Video of the year 2012 - Liteville 301 bike assembly

Links:
Complete bike - pics 12:06
Stambecco 20T chainring - • Stambecco 20T chainrin...
How to lace a wheel - • How to Lace a Wheel - ...
How to cut and install a new bike fork - • How to cut and install...
Finally I have decided to buy a new bike. All the components have arrived. Assembling of my new Liteville 301 mk10 can begin.
I`ll start by installing the bottom bracket, front derailleur, chain guide and chainset.
Generously grease the threads. Fitting the Syntace chain guide .
Lubing the axle prevents water of getting into the bottom bracket.
I replaced the original 24 teeth chainring with stambecco 20 teeth ring.
You need Shimano hollow tech II specific tool to tighten the screw on the left crank arm.
Next step is derailleur and Syntace rock guard installation.
After mounting tyres I have to install the disk rotors on both wheels and the cassette on the rear wheel.
See the separate video for fork installation by following the link.
I prepared the cable clamps for cable routing and start with shifter installation. Measure the cable lengths so that the handlebars can move freely. Insert the wire.
I have removed the displays from the shifters and replace them with the cover caps.
Next I'm going to install the brakes.
First I'll install the levers on the handlebar then continue with mounting adapter for the front brake caliper because the rotor size is 203 mm.
I need to install the caliper parallel with the rotor.
Next step is to secure the brake hose to the frame. Check that the hose for rear brake has sufficient space when rear wheel is moving towards the frame.
Now I need to check all the screws and tighten them to recommended values with the torque wrench. Values are written on the frame near each screw.
Lastly I made some fine adjustments of the brakes, gears and other personal settings.

[@bikebook]

You are right and thanks for noticing, but the gap on the tool is damaged therefore it is easier to cut on the outside edge.

[@AlexeiPavlov]

when you cut the fork, there a special slot in that jig where you supposed to insert saw blade, but you cutting it on the wrong side

[@4091740]

Most relaxing bike build ever man!

[@999momak]

best bike i ve ever seen looks high quality

[@thspamed]

I found this video very therapeutic.

[@pakdolan]

I'm drooling at the brake set....

[@shawntroy5327]

i realize it is kinda randomly asking but does anybody know of a good place to stream new movies online ?

[@xavierkylo5655]

@Shawn Troy flixportal

[@shawntroy5327]

@Xavier Kylo Thank you, signed up and it seems to work :) I appreciate it!

[@xavierkylo5655]

@Shawn Troy Glad I could help :)

[@bikebook]

They are Hope Floating rotors and Hope Tech Evo M4 brakes.

[@bikebook]

Thanks.

[@RedpillPortugal]

cool video and bike! congrats!

[@GearJonny]

dream bike...greetings from Croatia

[@Zhiloreznik]

Slin slin, tut jst bi takole sestavljal tega lepotca. Srečno vožnjo!

[@christianperlberg5386]

Nice Looking bike. Good Job

[@paolocorona2590]

FYI use plenty of grease+Locktight!!!

[@liljnnaps1]

WHy did you video this?

[@dillontaylor5738]

that's a cool wrench

[@snoozinglion8596]

Beautiful bike...

[@user-od4ee7sh7b]

مرحبا

[@mit1978]

not good key, for bottombrocket, you need at your frame special tool from shimano, to prevent to damage the paint.

[@lachysgarage5827]

how do u afford that

[@bikebook]

It is Hope Tech Evo M4

[@fishingAx81]

cool bike

[@stevepodraza6363]

Do you still have the 301? I have mk10 and love it!

[@oli100_6]

How long was the rare break wire? 1600mm or 1800mm?

[@cosyloft]

Very good video

[@donnielayzie1972]

good job dude !!!!

[@lolttyl143]

Why don't you mount the adapters and calipers with the wheels off so you don't contaminate the rotor?

[@samufranyo8277]

very good video

[@pacopoblano]

buen tuto dude

[@ryanb34n]

That's some super tight cranks.. Not very free moving :(

[@user-cw4qc9hf2w]

Unplug the washer or assembled in the bolt, which is fixed frame and front derailleur?

[@bikebook]

Ljubljana, Slovenia

[@anonymousguy3826]

freakin awesome bike

[@ErmaTheKitteh]

What is the real difference between a closed bottom bracket and a external bottom bracket? Have not quite known the difference.

