Install Timelapse - Shipping container full of Victron equipment to power a factory

[@110Griff]

blown away, what a super clean install, great work from the fitters.

[@DjayZaJay]

I agree with you so clean.

[@claudiaadelina5094]

0

[@luciangpl]

It’s hard to stop watching this video until the end, it is amazing!

[@VictronEnergyBV]

Tell me about it - It's addictive isn't it! (and I edited it haha - Jono)

[@boubacarsakho1270]

@@VictronEnergyBV please

[@kkostadinof]

Because it is action-packed without time-wasting fluff.

[@whirledpeaz5758]

This looks like something that could be marketed as a modular prebuilt. The Shipping container is inspired.

[@piskai]

around what money we talk about this prebuild can be?

[@jokerash]

@@piskai in Romania the price is anywhere between 900 to 1100 E per Kwp installed, multiply that with 130 Kwp of solar power installed, plus container, cabinets, DC fuses which costs a LOT . Probably we are talking here about 150 to 200k euros for this install

[@xtremeownagedotcom]

That...... is beautiful. I would give away my left nut to have that setup..... Not- because I need that much power, or three phase, but, the workmanship is outstanding.

[@stevelamperta865]

I think you would start to miss your left nut fairly soon !

[@jimjones7821]

@@stevelamperta865 But why? With one nut he could still perform I think?

[@stevelamperta865]

@@jimjones7821 IDK , I'm pretty attached to mine . would you part with one of yours for something awesome in life ?

[@MrCarlRobinson]

I’d give my right nut, it keeps swelling up and causing trouble anyway. I was a Chief Electrical Technician in the submarine service, and that is some fine work!

[@answerback-films655]

energy is wealth...you can never have too much power

[@markgilder9990]

I’m an electrician, and I feel I’m being left behind with all the advanced tech coming out. It’s definitely a young mans game now. Great video.

[@hvacstudent967]

Simple subsystems to learn, complex only in whole system overviews. How do we eat an elephant?

[@user-dy9ux5dc6e]

I "identify" as an electrician. Why would I pay you some astronomically high rate to come play with my new gear?

[@bandido7994]

Never late to learn something new.

[@CollinBaillie]

Mark, check out Andy at the Off-grid garage. Plenty of learning available there and I can guarantee your existing skills will bolster your ability to pick it up with little effort, and bam! you're in the game.

[@MatzeMaulwurf]

American electricians do what the did the last 50 years. There is no progress in the US. drill nuts, 1 phase 120 V. Time to evolve.

[@CowboyBillUSA]

What a beautiful install. With that build quality, you could sell that as a modular system anywhere in the world.

[@piskai]

how much ?

[@legominimovieproductions]

@@piskai a lot

[@TheRealAnthony_real]

Glad to see businesses in my country are stepping up the game !

[@damianc7692]

Superbly done by those lads. Love the fact the shipping container is blue too.

[@KarelČervenka-n3g]

Absolutely amazing installation. Great admiration for Neosolar, distributor of Victron Energy products in the Czech Republic

[@robertdonnelly434]

WOW!!! I believe that I just viewed a thoroughly achievable future!! Cheers from Canada!

[@stefanrudorfer4317]

The last 2 min i saw maybe 50 times. Its amazing clean install. I`m speechless

[@penielsudi6539]

Wood I love how clean the cable management has been done. Great work guy's

[@williamclarke5157]

I fitted my 75/15 mppt and phoenix 12/350 yesterday. Feeling rather little over here. Shout out to the young apprentice. He is in the right trade.

[@MrSavage77]

Big thumbs up to the guys from Darcom Energy and to Cornel for building such a great team!

[@bennysh]

I knew I recognized the voice, it's Juno from Journey with Juno! :) It's been about a year since the last vlog.. Nice to see your very professional work with Victron.

[@VictronEnergyBV]

20 months to be exact! It's me alright! haha. Pleased to see you have moved over to watching Victron Energy vids - Molly even appears in the odd vid too! :-)

[@bennysh]

​@@VictronEnergyBV You're doing a great job so youtube recommends I guess :) I knew you're with Victron somehow but had no idea it's a long term thingy. They did good working with you. Keep up the good stuff and maybe we'll see you again on the boat? :)

[@Scat.original]

WOW, very impressive, the installers did a fantastic job

[@keeping_a_lighthouse3555]

Absolutely epic!!!!! Nice work!!! Love Victron equipment! We use a fair bit of it at work!

