Video Review: Transformers Movie Masterpiece MPM-10 STARSCREAM

Get it at TFsource! tfsource.com/masterpiece/movi...

[@Luke-kv2ot]

"he also has a robot mode, and i guess let's try to find it"

[@Keldroc]

The flaps on the tailfins aren't flush because you have to snap the big pieces into place. It feels like they'll break but they'll snap in and the little piece will sit flush when the big piece is in place. Edit: Haha I see you figured it out during the video

[@SpartanDara]

I just picked this guy up today too! Found him on clearance for 50% off at my local target, which was an absolute steal! Apparently a lot of targets in my area are doing the same, so i’d check yours asap!

[@Sam.Mercer]

I just got mine from target on clearance for $75.

[@ffmedicjeff]

“I’m retired, goodbye.” 😂😂😂😂😂

[@kevinplanb1]

Mpm screamer is $44 at target. Can’t beat that, he is the best representation of starscream at a lower than leader price point

[@quocd5580]

Mine has the loose right shoulder. Nail polish !

[@crow6226]

Thanks for another great review. I appreciate you making these videos throughout the years. Personally, I love this figure. The depth in robot mode really makes it difficult for me to overlook how flat the HFTD or SS Starscreams are. Thanks for being a good human being.

[@Jfigs94]

I just can’t accept that they didn’t put in a real bicep swivel

[@JM-zw8cq]

Agreed they skimped out on bicep swivel...very disappointing

[@justbidd3126]

In hand you don't really notice it because of his butterfly joint it's a great figure trust me I'm picky

[@Jfigs94]

justbidd 312 I just got him in hand last night and I still can’t let it go lol, I’m able to cheat it by untabbing the arms under the diecast bicep, but they could have put a real swivel in there easy

[@lowellmartens6135]

This is the first figure in over five years that I purchased a KO. It is just so much better of a figure. I like the sculpt, but the official just lacks paint an QC. The only real problem now is my official MPM Megatron looks really drab next to the excellently painted KO. Thanks for the review.

[@KJF-ny]

Felt like I was watching Craig Ferguson.

[@duffzilla1292]

He’s not an F-35 in the films. He was an F-22, they’re similar looking jets but he is an F-22

[@peaugh]

Yeah, my mistake. I was tired when I was shooting.

[@AlexReynard]

That was exactly as long an excruciatingly-long pause as it needed to be.

[@legoawcstopmotioner9435]

I don't really dig MPs but it's kind of cool to actually see one in stores.

[@Bodehn]

There are two little tabs that fold out from the cockpit when it's open, to hold those two dark grey pieces on either side of the cockpit in place, just in case you hadn't noticed it before now ^^'

[@peaugh]

Yeah, I show it off at the end of the video

[@bertoancila1721]

You play on Switch too? Cool!

[@gregimusprime7478]

People complaining about kibble underneath him. There's no such thing as mass shifting in real life. All those parts have to go somewhere. It's either kibble or partsforming.

[@xstube9621]

You haven't seen a VF, besides the original leader class had a better underside

[@d-zastroid7427]

Gotta say this things pretty nice to look at, especially with that paint work

[@Luke-kv2ot]

"even tho he's like a giant. .... kite"

[@Jaytheradical]

How is it this masterpiece toy has a worse alt mode than a mainline leader toy from 10 years ago? Wild. Only major upgrade I see from the 2010 leader is better leg articulation, real booster jets, and he has his saw blade. Gonna stick with the Leader, I think, he looks good hanging out with WJ Blackout.

[@TheRealDustinNunn]

Not a bad MPM Starscream V2 mold, but he is lacking an ab-crunch, he is lacking a waist swivel and since when did Movie Starscream have a butt-flap? MPM Starscream needs a version 3 remold.

[@JM-zw8cq]

The rear fin problem appears to be that you are not “snapping” the lever PCs into their place. There is a clear form snap to lock them into position and that keeps the bigger fins close and connected firmly to the smaller fins. Hope that helps. I had the same problem until I realized there is a clear lock in snap to the larger fins

[@JM-zw8cq]

Update u figured it out yay lol

[@gtp_vexd3507]

“Hurrrrl le bleh bleh” I know this kind of transformation........ sentinel primes....dx9 mightron...... TF Prime smokescreen..... Your pain is felt. Love your work. 🤣👍🏽

[@JacquesChueke]

Absolutely loved the toy, but is there any way to insert a pilot in the cockpit? Did anyone try to unscrew or remove the canopy? Kida scared to try it...

[@pavitraarvind3013]

Mine ankles are nice and tighty though no problem standing him up

[@coolprimesthefourteenthpri3495]

I love the video you made

[@quocd5580]

$75 @ Target, half price, yeah

[@lipranditoys]

There's a variant coming out, it's the same but they crossed the word Masterpiece on the box...

[@ptking006]

I absolutely hate these new paper instructions. They're so hard to read. Especially for the studio series figures. I spent way too much time staring at scavengers instructions. They need to bring back the glossy paper they used to use. Those were so much easier to read.

[@lt.creggar5903]

Oof! I think I’m gonna hold off on transforming mine. I haven’t even transformed my MPM Megatron yet because the transformation looks so intimidating. My favorite representation is the Black Mamba Star Adjutant.

[@gdavidgrana]

Quick Q: Is he a worthwhile update to the Hunt for the Decepticons leader we got some years ago?

[@tristanmahler4471]

The general consensus is no at his standard price, but if you can find him at clearance (if you're in the US, Target has a fair amount of overstock and they've been spotted cut down to $75) obviously that changes things.

[@quocd5580]

I still like leader class tattoo Screamer, easier to transform. But the lack of details and feet are cons of that toy

[@iBeamer]

Not only showing up at Target's, but my target had him on clearance for $75! Too bad I don't want movie Starscream.

[@CannonFodder93]

Really want to get this guy. I hope I manage to find him for a good price someday, but knowing my luck, it may not happen. :( Still, a very nice figure.

[@palpatine1975]

I guess masterpiece movie line has the best representation of the Bay Transformers.. The MPM Barricade, Ironhide, Prime, jazz.. Starscream is no exception, fantastic in robot mode but... Still could do with more paint apps, and Hasbro still needs to solve some of the engineering and the kibble issues when he is in jet mode. And for the $200 price tag, all that issues need to be executed to justify the price tag. Still the MPM is best Starscream to date.

[@fordprefect294]

It's not your age, the instructions were...problematic at best for the first go-round

[@_V.Va_]

Modern Transformers instructions tend to be complete crap.

[@Nomadfilms_]

You missed the tabs on the cockpit that fold out

[@peaugh]

Watch the whole thing.

[@princeaphan8274]

Screamer never looked more like a Dorito chip than now.

[@NemesisTomato]

It was long enough to be awkward, yes. Also was funny. :)

[@SuperiorAmericanGuy]

Starscream seriously screams all the time and made people scream his name in terror all the time.

[@Nomadfilms_]

Bruh you didn’t even tab his knees in properly either wtf

[@scottmackie8900]

We’re is your bruticus review

[@peaugh]

Which one? The Ocular Max? It should be part of Probus’s video.

[@scottmackie8900]

Yes mmc

[@brimstonehalo]

Even on clearance its a no

[@deadpoolinthehouse]

Man I just realized how much I hate this design for starscream haha

[@mx472000]

God, the Bay-formers designs are so damn ugly!