[@nadirabelaid6888]

saida zone industrielle et les autres sont pas encore eu l'occasion

[@freeridenativepinoy3342]

Im inlove with your bike:))

[@Ivan.s88]

wow...where is that place ?? 12:22 nice pic.

[@freakingoodkoolmilk]

What's the name of those brake callipers

[@RockShoxLoon]

How is that a fail?

[@BiblicResurces]

and the Bike cost 5.000 eur?

[@jeffzelhart5879]

awesome bike :)

[@DonCelerone]

how much it costs?

[@curtisbest4709]

really nice set up ill give you a sub for that ;)

[@MarioPescaru]

At 8:46 ,from where can i buy some XT cover caps???

[@martinmoravek149]

Inside the display: i290.photobucket.com/albums/ll256/gotosgpls/f860e70b.jpg

[@jimakosthessalonikios6606]

how much does it cost you?

[@timm6088]

And now we'd be running the oval front sprocket of course.

[@shlep444]

surviveasl theyre hopes, go look on their website

[@surviveasl]

What's the name of those brake rotors pls reply :))))

[@lukeratlidge7864]

Awesome.....very sleek;)

[@TheApostolos1111]

τι μαρκα ειναι

[@diogosantos276]

qem dera ser minha

[@sylvester1434]

cable rooting!

[@DHPOLAND99WITA]

Nice bike ;)

[@dedelabinouze5110]

Rock shox pike ?

[@lesterakehurst]

No

[@stephengeoghegan8448]

that is a excellent looking bike and I bet it cost a packet,

[@Mr.WhiteMr.]

Блинаа, при наличии динамометрического ключа кассету затягивали разводным XD

[@vincesnetterton5868]

notice the lack of price / value

[@surviveasl]

Tnx!!1 :))

[@fjsu.]

Nes

[@phil3267]

more motivation in speeking boy

[@AnoniMArtShowPhotography]

i love the bike , and the parts . are rezistent ... how long did the anssmbly thake ?

[@erer12345689erer]

oh chit

[@oliashton8462]

Has anyone ever told gouthat gou sound like Arnold Swartsnager

[@johngraboski]

I don't like it!!! I LOVE IT!!! :P

[@TheApostolos1111]

ti marka ine

[@ganeshnimbolkar273]

यभडतथ

[@_Waldezas]

This baby must have cost a fortune...

[@mariorodas7731]

MARIORODAS

[@thomaspfisterer5783]

wheres ur torque wrench???? wtf are u serious??

[@nadirabelaid6888]

sudiste

[@BogdanGabrielMarinica]

she is beautiful

[@hugoantonini]

Could u sub your videos? Please!

[@CurvedSlightly]

You got an ISCG mount frame but you got a BB mount front mech? FAIL

[@leonteflorinel8808]

Amateurs..... You could have used an adjustable torque wrench at least at tightening the bottom bracket..... Real amateurs....the way you turn that wrench, my , oh my ...

[@leonteflorinel8808]

DickHeadStrong Leonte Florinel Also the rear derailleur hanger was tightened incorrectly :( Stupid amateurs.

[@BFX9000]

DickHeadStrong Leonte Florinel You know what's worse than amatuer? Elitists. =D

[@huuhungnguyen6373]

BFX9000 He's not that bad! ;)

[@leonteflorinel8808]

Huu Hung Nguyen Indeed ;) I still wouldn't let him fix my bike, that's for sure :)

[@huuhungnguyen6373]

I agree w/ u :D

[@lesterakehurst]

I hate the bike eww

[@michaelarz277]

Why?

[@dimiturlazarov531]

WHAT DA FAK are you doing guys .... STOP showing EVERYONE how to fix their bikes ... now , for example, in my country every boy , no matter how old (8-12), is trying to repair his own bike by himself .... the result is horrible... if you wanna buy something second hand - 90% of the bike parts are fakin messed up , half broken , on 1 HP .... if you work in service, you have to deal with thous shiets every day....Cuz when you watch thous clips , it looks sooo easy ... but its not ...

[@TheApostolos1111]

τι μαρκα ειναι

[@lachysgarage5827]

how do u afford that