[@stevemyers2092]

I am telecom 25 yrs. building cell sites and switches. Beautiful job guys. Impressive artwork.

[@MrRossi1805]

Top made, you find a lot of good engineering companies in Romania. I worked 6 years in Romania, a very beautiful country with many different places and faces!

[@psyolent.]

that cable management is absolutely beautiful.

[@MrDingaling007]

Wow impressive. I think victron are the best. Would love to work in that industry putting together such projects.

[@user-dy9ux5dc6e]

Victron does seem to be the best for modularity within large scale projects but I feel like something like an Outback Skybox is far more practice for the everyday jo like you and I.

[@MrDingaling007]

@@user-dy9ux5dc6e Genuinely curious. How so?

[@user-dy9ux5dc6e]

​@@MrDingaling007 I mean I could be wrong.. SkyBox all in one systems costs ~$3,200 though. For a comparable system under Victron you need. 2x MultiPlus-II 3000's ~$1,285 each At least 1 Autotransformer ~$675 Then you have shunt(s), MPPT'(s), sub panels, communication modules, and other accessories. I also feel for the electrician who installs all this. Couple hours for a Skybox vs a couple days for Victron. That's assuming the utility & municipality even approve the designs for such a complicated system in a residential setting. In a boat or an RV where you can DIY the install without worrying about code and permits then yeah Victron all day!

[@MrDingaling007]

@@user-dy9ux5dc6e Interesting thanks for sharing. Is the victron mutliplus the best comparison tho? I think there are some other Victron all in one options that could be a better comparison. Ill have to do some in-depth research.

[@robbiewright9573]

Absolutely beautiful! Seeing all those Victron batteries made me happy!! Awesome setup

[@a-fl-man640]

that is the prettiest wiring i have ever seen. fantastic attention to detail.

[@brieninsac]

Wow, that is so impressive.

[@craigbutler6243]

Im an electrician & plan on installing a pv, battery & inverter so I dont have to rely on the grid. This is an out standing install & I will be using Victron for my project

[@drteletubby]

Absolutely incredible! I would love to get a solar system with some of Victron's gear at some point. This workmanship is amazing!

[@unixtohack]

Love this !!!! I have such a small install by my own… Victron is Power !!!

[@energieundhobby]

This is how the energy transition works, very good project =) Thank you for showing us 👍 I wish people in germany had as much sense as you do. Unfortunately, it's always about profit here... that ruins everything. Greetings from Bavaria

[@sebastiant5695]

That's the largest busbar I've seen since working with a Submarine Diesel :P

[@charliejohnson5762]

Very professional installation and the video is top notch. Great job Jono!

[@offgridd]

Awesome install! Just starting my first with a Multiplus II 48 5000/70 some smartsolars, a Cerbo and a Batrium BMS.

[@ram64man]

Now that is a thing of beauty, great work team

[@mflo1970]

No me canso de ver este video para mi es una de las mejores instalaciones de victron que he visto

[@simmonslucas]

The cable management is impeccable.

[@ProjectCamper]

Stunning workmanship

[@TheSolarGuyJK]

I want to marry this system gaaaaaashhh The work on those busbars is insane I’m gonna get my short very soon, not this big, but will be impressive

[@keesvandenhoekyacht]

Stunning !! Very neat installation. 👌

[@misterkrispy8010]

Beautiful, impressive installation!

[@markthompson4099]

Unusual to see such fine workmanship overseas, or over here in the US. You can never go wrong with branch fuses. Now look into rapid shut down systems like OUTBACK or Tigo a must to shut down all the power at the panels. This is what I do for a living.

[@hvacstudent967]

Home system, should also use battery inline fuses? How about resetable fuses?

[@markthompson4099]

@@hvacstudent967 They did look at the copper bussing with fuse blocks.

[@regelectronics6128]

Wahnsinn was mit Victron alles so möglich ist, saubere Arbeit !

[@PhasenReise]

Interessant ist lediglich wo die Grenzen des sinnvollen mit Victron sind. Mit Komponenten von SMA zB. hätte man sich 3/4 der Arbeit erspart. Und somit ein Haufen Geld.

[@JosephOster]

Very cool. In other words, the factory itself was contributing to the neighborhood grid failures and this fixed that too? Win-win.

