Thanks for the video. Can you please confirm that images taken by camera are saved & on power off & again on power up retained in memory to open lock as before or the images are lost.
@C.I.N.D.Y Жыл бұрын
You are so kind! sharing ideas like this I'm from Philippines! thank you so much more power and God bless your channel!!
@slavric3 жыл бұрын
I watched both of your videos. I suggest you remove the protective sticker from the lens for better image quality. Otherwise very informative, thanks for sharing.
@huuthangnguyen55222 жыл бұрын
mee too. and i don't know how?
@AshutoshGautam-i4u10 ай бұрын
so beatuful so elegant just lookig like a wowww
@unmeshbhunia15874 жыл бұрын
Thank you sir ... To make this project .. I am that guy to email you And you reply that you will But i was hoping you will And you did it ....
@aniketwanave35916 ай бұрын
hey bro can you tell me how did you got his email id
@j.jeganjega47613 жыл бұрын
Thanks for your video... Can you pls explain ESP 32 CAM board camera contain IR filter?. If not, How it detect face after sleep mode or some times later?
@SuperAbc20154 жыл бұрын
great idea i were searching for material linked to esp cam and you give me more inspiration with face detection future thank you
@Abbici4 жыл бұрын
Wonderfullllll! Little help... PLEASE PLEASE.... Once the faces are memorized, can I delete the wifi? This is because I would like to make it work simply to open a box even outside the home
@ΝΕΚΤΑΡΙΟΣΚΟΥΡΑΚΗΣ3 жыл бұрын
thanks for your tutorial...i made it but the connection to wifi is unstable even the signal is strong and some time esp32 chip overheated.Can you recommend solutions? THANKS
@yupingliao40782 жыл бұрын
add antenna
@yupingliao40782 жыл бұрын
power DC5v 2A
@vivekandgauravkumar62704 жыл бұрын
Sir, most hai lekin hindi me samjhate to bahut achchha se samjh me aata sir . Sir, face tracker robot banate sir koi bhi toys me set kar ke banate sir jo face track karke aa jata sir most hota . Sir, Please 1 video uspe bhi banaye.
@amtsbi3 жыл бұрын
this is awsome. I have one query. what is we use image for respective person. will this work.
@sltechgalaxy16773 жыл бұрын
you is a genious bro we want morevedioes like this i am a sri lankan
@nwbstplyr3 жыл бұрын
What if I change the solenoid lock into a motor since I want to open/close a door. What would be the changes I need to do? Thank you for the response 🎉
@TechGuruOfficial10 ай бұрын
Which simulation software using explaining for breadboard connection
@anonymousanonymous16063 жыл бұрын
Nice project is it posible that I made a switch on this like on/off
@chirots3 жыл бұрын
This is what I am looking for coming project
@aberateklehaimanot98044 жыл бұрын
great project,trying compiling the code but not possible, sketch too big, Arduino ide 1.8.8 .and any link to the camera.h library and how to install it.Thanks in advance.
@muhammadsalem9924 Жыл бұрын
I want to implement this project "Design of Driver Awareness system depending on Eye and Face Feature and Discrimination" Can I use ESP32 instead of Raspberry Pi ? How do I program it and what do you use ? please reply
@JNET_Reloaded4 жыл бұрын
its actually face recognition!
@BangLucky-j6g Жыл бұрын
Can you explain about facial recognition code? Thank you.
@haseeburrehman29425 ай бұрын
Hi, can I use normal esp32 cam or I have to use esp32 aithinker. Im new to this.
@abdurrahmanchauhan47802 жыл бұрын
Hi @Viral Science I followed your tutorial but got shucked at 1point.... When I am connecting ESP32 with power supply of FTDI it works properly but when I connect external 5V power supply it starts printing random string in serial monitor and fails to connect and work!!! What could be the possible reason do you have any idea?
@adityakante53958 ай бұрын
bro which software you used to make this circuit connection diagram...please
@TechExperiMents20102 жыл бұрын
Bro which software you are using for designing circuit
@lazolangcwangu5377 Жыл бұрын
Hi, did you get your answer?
@TechExperiMents2010 Жыл бұрын
@@lazolangcwangu5377 no
@manohar4g0203 жыл бұрын
Could u suggest me some better ideas for my mini project based on iot
@resultsfromhardwork3824 жыл бұрын
Super Super, How Many Face Can Save and Open The Door? Or Only One Face Only Accept?
@veda61652 жыл бұрын
I like you video and I'd appreciate if you can enlighten me about how does the module works. Is the wifi network only needed for displaying what does the camera sees or do the esp cam module itself requires a wifi connection to work?
@sathvikad97236 ай бұрын
Bro can we use HW 131 converter instead of using 3405 regulator
@dathurampabba6363 жыл бұрын
How are getting those facerecognition face detection buttons,is it because of the code which you have written or is it by default given by ESP32
@Shylockcharm2 жыл бұрын
Does this system constantly need to be connected to the internet?
