Volkswagen Golf R32 Rocker cover and PCV replacement

[@jakebrakes1675]

Great vid man Appreciate the you sharing Certainly made my life easier removing the rocker cover 👍

[@donaldthemtber]

Good job man I used this to install my PCV valve this morning.

[@madscientistkicks]

Donald Rucker does this fox the high pitched wistle from the air going into the small vent hole?

[@donaldthemtber]

JonnyHypebeast yep perfect

[@madscientistkicks]

Donald Rucker thanks for the reply

[@hankj8024]

Awesome video very informative and helpful keep up the great work!

[@Gratiz86]

Do you have the part number for the Pcv Valve

[@duttonfx]

Can confirm those front intake manifold bolts are a bitch to get to. I ended up stripping one of the bolts so I just removed the whole radiator support/crash bar and extracted the bolt. In the future, I'd just remove the whole front support to avoid wriggling around with those m6 hex bolts lol. Whilst you've got the valve cover off I would suggest painting it (I painted mine wrinkle black).

[@MrEddie8852]

Thanks man.

[@PatrykSieradzki]

How much Nm for bolts of valve cover ?

[@nick_conti]

Mine is making a pulsing high pitch beep sound I don't suppose that is normal but car seems to run fine no cel or anything , any resolution or normal ?

[@Two_Phones_Eddie]

Top video, found oil on my Coilpacks and think it is the valve cover gasket so hopefully if I replace that it should sort it. Did the gasket set come with gaskets for the spark plugs (the round ones)

[@reapertmx2726]

I'm having the same problem, is that what it was ?

[@12w0]

quick question. how many quid did this entire job cost?

[@heyheysaturday2492]

It does show that you can just take any VW to any mechanic shops unless they are specialist VW as far as I know VW alot plastic are very flimsy I recently got a r32 & when I open my hood the lever feels like going to snap

[@MrTruepower360]

Awesome video man! Might push me to do this myself and stop being lazy! Curious as to how long it took you total? Cheers

[@donaldthemtber]

ZENITH2000 do it man it wasn’t that hard, watch his video and take your time. You got it.

[@michaelbetancourt3954]

Do it I was in the same boat it's easy as long as you move the bumper it's easy

[@Smashedcrab2]

Hi mate, roughly how long did this job take in hours? have to attempt this on mine soon!

[@512460]

Why did you change the pcv? Was you getting a sucking noise?

[@4scoopz354]

Yeah pretty much which is a due a vacuum leak. I researched after and saw that the issue will still persist just like the car I had unless you get a new valve cover getting a new PCV won't resolve the issue.

[@512460]

@@4scoopz354 soo to get rid of the leak the PCV and Valve cover both need changing? To Get rid of the issue permanently?

[@4scoopz354]

@@512460 When you buy the valve cover it should come with the pcv

[@512460]

@@4scoopz354 okay thanks

[@gavintwilley7586]

4 Scoopz I have the a3 version and from basically reading online they say it’s the rubber piece and I got the hissing vacuum with the oil cap not being able to be pulled off.. you’re saying I need to change the valve cover too? Why’s that?