[@BobsMaginty]

Fantastic, looks so clean and tidy, lovely job!

[@MrMino678]

Total clear future of electricity grid not only in the middle of nature

[@KingTesticus]

Wow. That installation looks fantastic. Very 110.12 (NEC)

[@franklindmurphy]

Wow very impressive and amazing. Must have been really expensive but I hope they recoup their costs quickly. Victron great work! Enjoyed every minute.

[@petersamios5409]

Wow. Beautiful job.

[@SmartieTV]

This is so satisfying to watch 🙂

[@stevenlambourne9231]

That's just beautiful!

[@davidhenderson3400]

"Seems we have a lose wire" "OK, this may take few minutes"

[@AltMarc]

Thermal cameras are used to spot bad connections, even more so on older installations...

[@bhartveersingh1865]

Good job man love u from India Punjab Amritsar sport Indian farmer

[@jagzilla1398]

Very nice, almost looks like a room on a map in a video game it's so neatly done.

[@stevetobias4890]

Excellent and super professional install. Would love to have a system to these spec's. I love the big screen giving all the information as soon as you walk in the door.

[@muwagamicheal8317]

Respect, this is the best installation i have seen online. I hope the team that accomplished this project shares there links we might need there services.

[@smashICE1]

Awesome job done, everyone!

[@ouacinc]

Beautiful, please keep us up to date if possible on any system design challenges and things could Improve.

[@VictronEnergyBV]

Will do!

[@ruffriffing247]

Whoever thumbs down on this vid are total haters who can admit this is extremely clean job! 👏👏👏💯🤭🤘

[@Towoawawabo8]

Some guys who wanted to do this that got shocked and are bad electricians 😂😂😂

[@anvildragon7927]

and sometimes it' just bots

[@DavesAstrophotography]

That looks an amazing clean install!

[@arandomfox999]

That's just beautiful work.

[@rogerhargreaves2272]

Wow! That system is so amazing! 😀

[@vincei4252]

Very nice install. Now I have to go lookup how much those 20 batteries cost :-) Thanks for not disabling comments.

[@Spacefish007]

4:05 i like the LED Light hanging form the ceiling :D. But Victron Equipment is really a joy to work with. IMHO it has a perfect design, where no one cheaped out on components, so you get good reliablity and good efficiency, but it´s not "over the top" over engineered or to complex. Perfect Balance ;)..

[@luciangpl]

Just simple and functional :)

[@CollinBaillie]

Looks mike they attached it well. And LED lighting works well for the small amount of time anyone will be in there, and would use so little power. Win!

[@pieterpretorius1014]

that's a pretty serious installation there

[@kuwaitupdates631]

I need like this mini grid for my home but small size 10kw. Your job is excellent very neat and clean cable termination ur work is latest high qualified job.

[@davideveringham4136]

Excellent video! Well Done! From "Call Solar Dave" In Florida, USA

[@guygfm4243]

Good to see such good work well done

[@jwsolarusa]

Fantastic!! 👏 job well done 👍 and keep on the awesome work.

[@nigellaw2990]

That is a beautiful installation 😊👍

[@marcvivori1561]

Nice, very professional.

[@VictronEnergyBV]

Thank you very much!

[@kimj2570]

Whoa. Thats one serious setup. Cost also pretty penny, that must be quarter million EUR at least. Solar panels are cheap, the blue boxes are not. Congrats to them kicking in the balls of local unreliable utility company.

[@chadgdry3938]

super clean, pretty install

[@Corgitronics]

Jono, it's nice to catch one of your videos again!

[@VictronEnergyBV]

Thanks for watching!

[@AlsinoFerreira]

really nice job, a work of art

[@bill2292]

I wish you would do a series regarding system design, integration, and monitoring. Millions of details!!

[@chrishevia]

Absolutely gorgeous!

[@ClintChance]

I never thought I'd have seen node red used in an industry setting! This needs a consumer advisory.. it's pure porn! 🤣 And I love it!!

[@soldermecold7456]

Impressive work

[@NofaKingway]

I thought this said VICTORIAN and was thinking huh must be some sort of factory equipment restoration haha

[@thenuts133]

Now that's what I call a buss bar! Can I come work for you guys please. This makes my system with 2 multiplus and 3 charge controllers look like a toy.

[@gwharton68]

Very impressive installation. I sure would not like to be the technician that has to enter that container when it is energized!

