VW Raido Mib 200 682 Replace the touch screen

[@grajay155]

Easy enough to replace the digitiser screen by sticking it on top of the old one. The whole thing fits in the frame without any dramas and the old ribbon connector can be taped out of the way.

[@viper42x]

If you don't have bubbles between the digitizer and the screen, this definitely works. But if you have bubbles in between like I have, you need to separate the old digitizer from the screen.

[@dragosso8730]

What substance do you use to remove the old glue?

[@tomball84]

How do you get the screen to stay on the heater while you use the cutting wire? When I try it moves all over the place.

[@martinsubally899]

Hello friend! I want to ask you politely where can I buy such heating pad? Best regards friend.

[@golfopeos]

Hello Is possible to send screen to you for digitizer replacement? From France Best regards

[@xbxia5625]

Yes, you can mail it to me for repair, a French friend also mailed it to me last month, you need to mail it to China at your own expense, and then after the repair, you pay $80, and I will send it back to you using standard shipping

[@golfopeos]

@@xbxia5625 Great I like to send it to you But how to contact you by email ?

[@xbxia5625]

@@golfopeos [e-mail]

[@sofianemeryoul8128]

Why 🤔 you not put the final work

[@xbxia5625]

For the rest of the operation, you can choose to stick the new touch screen with double-sided tape according to your equipment conditions, or use the original process and use oca for lamination. Using oca lamination requires professional vacuum equipment to remove the bubbles generated by oca

[@sofianemeryoul8128]

@@xbxia5625 It means that there is There are two ways to repair the screen, and there are two types of touch screen ?

[@xbxia5625]

@@sofianemeryoul8128 In fact, there are three maintenance methods. The first one is when your screen is in good condition, as long as the touch screen is not damaged or bubbles are generated inside, you only need to wipe the old touch screen clean and stick the purchased new touch screen directly on the old one. On the touch screen of the old touch screen, the purpose of maintenance can be achieved by removing the cable of the old touch screen from the motherboard and connecting it to the cable of the new touch screen. Of course, this is the lowest cost and lowest risk, but it may not be the best way. , It is recommended to use this method for customers who generally have no maintenance ability. The use effect of this method is acceptable if the customer's requirements are not high. If the customer has higher requirements for the display effect, it needs to be like the one in the video. Remove the old touch screen first, after you remove the old touch screen and clean the glue, you still have two options, the first is that the touch screen we sell will have double-sided tape around the back, you can choose to directly Use double-sided tape to attach to the LCD, this method is common on early years car radios, this display will be better than the first one above, but if you have removed the old touchscreen, It is usually recommended that you use oca glue to re-fit the new touch screen and LCD to achieve the original effect, because the biggest difficulty in repairing the screen is to separate the old touch screen. If the operation is improper, the entire LCD will be damaged, but Lamination requires professional vacuum equipment for defoaming, otherwise there will be a large number of air bubbles between the LCD and the touch screen, which will not achieve the desired maintenance effect, so re-fitting is the most difficult, risky and costly, but the effect is also the most. OK