndergroundPaintKing]

@@itsjusti4262 here is a video of the budget clear that I like to use kzbin.info/www/bejne/ipK9q5aCd5iIp5Isi=24wSbZlqeoBIO5f- Hope this helps!

[@phordguy]

That setup should put $300 in your pocket all day! You nailed it UPK!

[@UndergroundPaintKing]

💯 Phordguy, if done right it’ll definitely make you money 💪🏾

[@arnoldjohnson4886]

What brand of single-stage paint do you use?

[@UndergroundPaintKing]

Shopline which is a ppg brand

[@Kadelakbk]

Faf, I had bought that vevor from Amazon but didn’t keep it returned it. Just picked up the C.P. compressor for the job that I’ll tackle soon. Thanks again for the demo 💯 can’t wait to see more videos.🎉

[@UndergroundPaintKing]

You’re welcome and I hope your project turns out great for you 💯

[@Kadelakbk]

@@UndergroundPaintKing Grazie UPK 💪

[@jameselloko6365]

The compressor did good better than big one when ur spraying do u have to stop or it keeps up

[@UndergroundPaintKing]

If you’re doing a small job the compressor should keep up if set up correctly

[@Accepting_AE86_Donations]

Underground King, my man i love your videos! I had a question about PPE.. I see alot of guys using 3M masks with the black cartridges, ive been reading alot about isocyanates in 2k clears... How can i keep myself protected while spraying? I dont spray out of a garage im in a carport sized space. Could you make a video about ventilation and proper PPE? Alot of us out here on the come up could probably use a professional opinion. Thanks 👑🙏

[@UndergroundPaintKing]

I’ll work on a video for you Ino, I think that’s good information to know

[@Accepting_AE86_Donations]

@@UndergroundPaintKing appreciate you king 👑!!

[@UndergroundPaintKing]

@@Accepting_AE86_Donations you’re welcome!

[@richardportelli1983]

wanna see you do a full car with a 12 to 15 gallon compressor.

[@UndergroundPaintKing]

If I come across a 12 to 15 gallon compressor, I’ll give it a go!

[@ganeshnarayan5505]

Wow UPK that is one beautiful job that little compressor is Awesome. Q: i'm new at car painting but can i spray clear coat on top on single stage.

[@UndergroundPaintKing]

Thanks I appreciate you checking out the video and yes you can spray clear over single stage!

[@ganeshnarayan5505]

thanks.@@UndergroundPaintKing

[@BearBudgetgarage]

Nice work as always👍Glad to see a new video up🥳🥳🥳🥳 Have great weekend UPK

[@UndergroundPaintKing]

Thanks Bear, I appreciate you 💯 Have a great weekend also 💪🏾

[@KR-81]

How does the gun compare to the other vevor sata gun

[@UndergroundPaintKing]

This spray gun doesn’t use a lot of material like the the Vevor sata gun

[@steelcitycaprice.899]

👀🤛🏾 i dont have an low volume gun in my collection not sure i need one either but i have been wanting one. Question- painting outside would you use that set up or hvlp....im about to tackle a full spray in my yard and no garage. My matco scorpion with 1.4 tip and a 27gal compressor.

[@UndergroundPaintKing]

A big setup or small setup will work for you but if you’re using a hvlp spray gun that requires more cfm than your compressor can handle you might run into the issue of your pressure dropping while you’re painting so just be mindful of that

[@steelcitycaprice.899]

@@UndergroundPaintKing I was thinking that..which is why I was also thinking of picking up a low volume gun and budget wise it wont kill the pocket. Paint King I'm probably gonna have to get one 🤣👍🏽

[@UndergroundPaintKing]

@@steelcitycaprice.899 it should work good for you 💪🏾

[@rickspaint2804]

little air compressor put in some work ✊🏽✊🏽

[@UndergroundPaintKing]

Yes sir it did 💯 I appreciate you checking it out Rick💪🏾

[@tonyadams09]

Another great video

[@UndergroundPaintKing]

Thanks Tony, I appreciate you and it’s always good hearing from you 💯

[@larrydurr6064]

Hey bro like the small compressor but how did you like the vevor lvlp spray gun I've got that very same gun but I haven't got to use it yet was you impressed with it? Your friend Larry

[@UndergroundPaintKing]

Hey Larry, I think the R500 did a good job just like the other version of it, so when you do get the chance to use it you won’t be disappointed!

[@larrydurr6064]

@@UndergroundPaintKing PS my health is doing pretty good now. Pretty much have control of the diabetes

[@UndergroundPaintKing]

@@larrydurr6064 🙏🏽 that’s great Larry!!!

[@stevenpetty1694]

UPK Sir what do you use to clean your spray gun? Lacquer thinner?

[@UndergroundPaintKing]

Yes sir Steven, you use Lacquer thinner

[@stevenpetty1694]

Thank you Sir. I'm learning a lot from your videos 👍

[@janpakx]

Excellent job ,you are the best ,I have a question why after clear coat have some dot on the panel that is dirt or lint on the panel because today I painted and get same issue after clear coat ,because you are very professional that's why I need your opinion Thank you very much

[@UndergroundPaintKing]

You got some dots but there was no dirt or lint?

[@janpakx]

no I mean why when you paint and after clear coat we have to polish ?because after you did clear coat is very good shape ,I just asking to get more information ,Thank you@@UndergroundPaintKing

[@UndergroundPaintKing]

@@janpakx you don’t have to polish if you’re satisfied with the finish

[@hankshobbies]

Another great video from …the MAN…keep up the great work

[@UndergroundPaintKing]

Thanks Hank, I appreciate that and appreciate you checking out the video 🙏🏽💯

[@kirkkephart6615]

The Master at work! Thank you for sharing your talent!

