WALL MOUNTED PRESSURE WASHER SYSTEM UPDATE 6 MONTHS

[@HawaiiDetailing]

Here is a comprehensive guide to building your own wall mounted pressure washer kit with every part and piece to the whole setup with a detailed diagram. www.hawaiidetailing.com/wallmountedpressurewasher Here is a link if you want to see the original video. kzbin.info/www/bejne/i3fInGRqr6mljNk

[@srikarkumar2740]

How many car's we can wash in a day with this machine ?

[@HawaiiDetailing]

@@srikarkumar2740 I have no idea. It will run all day long but be aware that these machine have a shorter life expectancy than a commercial unit and when it fails there is no replacement parts to fix it. It is very inexpensive so that the trade off. I used mine for a year now pretty hard. Just know that if you are running a business than a commercial unit like a Kranzle is the preferred unit. Thanks for watching

[@srikarkumar2740]

Thank you sir 😊 love from India

[@HawaiiDetailing]

@@srikarkumar2740 thanks a lot.

[@johnsall6274]

Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use kzbin.infoUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.

[@HawaiiDetailing]

Yeah. I eventually swapped it for a kranny. I did really like this machine when I was using it.

[@Sn-tk8rq]

This is quite the system. I like how clean and professional looking it is. The painted Karcher unit tops it off. Perfection. Well done!

[@HawaiiDetailing]

Thanks a lot.

[@joevanseeters2873]

Absolutely love that pressure washer set up you have. Love the organization of it, colors of it, etc. It's the perfect set up. You show that even on a budget, weekend warriors and enthusiasts can have a great set up in their garage and like you said, "have a high end user experience", for not a ton of money. You see a ton of videos on the high end stuff and everybody drools over it, yet not many people can afford it. With your system, I personally think it LOOKS better than most of those high end systems and I would be thrilled to have just the convenience of it in my garage. I think most people getting into detailing more seriously could afford this set up which is great. I also love what you did with your vacuum, modifying it for a wall mount system like those higher end vacuums, but again, for the budget minded person who wants the EXPERIENCE of the high end garages, you give great options here. Thanks for posting. I really enjoy your videos and your enthusiasm......YEAH!!!!!!!!!!!!!!!

[@HawaiiDetailing]

Thanks a lot. You accurately summed up the whole reason I started this channel. I really enjoy sharing ways for people to confidently use products and tools that offer the same high end user experience as the pros at a price point that they can afford. I am always happy to hear that viewers are building great setups in their garage and having fun detailing. I like to show that anyone can do it. Thanks for watching and always participating with the channel. I appreciate it.

[@rickv5004]

custom hose length looks very well integrated

[@HawaiiDetailing]

It’s a great kit. Thanks.

[@Engineerboy100]

Great video! I think I'll do a similar set up for my wife in the back yard for cleaning the windows, furniture and patio. Thanks for posting.

[@HawaiiDetailing]

Great set up.

[@imdustyjames]

I'm enjoying the intro production quality improvement, can't wait to see how you top it next time. ( the videos just get better every time)

[@HawaiiDetailing]

Thanks a lot. Glad you like them.

[@robbienyc3102]

Awesome,,,this is what us men enjoy ,,toys ,tools etc....We live in a country that a set up like this is pennies considering the quality. if car care is one's passion, why use inferior products if just for a little bit more money you can enjoy quality. You're better off buying once and justifying your prices when customers see what you're working with...your set up is cool, even if it's for non-business purposes it shows where your self-esteem is at....I'm a new subscriber and I enjoy seeing people take their craft to the next level....peace.

[@HawaiiDetailing]

Thanks a lot. Appreciate the comment. Means a lot.

[@leeleew7524]

Love the setup. The most important part of this is having a spigot inside the garage, don't see that much where I live but of it doesn't freeze there!

[@HawaiiDetailing]

Good point. There are a lot of things to consider if you live in an area with freezing conditions and no heated garage. It would require winterizing this entire kit and proper storage of products etc. Thanks for that point.

