ItsJustA6 Gets a VMP Gen3 TVS | Before and After Dyno Pulls

ItsJustA6 and his 2016 Ford Mustang GT have become quite popular in the KZbin community. While already laying down some great horsepower numbers with a Roush blower, ItsJustA6 knew there had to be a way to gain even more horsepower.
That's when he called VMP, and we invited him to the ranch for a VMP Gen3 swap. Check out the video to see just how much boost was added when swapping to the Gen3.
Final Mods Include:
✪ VMP Gen3 TVS Head Unit: bit.ly/VMPGen3HeadUnit
✪ ID1300x Injectors: bit.ly/1300xINJ
✪ VMP 79 mm Pulley: bit.ly/79Pulley
✪ Corsa Long Tube Headers
✪ E85
Get your VMP apparel here!: bit.ly/VMPMerch
------------------------------------------
Subscribe & Follow: ►KZbin: bit.ly/VMPSubscribe
►Facebook: bit.ly/VMPFacebook
►Instagram: bit.ly/VMPInstagram
►Twitter: / vmpperformance
►Website: vmpperformance.com
------------------------------------------
Our live shows are now available in MP3 format!
Soundcloud ➤ / vmpperformance
Itunes ➤ bit.ly/VMPPerformancePodcast
Google Play ➤ bit.ly/VMPGooglePlayPodcast
Have ideas for future shows? Let us know in the comments below!
------------------------------------------
Have you seen our shows?
Tune in each week for:
✪Tuning Tuesday | Tuesdays at 1:30 PM EDT ✪Burnout Box | Thursdays at 6 PM EDT

[@thesquirrelchroniclesakare7808]

Justin you crushed this video and the mods on the car. Great job bro

[@VMPPerformanceTV]

Thanks!

[@tomcronininc]

What a badass video I absolutely love the content that you guys put out VMP for the win

[@antprice2012]

Hey I was 50 hp off and I’m excited for Gavin! Y’all are a step above!

[@VMPPerformanceTV]

Appreciate it! Hopefully he gets a built engine and hits 1,000 soon! - Max

[@antprice2012]

Shoot yes built motor with y’all on board easy 1000

[@brittmartin4293]

The editing was dope!!!!

[@VMPPerformanceTV]

Thanks for the comment britt

[@xtreme3484]

Video edits looking great!

[@VMPPerformanceTV]

I'll let our videographer know, he's making an appearance on the next vlog!

[@adrianreyes2795]

BADASS 👀

[@jefferymaclean9467]

That's an Impressive difference, no Doubt.

[@VMPPerformanceTV]

Absolutely. He'll pick up even more with a built engine and smaller pulley.

[@jefferymaclean9467]

@@VMPPerformanceTV as I said, can't believe how much already, watched the other videos as well about ,even smaller pulley will gain more. But yes a built motor and what a Freakin Beast.

[@jefferymaclean9467]

You guys should reach out to AutoVlog KZbin channel. He has a 2015 f-150, he has been talking about supercharging. Just hasn't decided which Supercharger to go with. Watched your video doing a 2014 f150. Think he'd be very Impressed for sure. Also he has a lot of followers,. I believe a collab would be great. Just saying.

[@VMPPerformanceTV]

@@jefferymaclean9467 Thanks for the suggestion! We've been in contact with him a little bit, he's just a little far away up in Pennsylvania. We'd love to collab with him though.

[@mr.roush6709]

god I cant wait to get the GEN 3

[@VMPPerformanceTV]

Did you see Gavin's coupon code? check out his videos.

[@mr.roush6709]

@@VMPPerformanceTV yep

[@blazing420loud9]

Here because of Gavin I know it’s a bit late didn’t even know y’all had a channel ❤️

[@SeanTheDetailGuy]

Awesome video and awesome job on the car. Any chance of you doing a car build from scratch

[@VMPPerformanceTV]

Tell us more about what you would like to see..