[@UndergroundPaintKing]

Thanks Kirk, I appreciate you checking out the video 💯💪🏾

[@suspensefulness]

looks good ,can u still wet sand a buff

[@UndergroundPaintKing]

Thanks I appreciate you and yes you can still wet sand and buff!

[@suspensefulness]

@@UndergroundPaintKing i have aftermarket gt500 bumper i wanna paint, i have the same 21 gallon compressor and the rs500 gun i was gonna single stage but others said base coat clear coat would be better, your thoughts would be appreciated king💯

[@UndergroundPaintKing]

@@suspensefulness I like base/clear as well but single stage will work well also

[@suspensefulness]

@@UndergroundPaintKing thank u my guy, definitely respect your knowledge and this channel is needed

[@UndergroundPaintKing]

@@suspensefulness appreciate that and I’m glad the channel is helpful 💯

[@damincobozeman8921]

You a beast king much love

[@UndergroundPaintKing]

Appreciate you Bro💯 it’s good hearing from you 💪🏾

[@DiscoGreen]

I have sprayed my c3 with a 2.5hp harbor freight read compressor.

[@DiscoGreen]

21 gallon

[@UndergroundPaintKing]

How did it turn out for you?

[@DiscoGreen]

@@UndergroundPaintKing turned out awesome.. but hit and run made me paint again... I'm prepping now.

[@UndergroundPaintKing]

@@DiscoGreen glad it turned out nice but it sucks you had to redo it

[@grahambooth-mr3eq]

Great demo 👑, don't forget to try the TE25 on your pro lite, I would lend you mine but we too far apart

[@UndergroundPaintKing]

Thanks Graham, I appreciate you and I’ll have some footage on that coming soon!

[@grahambooth-mr3eq]

@@UndergroundPaintKing oh brilliant, I want to do some more experimenting with tip sizes and pressures so look forward to your options, good man, you're a ⭐

[@UndergroundPaintKing]

@@grahambooth-mr3eq thanks Graham, I really appreciate you 🙏🏽💯

[@pstreetgarage7304]

Nice little unit, paint is going on nice !

[@UndergroundPaintKing]

Thanks PStreetGarage, it definitely works well for a small unit 💯

[@eikodunn]

👍🏾👍🏾👍🏾👍🏾👍🏾

[@UndergroundPaintKing]

Appreciate you Eiko💯

[@scottpaul4487]

You have have the best content

[@UndergroundPaintKing]

Thanks Scott, I appreciate you checking out the videos 🙏🏽💯

[@nclildogg2]

Appreciate it bro!!!!!

[@UndergroundPaintKing]

You’re welcome Ant💯

[@heartbeatinhistory5236]

I appreciate an honest review, the fact there's no sealer and it's straight to paint... that's awesome stuff.

[@UndergroundPaintKing]

Thanks, I appreciate you checking out the video 🙏🏽💯

[@heartbeatinhistory5236]

@@UndergroundPaintKing Nahhh, I did more than that 😁 you've got a new subscriber also! I look forward to checking out all your stuff. I've got an old school van I'm redoing and I learned most everything I know from KZbin

[@UndergroundPaintKing]

@@heartbeatinhistory5236 I appreciate you subscribing to the channel and I hope it’s helpful to you 💯💪🏾

[@3rekoatskustoms929]

Nice demo bruh 👌🏿

[@UndergroundPaintKing]

Thanks Bro I appreciate you 💯💪🏾

[@DiscoGreen]

Love the r500

[@UndergroundPaintKing]

It’s a nice spray gun 💯

[@Iamandthatiam]

Sounds like someone is working for Vevor))

[@UndergroundPaintKing]

🤣🤣🤣 is that what it sounds like

[@Iamandthatiam]

@@UndergroundPaintKing certainly looks that way

[@UndergroundPaintKing]

@@Iamandthatiam so does it sound that way or look that way 🤔 which one is it 😂

[@2koolforyou88]

💯💯👍👍

[@UndergroundPaintKing]

Appreciate you Fam💯💪🏾

[@oldmanintheshopbuiltnotbou8726]

great job

[@UndergroundPaintKing]

Thanks I appreciate you 💯

[@williamchampion1683]

Nice job!

[@UndergroundPaintKing]

Thanks William, I appreciate you checking out the video 💯

[@JusCoolDude]

What are the benefits of using the single-stage paint over the 2 stage paint

[@UndergroundPaintKing]

It can cut down on spraying time and cost in some cases

[@JusCoolDude]

@@UndergroundPaintKing Does it last as long as the 2 stage and if not what could be done to extend the life of the paint

[@UndergroundPaintKing]

@@JusCoolDude depends on your climate. A lot of people like to spray clear over it for extra protection

[@JusCoolDude]

@@UndergroundPaintKing l live in Jamaica so the climate is always hot. Are there different grades of single-stage paint?

[@UndergroundPaintKing]

@@JusCoolDude yes there is

[@triathlete954]

Great video crazy to think for less than $300 you can have a setup to paint panels. What was the hose you used would any brand work and any specific length?

[@UndergroundPaintKing]

Thanks Ian, I appreciate you and I used a 25ft rubber air hose

[@JClarks_Novelty_Vent_and_Chat]

FYI my name is Jim Clark.

[@UndergroundPaintKing]

Nice to meet you Jim!

[@JClarks_Novelty_Vent_and_Chat]

I enjoy watching your videos. Can you do 1 on how to put together your own paint booth in your garage so that you don't get paint everywhere and I also don't want to get paint on the neighbors cars outside of my house. Or their houses.😊

[@UndergroundPaintKing]

I’ll try to work on that but I may have a solution for that soon