Out of all the overseas product's I have purchased, Vevor has been the best in price and build. As always I liked and shared. All my very best.
@madgingercustoms Жыл бұрын
This thing seems to be on point for the price.
@diywgg Жыл бұрын
Love a machine that can't make up it's mind. Another great one
@madgingercustoms Жыл бұрын
Thanks for checking it out!
@tradrodsandcustoms Жыл бұрын
Might have to buy one now, thats pretty slick
@madgingercustoms Жыл бұрын
It works well for the cost. We will report back on it after using it for a while.
@s13intheworks7 ай бұрын
I bought one of these and I have to pump the pedal just like this guy is doing and get it to rotate a little at a time. It won’t turn slow enough to leave it on and weld continuously. You have to tap the pedal, you can hear him doing the same thing but he didn’t mention that at all. I was disappointed that it won’t keep a slow enough speed.
@madgingercustoms7 ай бұрын
It's a spinning fixture. If you need it to go slower you can swap out the motor. Pumping it works fine. You can get all sorts of different speed motors for under $20
@drewmiller94117 сағат бұрын
Is the dial for rotation speed infinite or in steps predefined? Have you tried TIG'n aluminum (charge pipes) on it? Concerned a out amperage
@liamrobinson2084 Жыл бұрын
Good video! How about a basic how-to for that Tig welding?
@madgingercustoms Жыл бұрын
I'm not a professional welder but I can get by with it. There are some really good how to tig videos from guys way better at it than me!!
@liamrobinson2084 Жыл бұрын
Yeah, but I don't follow THEM. AND they're not mad gingers, and may not be willing to take requests, like welding up an arse-kicking barbecue to go with that ice cream truck hot rod!😂
@madgingercustoms Жыл бұрын
@@liamrobinson2084 what type of BBQ are we talking? I'll fire up the plasma table!
@garysimonson9593 Жыл бұрын
A welding positioner that goes both ways. Doubles its chances for a hot Saturday night.
@madgingercustoms Жыл бұрын
Damn right! She's taking someone home!
@MikeyMack303 Жыл бұрын
Thanks for sharing that with us.
@madgingercustoms Жыл бұрын
Thank you for watching it!
@bobreichel5 ай бұрын
I got the vevor turntable, and I hooked up my ground. I started mig welding and heard some sputtering. Now I can't get a ground connection to the turntable. I'm assuming how they ground from the ground attachment fried. The motor is fine.
@madgingercustoms5 ай бұрын
You can adjust the ground pin from what I see. This isn't rated for high amps though.
@gregm38397 ай бұрын
What is the highest amps you have gone? I am tig welding 1” pipe for rv drains and looking to speed up the process. I currently am welding them at about 160amps. Do you think this unit would handle that?
@madgingercustoms7 ай бұрын
No, I don't think this would work up that high.
@brianandglendaharkin9457 Жыл бұрын
Looking forward to the headers on the shoe box . 👍🏻💯⛽️🇦🇺.
@madgingercustoms Жыл бұрын
I'm hoping to get back on the Shoebox next week. We are finishing 2 others videos currently. Some cool other stuff coming up!
@jyoung9327 Жыл бұрын
That would definitely come in handy... Question does it lock on a speed or do you have to hold pedal down? Thinking of other uses for it. Painting for one. Nice video looking forward to header build.
@madgingercustoms Жыл бұрын
The pedal is momentary. You need to hold it down.
@AngryParrotDistillery11 ай бұрын
I bought a generic one of these identical. Pedal was click on, click off. Speed controller on the box set rotation.
@AtlanticBuilt7 ай бұрын
Ordered one! Thanks for the code! And the video!
@FASTPITBIKEoCOM10 ай бұрын
Great vid, thx for this ! Would this be ok to use MIG welding at 250amps ? Need to weld a 0.213" thick pipe to a 3/8 plate. I know it is rated at 80amps but are wondering if it could handle this.
@madgingercustoms10 ай бұрын
I don't think I'd try to run 250 amps through it. They do make a larger version.
