Putting cylinder head on VW/Audi 1.8T engine

[@gplusgplus2286]

Dude you're a good mechanic but even good mechanics should read the service manual. You need to observe cam torque sequence and put silicone sealant beads in 6 spots under the valve cover gasket and also the half moon seal, otherwise you'll have oil leaks in less than a year. Theres also a special tool (cheap) to compress the cam chain tensioner..

[@briandavis55]

I could listen to this guy talk about building engines forever. Amazing stuff!

[@marcinpasnicki248]

You forgot to apply sealant in the corners under head cover.

[@laughingskullinc]

I bought my first project 944 on the hope your videos could give me hope for fixing it and I haven't been let down so far!

[@tracytillett]

You make it seem so easy! Lol for someone with mechanical knowledge you just boosted my confidence in being able to rebuild my engine myself with this series on this engine. My only concern is using the correct parts for what I want

[@tracytillett]

I would definitely say invest into a M12 screwdriver. Will save you tons of of times

[@GCS88]

Youre supposed to put sealant on the corners of the valve cover gasket

[@alejandrodibenedetto66]

Good Job, but you forgot to put the oil deflector. Are VVTs only for emissions purposes or do they give better performance?

[@ebutuoyebutouy]

Awesome. Thanks for sharing.

[@willi9226]

This is awesome and so informative, subscribed and liked! How has the loctite 574 been working out so far?

[@vusisibeko3900]

Its awesome i have learnd a lot thats usefull

[@jf8461]

I assume the #1 piston is at tdc, correct?

[@waviestbeatz2205]

I’m doing this job to my A4 1.8t , I’ve got the head back installed the cams to too dead centre . What do I do with the block do I put it too dead centre to and then install head? A bit confused a bit of help would be fab, great video and great video angles ! Gained a sub!

[@vsvenson]

Yes, make sure Cylinder 1 (and 4) is at TDC. The key way notch on the crank will be straight up.

[@williamfolk3099]

When the cams are on their alignment marks and the number 1 piston is at TDC. There will be no interference and this is when we can safely install the cylinder head on the block. So, we want to immediately get the timing belt on the crankshaft sprocket and the cam Sprocket timed up?

[@vsvenson]

Yes, that's right. With the cams at the alignment marks and the engine at TDC, there won't be any interference when you put it together, but make sure you put the belt on before you turn it over.

[@abdoumehdi6506]

Salut j’espère voir la prochaine étape

[@pescariaeputaria288]

Ótimas dicas obg ajudou muito

[@proreapertv1432]

So Hum is it suppose to turn

[@ervinhernandez3137]

very helpful , I have a mk2 gti and I am looking to swap 1.8t into it . how good is the 1.8t . is it better than the vr6 ??

[@vsvenson]

I don't have experience with the VR6, so I don't really know.

[@DimoS...]

Yeah buddy put 1.8 20vt with closed eyes! Is bulletproof with good services and true ecu tunne!

[@boostedfiveoh]

Hi just replace a cam seal on my 1.8t. When I put it back together I have the timing marks lined up on the crank and the cam. It runs like the timing is off. Do you think one of my cams could have moved when changing out the seals?

[@vsvenson]

Note that there are timing marks on the front and back of the gears (for a different application) - you might have put it on backwards, and now the timing is off.

[@wibmag]

An 8 valve 1.8T? I thought they all had 20 Valves...

[@vsvenson]

It's 20 valves - I think, in my brain, I was talking about the 8 exhaust valves.

[@wibmag]

No, it’s me that’s blind...i can now clearly see the three lobes (per cylinder) on the intake side,... This is truly a German engineering marvel...or nightmare😂😂😂 Great video, as always, thanks!

[@janekos919]

nice joobs

[@amerikanstafford]

++++++++++++