Voswitch JL300 Dash Switch Panel Install and Review

[@josephraineri8127]

I just ordered mine from Amazon arriving Tomorrow. It doesn't look like that bad to install. Thanks for this it was perfect timing.

[@CoddiwompleOverland]

It was not bad at all.

[@asdfjkl426]

This looks like a very good option. The build quality looks top notch and like you, I like the way the finished installation looks like it could have come from Jeep that way.

[@CoddiwompleOverland]

I agree

[@JayPitts-t1g]

Just installed mine today! next step hooking up the light..

[@CoddiwompleOverland]

We really like ours.

[@joshuakazfields4374]

Just did this kit and it’s a great cost effective option

[@CoddiwompleOverland]

Ours has worked well for us.

[@bennie873]

Thanks for the review! I am pondering what to do on mine. That looks good and seems simple enough to install

[@CoddiwompleOverland]

Has worked well for us with no issues.

[@GentleGiantFan]

Looks great! Wished there was something this clean looking for the JKs. I have the kind that bolts to the loop above the mirror.

[@CoddiwompleOverland]

I do too! We would be putting one in our orange jk

[@sportdriver]

I have a Voswitch in my JK. It works great.

[@CoddiwompleOverland]

Ours has been great also

[@GOE-MORC]

That looks good. Thanks for sharing.

[@CoddiwompleOverland]

Thanks for watching

[@dondavis5476]

Just what i was looking for! Thanks for sharing. Ordered today

[@CoddiwompleOverland]

Great! Glad it helped

[@gearlist]

Really clean setup, thanks for sharing 😎

[@CoddiwompleOverland]

Thanks!

[@mikeblaszczak5346]

I can't find the part where you went through the firewall. Also, is it possible to mount the controller on the passenger side, over the battery?

[@CoddiwompleOverland]

Sorry that we missed this. We ran the cable through the boot just below the master cylinder. The fuse box is designed to mount where we mounted it

[@jayhernandez6812]

By closing the fuse box all the way, trigger wire maybe get pinch cut.

[@CoddiwompleOverland]

Voswitch has a channel that the wires run through so they won't get pinched.

[@jayhernandez6812]

I am talking about the trigger wire that you put inside the fuse box, this will get pinch cut by closing the fuse box all the way.

[@clintdickerson1673]

Can you wire your winch into it? Should you? If so, how?

[@CoddiwompleOverland]

You could wire the main power in to it but I would not recommend using it for the operating it as you need to have a switch that stops the motion as soon as you release it for operation

[@SouthernComfortOutdoors]

How are y’all liking it after having it installed for a few weeks? Are the lights too bright on the panel at night?

[@CoddiwompleOverland]

It don't seem to be to bright and have had no issues. We like it.

[@SouthernComfortOutdoors]

@@CoddiwompleOverland awesome thanks!

[@CoddiwompleOverland]

Welcome

[@ssnova5255]

I run that panel in my Mojave.

[@CoddiwompleOverland]

We really like the look of it.

[@mikesters3532]

How did you get through the firewall with the wiring?

[@CoddiwompleOverland]

There is a rubber plug just under the master cylinder that I went through.

[@gerardobarajas8989]

Do you know what the draw on the battery is since you didn't connect the l thinner red wire to a fuse tap? I left mine unconnected as well for my JL800 but wondering if that may drain my battery. Thank you

[@CoddiwompleOverland]

I'm sorry, I don't know the power draw.

[@gerardobarajas8989]

@@CoddiwompleOverland no worries. How long have you had it plugged in that way?

[@CoddiwompleOverland]

About 3 months.

[@JT.MASTERFLEX]

What do u use for the dash mount ?

[@CoddiwompleOverland]

Standard go pro mount on our vector off road bar.

[@legomotion713]

Can you adjust the light level of the switches?

[@CoddiwompleOverland]

No you cannot. But when you add the labels, it dims them down

[@legomotion713]

@@CoddiwompleOverland That's good to know, thanks. If you were to press the power button for the backlights of the buttons, would the switches still remain active with the backlighting to them turned off?

[@CoddiwompleOverland]

They are only active when the lights are on.