[@alejandroolivas3476]

What a joy it is work with a perfect set up like that, makes everything easier. Congrats man! Very nice job!

[@HawaiiDetailing]

Thanks a lot. I appreciate it

[@machninety7334]

Man I really dig this setup. I think if you had a self retracting hose reel, like one you pull til it clicks, then pull again and it retracts itself, could save you so much time every time you use the hose reel.

[@HawaiiDetailing]

Thanks.

[@TheCarDetailingChannel]

The K1700/1800/1900/2000 pressure washers are awesome. You can't go wrong for the money, especially when they come with a 3 year warranty.

[@HawaiiDetailing]

Mine has served me well. Thanks for watching.

[@J1Z06]

That is a seriously sweet set-up. Everything in there is so neat and professional.

[@HawaiiDetailing]

Thanks I appreciate your compliments. Having it set up the way I want it makes for a great workspace. Thanks for watching.

[@thehuntergroupRealEstate]

i just need to build mine ! thank you for all the links in the description ! 👌

[@HawaiiDetailing]

Thanks for watching and supporting the channel.

[@richardelpedes4313]

This is exactly how I pictured my setup to be, thank you. If/when the guy that creates the 90 degree outlet opens up to creating more, I would like to know as well!

[@HawaiiDetailing]

Thanks. I reached out to him to see if he is interested in making the jumper hoses. Will let you know if and when it happens.

[@Torchninja]

designing my wall mounted p.w. system exactly like yours. great stuff.. thx

[@HawaiiDetailing]

Very cool! Thanks for watching. Let me know if you have any questions

[@MannyC711]

So cool! You’re the man!!

[@HawaiiDetailing]

Thanks

[@030604lill]

Obsessed Garage just released their own entry level low PSI, high GPM pressure washer. I believe it's around $200. It's called Active. P.S. Nice to see another Hawaii braddah into the proper PW equipment and accessories. Not too many people here are familiar with brands like Kranzle, MTM, Mosmatic, etc.

[@HawaiiDetailing]

Yeah man. Thanks. I did see that unit. My next step after I use this one up will be the Kranzle. Thanks for watching the channel. I appreciate it.

[@makatv8792]

I like that you have music going now

[@HawaiiDetailing]

Thanks

[@JackRR15]

I gotta say I prefer commentary over broll

[@HawaiiDetailing]

@@JackRR15 yeah. I am not changing how I do it. Just playing with a few intro type shots to show the products or situation that the video is about. Thanks for watching all the vids. I appreciate it.

[@JackRR15]

@@HawaiiDetailing Okok np I'll still watch it anyways haha!

[@JacobGnarly]

I love this setup but Tim the Tool man Taylor would definitely say it needs more power!

[@MrMr123]

Throw some quarter turn shut off valves for the water supplies.... NICE setup man

[@HawaiiDetailing]

Thanks

[@jmo6722]

Great video and it inspired me to do a similar setup, just don’t get why you would spend $120 on a pressure washer and $500 on a reel. I just did a nice metal hose holder with a no kink hose and it works great.

[@HawaiiDetailing]

My plan all along was to get the pressure washer I have now. I wanted all top of the line components and planned to upgrade the PW in the future. I kept the Karcher for a year and now switched to the Kranzle. Check out that vid of me upgrading. Thanks for watching

[@thomaslahr9022]

Have you noticed whether the PW could vibrate itself off the shelf? I have the same one. Great idea to paint the yellow cover. I did the same thing with Plastidip.

[@HawaiiDetailing]

I have not had mine vibrate and move. Another install I did we put small fitted rubber mat under it and it is quiet and does not move at all.

[@salaquino]

been reading that if not a commercial system adding a longer hose and/or thicker hose like a 3/8" can add strain to your pump long term. Are you or others having problems with this model using a 100' 3/8" hose

[@HawaiiDetailing]

I used this rig for over a year with no problems. I used it a lot. I highly recommended it. It’s a great starter unit for the detail enthusiast and even works well when used every day. Keep in mind thought that these 100 dollar range machines have a much shorter life span than the $700-$1000 commercial pressure washers. That life varies based on use and care of equipment. Check out my new setup in my video list. It’s a commercial unit. It’s the way to go if you want many years of service out of it in a commercial setting.

