vw mk7 cam solenoid issue (part 2)

  Рет қаралды 8,583

Tasos Moschatos

Tasos Moschatos

Күн бұрын

Пікірлер: 15
@ivanvega2821
@ivanvega2821 2 ай бұрын
I’m currently having a misfire in cylinder 3 on my 2015 Passat with the 1.8T. Took the cam magnet out and notice it wasn’t moving freely like it should. Would a cam magnet and or oil solenoid cause a misfire in only one cylinder with no other codes related? Compression is 180psi and good leak down on cylinder.
@glasser2819
@glasser2819 5 жыл бұрын
old vs new part: what is the difference with the loose internal part ??
@james6386123
@james6386123 3 жыл бұрын
I am having a loud shaking diesel noise with slight misfire when accelerating. No codes would this be my problem?
@zacharymarchewka6413
@zacharymarchewka6413 2 жыл бұрын
Did you ever figure this out? Mine is doing it.
@Sixthpanic
@Sixthpanic 2 жыл бұрын
I had 2 "good" Solenoids I replaced them and switched them twice, I couldn't figure out what the hell was going on with my car p0011 audi a5. I bought a new solenoid and boom code gone. The smallest damage to these things will cause them in not function. Sometimes you can't notice them sticking and not working out of the car.
@TylerHuff-c7w
@TylerHuff-c7w 10 ай бұрын
Hey bro I have a 2011 a5 it keeps popping the solenoid, I have good oil pressure and my timing was done like last week, I used a “known “ good one should I just bite the bullet and get a new one ?
@nkolobagardner2233
@nkolobagardner2233 4 жыл бұрын
Hi mine was doing the same sound and I changed the solenoid on the intake 4 months ago, the sound was gone now is making same sound again
@xBoostx97
@xBoostx97 5 жыл бұрын
hello,can you please help me , how much torque did you use for the solenoid?
@MohamedEL-Mohamed
@MohamedEL-Mohamed 5 ай бұрын
50NM
@sailorbob74133
@sailorbob74133 3 жыл бұрын
I see you have the P0164D code there. Was the engine showing below spec oil pressure only at warm idle? I've got almost the exact same list of codes. Plus my Intake Cam Phase is at +11.73 and my Intake Cam Adjustment is at 38* degrees.
@A.u.d.i.
@A.u.d.i. 3 жыл бұрын
Hi, do you need to lock the engine before undoing them? Is there any chance tho mess up a timing? Thanks
@quallzone6219
@quallzone6219 3 жыл бұрын
No, you do not need to lock the engine. Replacing the camshaft adjuster magnet and VVT solenoid (aka oil control valve) does Not mess up timing.
@Adrianperformancequattro
@Adrianperformancequattro 4 жыл бұрын
Sound very loud like tdi
@bigbird2100
@bigbird2100 5 жыл бұрын
Sounds like my TDI Audi .
@abe7907
@abe7907 2 жыл бұрын
Does this issue has to bring up a code ? Or is it possible that this solenoid can be bad without a code
vw mk7 cam solenoid issue (part 1)
8:34
Tasos Moschatos
Рет қаралды 19 М.
VW Audi 1.4 1.8 2.0 TSI P0011 Camshaft code diagnosis and repair - try this first!
9:07
СИНИЙ ИНЕЙ УЖЕ ВЫШЕЛ!❄️
01:01
DO$HIK
Рет қаралды 3,3 МЛН
So Cute 🥰 who is better?
00:15
dednahype
Рет қаралды 19 МЛН
Bad VVT Solenoid Symptoms: 7 Common Failure Signs
3:10
Honest Mechanic Colorado
Рет қаралды 322 М.
Is this a New Common MK7 Engine Issue?
9:37
Deutsche Auto Parts
Рет қаралды 439 М.
Bad Camshaft Position Sensor Symptoms - How to Test and FIX!!
8:07
fixing  mk7 GTI cam adjuster faults
13:27
carwerks101
Рет қаралды 21 М.
GTI Runs Rough Timing Issue Cam Crank Correlation P0016
17:51
deamonmachine
Рет қаралды 18 М.