@beastking95322 жыл бұрын
thank you bro it helped me in my mini project
@AutomobileEngineer364 жыл бұрын
After saving the images is it possible to make it work without computer or mobile phone.
@SumitVerma-id3zk2 жыл бұрын
can I use this for my college? project will this work?
@maramalhujairi35843 жыл бұрын
Hello!! Thanks a lot of the video. I just have one question, why did you use 9v battery in the diagram or is it just for demonstration?
@iamaditya693 жыл бұрын
The 9volt battery is for only showing in diagram,,,,, solenoid lock needs 12volt to work properly,,,, I am making this project for face controlled scooter
@musiczee_2 жыл бұрын
@@iamaditya69 can i use 2pc 9v instead of the 12v ..? Is it works with two 9v battery..? Please reply.. 🙏
@iamaditya692 жыл бұрын
@@musiczee_ you need to use regulater,,,,,as if you give 18 volt your circuit will burn
@musiczee_2 жыл бұрын
@@iamaditya69 which regulator i have to use please say..if i use 18v with the whole diagram and things that u use is it will burn the diagram...?
@musiczee_2 жыл бұрын
@@iamaditya69 please mention which regulator i have to use...
@amarishparmar Жыл бұрын
Thanks for sharing such project, i tryed to download your codes from your given link, but the file is currupted, could you upload new one, thank you..
@macinissa41334 жыл бұрын
Awesome application. I am assuming that your phone present in the set up is just to show the face recognition action; in the real application of unlocking the door, it is not needed - right? Please, confirm or explain what I am missing. Thanks!
@ViralScience4 жыл бұрын
Yes its not required
@yawarsaeed64992 жыл бұрын
Thanks for sharing such an Awesome project. Can you please confirm, the detected recognized face is stored in ESP32 CAM when the power is removed. Secondly, can I store multiple faces to get them detected & recognized by ESP32 CAM to open the door for them automatically. Awaiting your earliest response. Thanks & kind regards.
@Jay-ik2ie2 жыл бұрын
can you help me sir, it is possible to have two esp32 cam to control the lock from outside and inside?
@meghanarprakash7862 Жыл бұрын
Can we implement number plate recognition and opening door using this?
@farahnaz53994 жыл бұрын
Very nice project but I ask question I make same project but my project was not work please tell me how to correct the project
@SilveronGaming2 жыл бұрын
HELLO I am making the same project i am doing all connections right as per the video but the circuit doesn't seem to work all components are properly attached , share your guidance .
@hakanylmaz8472 Жыл бұрын
Can i use 12v dc adapter instead of battery ?
@kingfaivar10 ай бұрын
Awsome video, Please what software did you use for the circuit design?
@navisaf54892 жыл бұрын
hello sir, i have a question in this project, what is method used by face recognition ? (ex: eigenface, fisherface, etc)
@jashufanclubftafk92863 жыл бұрын
Just Arduino is enough or we need to use any other . If type the ip address we will get the page in the net.
@yogeshsarjane64442 жыл бұрын
Which simulator you had used for simulation?
@sunnyshrestha3173 жыл бұрын
How many output pins can it handle..can I use it to turn on say 3-4 loads like lights, fan, heater ..
@_MRUNALDUPATE3 жыл бұрын
Can i use 12 V DC adapter as power supply and Which DC Adapter is used 12 V 1amp Or 12V 5 amp
@personalpic Жыл бұрын
hello, Is it possible with this project to identify words, numbers?
@electricus_aniruddhachanda81843 жыл бұрын
Nice project but also tell us somthing about the solenoid lock you use
@haniessofea62053 жыл бұрын
Can I know the method used in this project either it is Cascade Classifier method or any of this techniques Linear Binary Pattern, Eigenfaces, Fisherfaces?
@_random__vlogs_3 жыл бұрын
Which algorithm is uses for detection and recognition.?
@phucphamhuu87634 жыл бұрын
It allows for as many people, I want to lock the main door for 4 users. Thanks
@n_suwannarat2 жыл бұрын
Thank you bro
@bimalk29183 жыл бұрын
can we enroll multiple faces for recognition, i mean for all family members? If yes, how?
@piyushchiwande653 жыл бұрын
Hello brother 4:20 which software is this? Plz reply this is urgent
@bepo12474 жыл бұрын
how many faces can be stored? are the stored faces enrolled will be keep saved even though the power is off?
@TheAbsolutelyAnyTechGuy4 жыл бұрын
Nope faces lost on power failure
@ra1985823 жыл бұрын
how did you modify the library? there is any way to understand what did you do to create the variable matchFace? thanks
@bohdn3 жыл бұрын
Hello!🤩 Does it work without a smartphone?
@bohdn3 жыл бұрын
maybe yes
@lawalmohammed832 жыл бұрын
Please if your face is identical with another like twins , will it detect the difference?
@shoosh17807 ай бұрын
That’s awesome 🤩 Can i do it and remove the Leds?
@LaukikWaikar7 ай бұрын
Did you code worked?