[@stebesplace]

Great update! I have about the same setup, but my next upgrade is the hose reel. I know that’ll be a game changer.

[@HawaiiDetailing]

Yeah the hose reel is a nice component. Its lifetime quality. Makes me happy to use it too. Guess that’s the most important thing. The vacuum hose reel is a great reel too. If you have not seen that vid of mine check it out. Thanks for watching.

[@victorgarcia1749]

Thank you so much for making this U tube videos !! Like to see how you installed quick disconnects on your outlet hose and on the the jumper hose on your karcher wall mount !! Thanks again

[@HawaiiDetailing]

Thanks for watching. What is it that you want to see? It shows me putting a system together in this vid. kzbin.info/www/bejne/eJisiXyoe7prfJI

[@gary9879]

Thank you so much!

[@HawaiiDetailing]

Anytime

[@stevenhall1095]

Your video is very helpful. One question. Mostly I will be washing my vehicles. But one a year I would want to clean my driveway. Will this unit do the job?

[@HawaiiDetailing]

A driveway would be a big ask for a small pressure washer especially if it’s a large area. Could it do it yes. Is it the right tool I would say no. Hope that helps. Thanks for watching

[@jasonwhite9040]

Great setup. I'm curious about incorporating a hot water pressure into my setup. From what I see, stepping up to hot water is a big step - both physically and financially. Have you seen anything that would work with this type of setup? Or am I missing something when I'm thinking I need hotwater to wash properly. Thanks in advance for any feedback you want to share. Cheers

[@HawaiiDetailing]

I don’t think you need it unless it’s very cold where you live than hot water would be a great idea. There are machines that are designed for hot water but they get pricey. You could run tap water that is hot as long as it’s not too hot. There should be specs to support the hottest temp that can be used somewhere. I live in Hawaii so I just don’t need it. Thanks for watching

[@gary9879]

Any progress on talking to your friend about making the jumper hose? I have the same set up thanks to you, but now need the jumper hose. Yours looks so good! I also have a narrow spot where I mounted my Karcher and a standard 3’ MTM hose will just stick out to far unless a use your set up. Where did you get the 90 degree elbow? How did you match your Kobrajet hose in such a small length? Worse case scenario, I would just maybe use the 90 degree elbow and fit it to the MTM jumper hose? Please let me know and thank you for all your help.

[@HawaiiDetailing]

I have been in touch with him and he is not interested in making them to sell at this time. I will continue to try to make it happen and when I do I will let everyone know. I updated the description with a solution that should be pretty slick for you. A new jumper hose and fitting. Check it out and let me know what you think.

[@gary9879]

Watched most of your videos on this and still not seeing a link to the 90 degree elbow that’s hooked up to your jumper hose. I am just going to order the MTM black jumper in 2 or 3 ft length but want to bring it down in front of the machine so it’s not sticking out into garage as my garage is very narrow. Not sure of the length as MTM suggests going extra 6” to 12” for the bend.Thanks again!

[@HawaiiDetailing]

@@gary9879 here is an alternative to the custom hose I had built. Should be the same outcome only without the custom color hose. Here is the link that I added to the description. 90 degree stainless fitting (optional to make a lower profile fit) amzn.to/3dWEbPw Hope that helps.

[@barryG0529]

I have a very similar set up , thank you for your video. My only issue is with the karcher vibrating off the stainless steel shelf . Lol. Do you or any followers have a simple solution ? Thank You

[@HawaiiDetailing]

Rubber nonslip drawer liner cut to size. Thanks for watching

[@nicudetailer4352]

Nice set up!

[@HawaiiDetailing]

Thanks a lot.

[@SharkBaitR56]

Set up is so clean. Is your buddy still making those 2 feet hoses I can get from you?

[@HawaiiDetailing]

Thanks. I wasn’t able to set that up sorry.

