VW Golf 7 comfort windows close via rain sensor activate regenSchließen komfort

[@qeliakut]

Hi! In golf mk7 2014 work's fine, but on golf mk7.5 facelift 2018 it is different! So do you know how to do it? Thanks for your help and video's 😎

[@18datex90]

Because it comes out written coding rejected error 31: request out of range?

[@andriesadrian696]

Hello i have Golf 7 2019 (7.5).....i made the same as you But Its not working.....do you know a solution for 7.5..? Thank you for all video 👍

[@enzo3209]

hi, thanks for your videos. Very useful. Do you have a video for mounting rain sensor and coding? (golf 7) I don't have a rain sensor, but I want to put it on. thank you

[@jemmace2586]

Hey I see everyone on KZbin has watched your rendition of di'agastino's in my mind. All I see and hear are people doing the same on all kinds of musical instruments. Another good video by the way, thanks very useful.

[@RedBoxPaqueteria]

Sunroof will not work, only windows. Do you know why?

[@radiator1979]

I did menage to enabne this function, it is ticked in car menu- auto close in rain, but when my windows are half -opened it doesn't work. When wide open (full) it works. Did I do sth wrong during coding? Or maybe there is sth to change in vcds? how do you check whether it works.?

[@martinhaluska9976]

hello, I did the same coding, option is enabled in the settings, but windows are not closing when car is locked and raining. any suggestion, please? Golf7, 2015

[@danilomodica2192]

Is possible to do it also on golf 7 with MIB 1?

[@gabrielk4120]

Hello is this possible on the Taos version with rain sensors?

[@eduardoaguirre1427]

Can you do this on the OBDEleven? If it is posible, con some one help me do it? Thanks :D

[@kamilpawlak9585]

Eduardo Aguirre I found such a coding for closing in the rain on the OBDEleven forum. using OBDeleven Go to [09] Central Electronics Go to Secuity Access and enter 31347 Go to adaptation channels and set the following: - (15) Access Control 2 - Regenschliessen_ein aus (Rain Closing on / off) - Select Active - (16) Access Control 2 - Regenschliessen_art (Rain closing Type) set to Permanent - (28) Access Control 2 - Menuesteuerung Regenschliessen (Menu Control Rain close) - Set to Active (enables the menu in the ifotainment screen) Go to [09] Central Electronics Rain and light sensor (could be RLS or RHLS subsystem) Byte 0 Enable: Bit 1 Regenlicht aktiv (rain light active) Bit 2 Regenschliessen aktiv (rain closing active) My Old coding…..00A8DD My New coding….06A8DD And you have to have the wipers in automatic position But it doesn’t work on some cars (different rain sensor?) and the menu function shows and is enabled. I did it myself and unfortunately it doesn't work either. My car is a Golf 7 from 2016. @golf Wagen maybe you have any idea? Do all windows have to be open?

Coding from 00A8DD to 04A8DD coding rejected... is my golf doesnt support windows closing on rain?

[@PeterMasarik]

The same with me.. error 31 coding rejected

[@dpmechanical]

Hi golf wagen... thanks for all your guide... can I ask you if are gli dire that this la ok for sensor RLHS? I have the same your sensor bit when I activate byte 0 bit 1 and 2 I have the code 06A8DD and not 04A8DD as your code... very thanks in Advance and congratulation too

[@dpmechanical]

Hi golf wagen... thanks for all your guide... can I ask you if are you Sure that this is ok for sensor RLHS?

[@golfwagen4173]

I forgot to check bit 1, in byte 0. it has to be tried, since it can always be returned to the original value

[@dpmechanical]

But this system in your car run perfectly with your RLHS?

[@caritaxd]

dp mechanical do you probe it in Rlhs?

[@dpmechanical]

I tryed in RLHS but not run

[@manolisarcho6689]

Your sensor its only for rain or its rain-light-humidity sensor? Do you know? I want the code from the sensor please

[@yunuskozpinar]

it seems like RLHs

[@santi_vag_escaneos]

My sensor front olny have 2 points, not 4 points. Not possible?

[@notify00]

he dont alow me to tick the box..

[@gianry]

Hi, my original binary coding for Byte0 is : 1001 0000 . as I haven't VCDS but OBDeleven(without bit description) could you tell me the meaning of my coding ? thanks. I've RLHS sensor product code " A"

[@vwejjr]

Witam. Czy rozwiązałeś problem?

[@PATRIKMATO]

golfWagen nakodoval som to podľa tvojho videa ikona automatickeho uzatvorenia okna pri daždi pribudla na panely aj je zakliknuta,zakliknute mam aj všetky okna a aj napriek tomu nechce mi to fungovať golf 7 2015 čo mož sposobovať že to nefunguje

[@martinhaluska9976]

ja mam ten isty problem. podarilo sa to dako poriesit?

[@vwejjr]

Witam. Macie rozwiązanie?

[@ferrets6]

Fake! I got the same RLHS sensor, did the same coding and obviously it doesn't work. To make it work you need RLFS sensor, not the RLHS one.

[@Backby-CZ]

The F vs H is German vs English; Rain Light Humidity Sensor / Regen-Licht-Feuchtesensor check bit 1, in byte 0.

[@dawid_p89]

I have a problem. When i click Rain Closing active and I have error 31, request out od range... :/

[@at0ny]

Then it cannot be coded... got many golf 7 with this error after coding RLHS of RLFS sensor.

[@seal777ful]

Thank you

[@ooiiiiiiliuiji]

Very good video

[@ooiiiiiiliuiji]

How do jou daylight on of ? Ik wil no permanent daylight? Please help..

[@golfwagen4173]

hi ---- kzbin.info/www/bejne/noWVgoCnmtWVodU

[@hallaise73]

hello, I did the same coding, option is enabled in the settings, but windows are not closing when car is locked and raining. any suggestion, please? Golf7, 2015 (copied frome another user, but i have same problem)

[@svetoslavdimitrov85]

i have the same problem, the option appear on the menu, but doesn't work

[@vwejjr]

Witam. Czy udało się aktywować?