@shoosh17805 ай бұрын
@@LaukikWaikaryes but the IP is not show I’m searching now for a way to fix this problem
@C.I.N.D.Y Жыл бұрын
what if unknown person will know the IP address can you change it? can you make tutorial how to register multiple faces? please answer
@beldanayoti27583 жыл бұрын
Function of LEDs. Are they a must?
@teslaguy53114 ай бұрын
no, unless circuit is powered with AC voltage. It’s powered with batteries which is DC, so answer is no.
@zihangkuho71183 жыл бұрын
can we use this lock without mobile or pc after enrollment
@R1SK6484 жыл бұрын
How does it compare to the Huskylens?
@musiczee_2 жыл бұрын
I have done totally same as you done in your project or video but my prblem is when i am giving power to the circuit... the selinoid lock getting automatically unlocked... please help me sir
@amoghavraikar37953 жыл бұрын
Sir,what are you used in back side of 7805 regulator. It is heat sink ? (Black color symbol like E). Please reply We have to do it
@amoghavraikar37953 жыл бұрын
Please 🙏🏿🙏🏾🙏🏽 reply fast
@bobykhomaini41423 жыл бұрын
bro, can you make a face recognition door lock system project using python. btw thanks for the knowledge
@dhimalbro4 жыл бұрын
Will it work for 100 plus unique faces? Please reply
@MrNixified4 жыл бұрын
Can i use the same concept using magnetic switch?
@kevinlowell5564 Жыл бұрын
bro..the solenoid lock required 12v but how come in the diagram u only use 9v?
@dgadstv387610 ай бұрын
hello sir. i am new to esp32cam. To what pin did you connect the solinoid and may i see a sample code.
@aizzadaiman3 жыл бұрын
hye can i know what software you use for create simulation?
@iamaditya693 жыл бұрын
Fritzing
@arcdata9889 Жыл бұрын
Why haven;t you shared the links of products to buy? Plz if possible share the cam link atleast.
@techyjagdish94644 жыл бұрын
I like project❤️❤️❤️❤️👍👍👍👍👍
@techandroid49993 жыл бұрын
Should we be connected to wi fi to unlock ?
@judenneciervo47292 жыл бұрын
Hi, im just going to ask why the camera keeps freezing
@abirislammishad77554 жыл бұрын
Can I add a display that will be located beside my door and when I will go infornt of the camera , I will sure that my face is properly inside the range frame of the camera?.
@yagamilait74544 жыл бұрын
please testing the cam with your picture and tell me the results
@d.karthiktechy93362 жыл бұрын
how can we extend the time of 5sec unlocking,and how to enroll the multiple face .bro reply 🧐🧐
@ikazodba2 жыл бұрын
Plz, next project Let us enjoy your project by decreasing the noisy music background , thnx
@areticharan3 жыл бұрын
in the place of UART, can we use Raspberry pi?
@krushilmehta4 жыл бұрын
your project is too awesome bro, but can you tell me which software you are using for creating this diagram of ESP32.
@iamaditya693 жыл бұрын
Fritzing software
@deeghovlogs11 ай бұрын
Please Make Fingerprint & Face Recognition Door Unlocked System Using ESP32 please one video on this
@charantejah31814 жыл бұрын
Nice video bro on esp32 cam Can u make a rc on it
@varunpandya57994 жыл бұрын
Will the door be opened if I show a photo of the person who can access the lock from another mobile phone ?
@nsk6914 Жыл бұрын
can i enroll multiple face in this project
@focusonprojects34554 жыл бұрын
Can I use an arduino uno besite a an UART TTL PROGRAMMER ?
@ziwalouay58493 жыл бұрын
do i need to make the webpage always open to unlock the door ?
@PavanInnovations2 жыл бұрын
Hi I have configured everything but I am facing an issue with enrollment. While clicking enroll it's not responding to anything.please help me.
@ajmalali70502 жыл бұрын
Which software did you use to simulate at 4:32?? Is that TinkerCAD??
@azriking2 жыл бұрын
I think he used Fritzing to design that
@tahlaa14703 жыл бұрын
Can i use arduino uno instead of Uart ttl programmer?
@ayanjoshi26018 ай бұрын
Hello , I have a doubt if I want to add features like loggin the data and sending sms or alert after every detection what can I use and How can I use can you please guide
@maheshmurugan55274 жыл бұрын
Bro i need your help , in programmer AVR ISP is not showing and code is not uploading it says that fatal error please help me bro 😥
@nwbstplyr3 жыл бұрын
Great stuff! Planning to do something with the recording option of the system. would it be possible to automate its recording? thanks!
@pedroleonard20073 жыл бұрын
instaBlaster...
@urdu600 Жыл бұрын
can esp32 cam compare save image to detect real face open door lock
@TechnoSAP4 жыл бұрын
Very nice video bhai
@62_ashishsanvatsarkar324 жыл бұрын
It's not 3d like Iphones so when a photo of big size (like mask) is shown to camera will it open????