@FASTPITBIKEoCOM10 ай бұрын
@@madgingercustoms wow thats a fast reply ! Thanks man Im gonna look into bigger models.
@danobrien3109 Жыл бұрын
Interesting tool, I could see it being very useful . Good job at critiquing the product. On the lighter side brother, in this day and age no one cares which way you “run”. 😂😂. Thanks for the post. 👍👍🇨🇦
@madgingercustoms Жыл бұрын
She identifies as bi directional! Lol.
@tradrodsandcustoms Жыл бұрын
Great vid!
@madgingercustoms Жыл бұрын
Thank you!
@BackFire10mm10 ай бұрын
Hi, is it hollow in the center for purging?
@madgingercustoms10 ай бұрын
Yes, I believe it is!
@replicant3573 ай бұрын
If you have ANY old dc arc , you essentially have a tig welder already!! Save ya money and just get some leads from the people who throw or sell the factory tig pieces to upgrade to CK FLEEEEEXXX stuff. Coz that bright lead makes you Insta good .. never forget that !!
@madgingercustoms3 ай бұрын
Roger that!
@madgingercustoms3 ай бұрын
Roger that!
@stevecarlisle33239 ай бұрын
Welding Tig , and mig requires different speeds. He is welding small diameter material, but if you step up to the table size, it may not go slow enough for Tig. If it does go slow enough, due to the speed controller my be jumpy at slow speed. Be sure to check all specs on postioner,s, as they vary.
@madgingercustoms9 ай бұрын
You can change out these motors easily. I should do a quick video on that.
@stevecarlisle33239 ай бұрын
@@madgingercustoms the motor/controllers are the first to fail.
@bradwiebelhaus7065 Жыл бұрын
Good review.
@madgingercustoms Жыл бұрын
Thank you!
@tdeje Жыл бұрын
great review!
@madgingercustoms Жыл бұрын
Thanks and thanks for checking it out!
@bobreichel5 ай бұрын
I bought this unit and did not get the clip and carbon brush to allow the unit to give the ability to use the turntable for Welding. I've contacted vevor about this and am getting the runaround. They said it's a consumable they drop $60 off, and I then needed to find the brush and clip. I said no way either send the part or give me a return label and a full refund. I wouldn't have any idea where to buy the part and I'm assuming by there reply they don't offer replacement parts rendering it worthless in time. Bad business practice.
@madgingercustoms5 ай бұрын
Sorry to hear that
@spider-man822226 күн бұрын
You can't help this guys out?@@madgingercustoms
@stevenjozefik6596 ай бұрын
Good luck if it doesn't function on arrival ! I bought the 30 kg version and didn't rotate from the get go . After flicking emails back and forth for two weeks , they decided it would be fair of them to give me a partial refund and let me keep the non working piece of crap instead of sending me one that does work , and returning the one that doesn't.
@madgingercustoms6 ай бұрын
I had a gear break on my slip roller from Vevor, it did take some back and forth for sure but they did send the parts. I'm sorry they didn't make it right. You are rightfully upset.
@joshuacoleman2530 Жыл бұрын
For 219 this would be well worth it
@madgingercustoms Жыл бұрын
I'd think so.
@patrickpk629911 ай бұрын
now you can add an arm to hold your tig torch and automate it haha. just dab the rod while the welding is being done for you
@madgingercustoms11 ай бұрын
I like it!!! Lol
@stevemorgan56387 ай бұрын
If you can get through the guy saying “right” every other word, it’s ok I guess
@madgingercustoms7 ай бұрын
Right.
@FrancisoDoncona Жыл бұрын
Another sell out.
@crosse73 Жыл бұрын
@sorryyouarewrong known Dave 30 years… you sir are wrong
@madgingercustoms Жыл бұрын
Yeah completely. Lol
@stanleyshostak2737 Жыл бұрын
You put in the time make videos, edit them, post them, moderate them. All for no income. When someone offers you something for “free” you make the call. In the meantime keep your comments friendly.
@bobreichel5 ай бұрын
I got a carbon brush. Would you be willing to send me some pictures of the clip so I could make it if I give you my email address?