[@tphotographix]

SO FRICKING BEAUTIFUL -

[@surcaandrei]

Great job @DarcomEnergy!

[@rukundojobson2249]

Very need beautiful and detailed!

[@VictronEnergyBV]

Please note, we can't answer technical questions about your equipment or installs within these comments. Please go to community.victronenergy.com to ask those. Feel free to ask about this factory install, however!

[@UNICATexpeditionvehicles]

Great work as usual Victron #1

[@PavolFilek]

I need all this parts to make my own FVE, maybe it will take one year to build and program. Year full of joy.

[@ruffriffing247]

I feel ya! All the way here in California

[@jorjimaco5331]

Very neat. Nice job 👍.

[@markusmathis1811]

Nice install, love the clean wiring. But you messed up with conversion, 120mm2 is 4/0AWG ;-)

[@VictronEnergyBV]

So it is! oops. I will add a note in the description!

[@legominimovieproductions]

TBH, I love setups at this scale with NH fuses for DC applications :D If my battery arrives I too will use NH fuses as main protection (inside a Siemens NH Switch so it acts as fuse and 2 pole disconnect switch)

[@5885ronny]

Sehr gut habe auch alles von Victron 🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗

[@VictronEnergyBV]

Vielen Dank

[@lrobie123]

one of the corporations here in the midwest US installed a massive solar farm on their roof due to their local municipality concern that the growth of their industrial park's demand for power from the downstate Power Utlity will not be able to support their power needs in the summer months. Similar problem this furniture has although sounds like their Power problem is year round

[@Subgunman]

I need a mini version of this system for my home here in Greece. The Grid here is sub standard and over 40years old. Many power outages no matter what time of the year. Looking to do at least 10KW of solar to handle five 5 9K btu, 1 18K BTu and at least 2 24K BTU spits with two smart refrigerators and a freezer. Only problem is that Greece has a 24 % vat tax so I will have to source my solar wisely from abroad. solar should carry a Ø tax price since we are trying to implement a neutral carbon footprint. politicians here are in bed with big oil so I doubt they will ever offer solar as tax free. They have been talking about taxing individuals off grid just to penalize them and put illegal money into the politicans pockets.

[@oshavlfarms7239]

You're going to need more than 10kW. I'm at 6.1kW and my 15k BTU and 12k BTU with battery charging nearly maxes the system out.

[@ralfhedstrom]

Yeap, energy IS a dirty business no matter what kind of system one is using. But like @Vizarei says, I think You are going to need more than 10 kW - unless You have an absolutely optimal charging all day long (10 kW is usually 25 400w solar panels)...and night too :). And on top of that big batteries. It will work as a complement to a well functioning grid to lower the bill, perhaps down to zero....but not for long as a constant/backup source. If your figures are right and my high school education has not left my brain, :) You are talking about at least 100k BTU (sounds A LOT) and 10 kW is only capable of appr. 35k BTU for 1 hour. That system will only save You for a short period of time. I will suggest at least 25-30 kW system or a downsizing of your consumption. We are talking about an investment of around at least US$ 800-1000 per kW here.....and perhaps even a diesel generator as a backup :(

[@bramcoteelectrical1088]

@@ralfhedstrom 35kw should do it and use recycled electruc car packs...80kw for 2k...😆

[@herbertlappert96]

Beautiful!

[@petertomas3665]

I put playback speed at 0.25 to enjoy even better what i watch !

[@dennyqin6944]

well done！quality installation！

[@VictronEnergyBV]

Glad you like it!

[@Tierall]

I trully admire this, but also wonder if it holds up during the winter months?

[@VictronEnergyBV]

I'm sure we will keep people posted on social media! - In fact I shall add a note in the diary to do a follow up.

[@Lo7q7le7guste7mrtf]

Do you take exchange electrician students, if so where one can apply?

[@jahrmichi]

a beautiful offgrid power plant !! wow

[@1popje]

beautiful a work of art

[@spicybaguette7706]

5:08 Gotta love grafana! I participated in the young solar challenge which is a boat racing competition on solar energy in the Netherlands, we use VE MPPTs and BMV. We actually monitor our racing boat with grafana, running a raspberry pi that communicates with the devices via VE.Direct and then sends the information to a server

[@Roll2Videos]

I've been waiting a long time for that seacan to arrive