VW & Audi side facing to forward facing button shift knob conversion

You can buy the S-tronic knob here : www.rkxtech.com/products/audi...
You can buy the DSG knob here: www.rkxtech.com/collections/i...
10% OFF YOU ORDER IF YOU SUBSCRIBE JUST CONTACT US WITH YOUR USERNAME!

[@jhonnypina9463]

I bought the same shift knob from you guys and I followed all your instructions step by step, i made it work, it seems to be harder than it really is and looks awesome, thank you guys👏

[@WABIT1]

Man how can I start well first off thank you so much man I was able to do this because of your video I was scared and for a year I left my car with out a knob but thanks to your video I lost the fear and was able to do it. Thanks again man 🙏

[@TRAYHANKS]

thankyou so much i did mine the exact way an it worked i also did not have to use a new boot mine worked perfectly👍🏾

[@mrmanitoba]

I did this today and unclipped the leather boot only There was no need to take off the larger console piece. I used the original leather boot as the one from China had a different design.

[@fatalitya4623]

⁰0 de lk llllk

[@dennismokakabye7725]

You are a life saver. Thank you very much!!!

[@fl2o74]

Good job 😁👍👍👍

[@OneLeggedTarantula]

thanks! was just wondering if this could be done.

[@LauPNG]

Hello, can you just buy the plastic part that engages the gearbox? And just change from multitronic to s tronic?

[@audia6sline281]

Good Video. I just do the same on my Audi a6 4f Fl.

[@hlibivanov8190]

So how was it man? You done the work? I also have a6 4f and Just find video. Let me know please if you done it succesful. Thanks in advance

[@anasmashal4535]

How do you put ur old leather shift boot on the new shift knob?

[@dalmaximus]

It looked a bit stiff afterwards. Was it okay? Did it move as smoothly as the previous. And would a hairdryer be okay or do you suggest a heat gun? I take it the heat gun should be pointed at the lower part of the plastic where it sits in the metal part?

[@universe1498]

Use heatgun, it might snap with hairdryer

[@mben1072]

RKXD I have a 2012 Audi A7. I’m looking for a rs7 shifter conversion..... is it even possible to be done

[@eeiko321]

would this be easier on a B8.5 A4?

[@gabrielquni6258]

Does this also apply to an audi q7 4l

[@speedyvedo99]

Does the boot cover fit the same open space on most models or will there be gaps? 2011 Volkswagen CC

[@speedyvedo99]

And how would this work if there is a traction control button located on the cover

[@muckman5509]

Wouldn’t it be easier and stronger if you just cut it and araldite it back the way you want it ?

[@muckman5509]

What exactly are you using the heating for? Are you melting the plastic so you reform it to a 90 degree twist ? Or is there some kinda glue your releasing it from and just reseating it in position ? Why do you need to apply the heat ?

[@kylet3589]

The rod itself must melt and twist

[@ugurkarabulut8598]

My car pull trigger is not a plastic it is metal how should I turn it still same as plastic just heat the metal ?

[@Ayyoubduty]

is there any other method than this?

[@firefire5167]

Heh nice :)

[@abdullahakram4622]

as i was twisting the blue plastic it broke is there any way to fix that and if so where can i purchase the part

[@user-wl3lm2un5e]

Was you able to find the part?

[@kateymckinney7242]

Do you sell this with any other boot color?

[@roddyalameda5312]

those this mod work on a audi B7

[@kelbyt.8787]

How do you reset the latch kit if you accidently pressed the button

[@walidgourimate8642]

up please

[@jaynosowsky9708]

Just buy a black forest industries shift knob and call it a day..

[@philb707]

Man thats sketchy AF I want to do it but Im too terrified lol

[@ellfra2]

Any risk with turning the plastic mount?

[@R2S1987]

Ofcouse... if it breaks you's need to buy a new shiftercollum and that will set you back like 600 in parts...

[@KontoBielo]

how can i reset the button ? i pushed the button before the installation

[@walidgourimate8642]

up please

[@mateuszbojczuk2473]

How to reset latch?

[@mateuszmateusz8914]

I jak odblokowałeś to? Mam ten sam problem teraz

[@walidgourimate8642]

up please

[@hamzabaig4810]

kzbin.info/www/bejne/Zqi0pWZsYpKkhrM watch from 3:10

[@weldkhayoob2429]

Hello plzz for audi a3 2005 automatik plzzzz

[@rdlfpereira]

Not worth the risk IMO...

[@eeiko321]

Or can you buy that plastic part for the forward facing gear selector?

[@R2S1987]

As far as I could find on the interwebs its a piece connected to a big part that'll cost you big time. So don't fuck it up ;)

[@eeiko321]

R2S1987 do you have the part number handy?

[@eeiko321]

any chance you could provide the part number of what you found?

[@R2S1987]

No idea what partnumer... Google is your friend

[@eeiko321]

Yeah but how can you not be sure of what you mentioned you already found?? No, unfortunately, Google is not my friend or even an aquiantence... as I couldn't anything relating to that part, hence why I asked you... I didn't ask you for the sake of for fun you know?

[@RB-Engineer]

Does anyone know if there is direktly an adapter to buy, for having immediately a replacement plug and play :/ because if you destroy it you have a problem...

[@TRAYHANKS]

RB .....it looks harder than it really is trust me do it just like the video says just be careful with how close you hold your heat gun an turn slow.....i used a hair dryer once i got it where i wanted it to cool the plastic faster

[@nofaithjusthope8714]

Seems to be a pretty risky proposition just to have a round knob and a pretty mickey mouse way of doing it (heating that plastic rod and bending it can't be good for it weakening it) if it breaks you're screwed. Do it right or don't do it at all. I was wondering why some of these had different shift knobs and after research I found this how to video. Not worth it IMO

[@d2an3i]

instructions are fairly simple... no idea how u would be able to screw this one up

[@sth801lifestyle]

@@d2an3i do you know if these shift boxes are interchangeable between models? I have an Mk6 Jetta trying to put in an RS6 shift knob in it and I’ve replaced the shift box before with a used one off eBay, so I’m wondering if these shift boxes in your video or the ones in the Mk5 Jetta will fit in the Mk6 Jetta

[@danielpronenko4932]

Why u destroy the ring. U can turn it 1/4 and magic

[@kilerbvbv]

what do you mean? what ring ?

[@rajsandhu8156]

anyone out there can do the conversion for me? will pay

[@kirill6944]

Don't do it guys it's distracting the material my got broke after 2 years now I need to pay 500 to change all the part

[@denne45]

Thanks

[@mautosales2527]

Don't be a wannabe, get a manual instead.

[@lettuce6730]

Lmfao how is it a wannabe, my s3 came with this knob stock and I know some other ones come with that rectangular one, not every round shift knob indicates manual dumbass