VW T4 tie rod/track rod end and steering rack inner joint replacement made easy!
Пікірлер: 30
@haskyb91842 жыл бұрын
Really helpful and useful. Joel, I sometimes watch your videos before my van breaks so I can prepare myself for the grazed knuckles and misery 😂
@davidbecker7667 Жыл бұрын
Thank you. You showed how to do this job perfectly.. You are a great teacher. You showed everything that needed to be told to do this job. You demystified ( simplified ) all those words for parts and where they are fitted to the vehicle. You have given me the confidence to do it myself. you made it look so simple. I can see physically it can be tough to undo some bolts and remove the rack by the wheel. I will buy that tool to separate that. You are fantastic and will save me a lot of money. More importantly. When you do the job yourself. It does wonders for your self esteem and confidence. Thanks for sharing that.. Good luck to you. Regards Dave
@JoelsStuff Жыл бұрын
Thank you for the kind words Dave. Best of luck!
@loicr41712 жыл бұрын
Awesome mate, Thanks a lot . Glad we can see difficulty on your video instead of others. At least I know what I'll be struggling with ;) Cheers !
@jamiejones30013 жыл бұрын
Brilliant video just what I was looking for
@JeffJ243 жыл бұрын
good improvisation with the file as a lever
@JoelsStuff3 жыл бұрын
it was a bit of old fence but I could have used the file :)
@JeffJ243 жыл бұрын
haha yea the file still there, i would say it would of been good to see you try something rather than use the ball splitter, never seen or heard of one before
@JoelsStuff3 жыл бұрын
I don’t think I could have managed without the splitter. It was only £10, so an essential purchase for this job I reckon!
@mariusml2 жыл бұрын
Super video. Used it to Great success!
@qa99142 жыл бұрын
Brilliant job, top man 👍🏼
@gorankovac85223 жыл бұрын
Tnx man - just what i need cheers man tnx
@Paratath3 жыл бұрын
I should get a ball joint splitter. Without it you can do the job by jacking the track rod end up and out but it takes incredible force to pop it. It usually takes me hours to get them out!
@JoelsStuff3 жыл бұрын
It still took me 20 mins with the splitter. What a pain!
@nathanwilson720010 ай бұрын
You can wedge the ball joint up from underneath with a little pressure and hit the arm it connects to downwards with a hammer
@johno78083 жыл бұрын
Good video! 👍
@JPL2007DK2 жыл бұрын
Same for me thanks
@cjay1262 Жыл бұрын
Hardest part of this job was getting the inner boot back onto the rack. I ended up having to snip the boot.
@Corkasaurus3 жыл бұрын
After you Jack the car up and put the stand in. Are you using that Jack or is it just there for a safety?
@JoelsStuff3 жыл бұрын
I make sure the stand is securely holding the weight, and I leave the jack there as a backup. I also slide the wheel under the low point of the engine as a backup
@patriciabutler6863 Жыл бұрын
Do you have to grease the ball joint before reassembling ??
@JoelsStuff Жыл бұрын
Nope
@dampcurtain3 жыл бұрын
Ive got an advisory for Front steering linkage ball joint. Are they talking about the track rod ends or something else?
@JoelsStuff3 жыл бұрын
It sounds like it’s the same as on this video, but I would double check. How exactly is the advisory worded?
@captaincoxyboy3 жыл бұрын
Track rod ends I’d say as the rubber splits, the grease dries up and ends wear out, advisory on mine too, going to try and do them this weekend
@dampcurtain3 жыл бұрын
@@JoelsStuff thanks for getting back to me. Its worded as follows: Front Steering linkage ball joint has slight play os and ns ineer
@JoelsStuff3 жыл бұрын
Yep it’s the same job as in this video. It’s as easy as it looks, and cheap to buy the parts. Good luck!
@dampcurtain3 жыл бұрын
@@JoelsStuff If I buy the parts can you if them ; ) I dont have the tools sadly.