[@SeanTheDetailGuy]

@@VMPPerformanceTV i mean like bring a stock car to a race car

[@Bubba-Ho]

Something tells me your site is about to blow up. You guys are killing it right now, between Cleetus and itsjusta6 everyone's asking about you. Long tube headers, E85, Gen3 and tune making 900rwhp on a stock block, dam! Stangmode needs to get a Gen3 tuned by Justin, maybe Demonology would stop laughing at him. Hey Justin, have you had any experience with this typewriter tick everyone is talking about on 18-19 Mustangs? Great work, you seem like a genuine guy, all the best to you are your team....

[@VMPPerformanceTV]

Thanks for the props. Jury still out on the tick.

[@rggt6225]

VMP MAKING IT HAPPEN AGAIN

[@VMPPerformanceTV]

We guarantee it! 👍

[@sn95_mustang_garage]

Been telling Gavin to get a VMP blower for a long time. Been telling the Goonzquad boys the same thing for months.

[@KPY4EHET]

Love it! Put one gen 3 aside for me😁

[@VMPPerformanceTV]

You got it

[@66barreto]

HI any mustang cobra with vmp gen 3 dyno numbers thank you.

[@ryanmcgauley2331]

regerete turboso you’re on KZbin, pretty sure there is a search bar at the top.

[@VMPPerformanceTV]

We have released numbers during out tuning tuesday shows. There are a TON Of 03 cobra combos out there, tell us what you've got, and we'll put together a recommendation and power range.

[@maximusvonce1381]

How much was boost on 79mm pulley

[@VMPPerformanceTV]

The 79mm pulley is roughly 16psi peak on a 2.65L TVS supercharger such as the Gen3, Gen3R, and Odin.

[@maximusvonce1381]

@@VMPPerformanceTV Hey just to clarify. I can still use stock upper idler with 79mm correct? No idler pulley change till 75mm pulley?

[@maximusvonce1381]

@@VMPPerformanceTV Well i am only at 13psi with 82mm. So i probably wont hit above 15psi with 79mm

[@brittmartin4293]

What song is that????

[@ricardosimon1975]

How much whp can the stock engine handle? Looking to buy this kit. Thanks

[@VMPPerformanceTV]

The engine in this video was stock, and it was 900 rwhp.

[@ricardosimon1975]

@@VMPPerformanceTV but is it save? Thanks.

[@BarnfindGT]

If you want a safe number then keep it stock that’s about as safe as it’s gonna get lol😂 but on a serious note who knows every individual car is different

[@c5vette368]

“alright”

[@VMPPerformanceTV]

Enough?

[@c5vette368]

The music was lit! Can i get gen3 on my 07 GT?

[@VMPPerformanceTV]

There are ways, you can use a Department of Boost kit and our head unit.

[@masta51]

Hey, I was off by 2hp on the guess! Woo now where's my stinking shirt! ;)

[@VMPPerformanceTV]

Which video did you comment on?!

[@masta51]

@@VMPPerformanceTV kzbin.info/www/bejne/f5KrlWytnNCXhtE 898 was my guess ;)

[@VMPPerformanceTV]

@@masta51 Send us a DM!

[@masta51]

@@VMPPerformanceTV thanks again guys for the hookup!

[@davidwarden6011]

I guessed 877whp on your live feed video. Justin said within 5hp gets a shirt, and within 15hp gets a sticker. Unfortunately since it was a live feed my comment didn't appear.

[@dshook1989]

David Warden all the live feed chat videos are recorded also.. you’re just lying. Go scam someone else Scumbag

[@ryanmcgauley2331]

You honestly think someone is trying to scam someone over a $3.55 T-Shirt? If so... whatever karmas a bitch.

[@kjusticeg1]

Come on tax time..

[@VMPPerformanceTV]

Or Black Friday...😜😜😜 - Max

[@MrIsmile3]

I said 900😉

[@VMPPerformanceTV]

Send us a DM!