[@jaymz9097]

Aww yeah! 😂 love your vids man 💯

[@HawaiiDetailing]

Thanks is a lot. I appreciate it. Thanks for watching

[@angrydan0266]

I don't suppose anyone has managed to find a work around for using this in the UK? Its obviously a 120V pressure washer and in the UK we use 230V mains. I understand you can get devices to step up/down power but as the washer has a 13 Amp draw it would mean a MASSIVE convertor to deal with at least 1560 Watts. Any help with making this work in the UK would be really helpful and appreciated as this machine is only available in the US. Thanks.

[@mattday8730]

Where did you get stainless shelves for you’re cleaning supplies on walls

[@HawaiiDetailing]

a.co/7jFjrWQ Thanks for wathing

[@49siao]

The type of user review I have been looking for!!!!!!!!! Every other video provides too little explanation or just a sales pitch!

[@HawaiiDetailing]

Thanks and glad you liked it. Thanks for watching

[@kmsbaking558]

We were going to have an electric pressure washer installed in our barn but the quote was very expensive. I came across your video and I think we want to do something similar. We have the walls studded so we want to make sure that the plumbing is done correctly as well as electrical. I am wondering if your set up is for hot water as well? If not, would it work for that? We can have it plumbed out directly from our On Demand hot water tank.

[@HawaiiDetailing]

Check out this vid. kzbin.info/www/bejne/iWiWfJmOiNyHlZY I go deeper into the setup and layout of everything. Let me know if you still have any questions. Depending on the temp of the water you will need a hot water specific pressure washer. Thanks for watching

[@gary9879]

Like your set up and thanks for all your info. Working on mine now but can’t figure how the garden hose will mount to the power washer with SS quick connectors. I got the the garden hose male threads meeting the male threads from the side water inlet on pressure washer. What am I missing? I got the high pressure outlet figured out with the m22 14mm to my jumper hose. It’s like I need a m22 to the water inlet, but threads don’t fit...I would need ght threads, then I can just put coupler on end of garden hose to connect to M22....thx

[@HawaiiDetailing]

The Karcher comes with a pipe thread to Garden hose connection. I used that supplied pipe thread to GH fitting and connected the MTM garden hose quick disconnect to it. Hope that helps.

[@gary9879]

@@HawaiiDetailing Just went thru my box and found the bag that had that fitting in it. Feel so stupid! It fell out and was in the empty box that it came in. You saved me big time...thank you so much for helping me out! I wasted hours trying to figure out what fitting I would of needed. Thank you again! Your help and response is awesome!!!!

[@HawaiiDetailing]

@@gary9879 no problem. Glad it worked out.

[@gary9879]

Any chance of your friend making me one of those custom 18” whip hose also? Like how you used the gray Kobrajet hose to match. I’m in the process of mounting my Karcher cube to the wall and got your same ss shelf. Approximately how high is your shelf? My Cox reel is on back order and want to at least mount the shelf. About how high is your reel mount? Just anxious to get this installed. Appreciate all your help.

[@infotime]

What about the lower flow rate? I currently have a gas pressure washer that is 2200 PSI and 2.2 GPM. I don't like the hassle of dragging it out, setting it up, supplying gas and oil, etc. A setup like yours looks awesome. I know I probably don't need the pressure I've got, but I worry that the lower flow rate would be a let down. What do you think?

[@HawaiiDetailing]

The Karcher is a great entry level pressure washer with about a 1.3 gpm. There are higher flow rate electric pressure washers out there but they are a lot more money. I am very happy with my setup but it does have less flow rate than what you are used to. In the future I plan to get a high end unit but this Karcher is working so well it is hard to justify spending 10x on a better one. My thought is if you want to switch to a wall mounted unit with a reel but want to keep the cost down and still have a great user experience than this kit is it. Upgrading down the road is always an option and you would be fully set up to do it. If money is not a problem and you want a commercial style rig than go with the Kranzle option I have in the description and don’t look back. Either way you will be happy. I have a gas pressure washer that sits in the corner unused since I built this rig. I use it for cleaning the driveway and that’s about it. Hope that helps. Let me know if you have any other questions. Thanks for watching the channel.

[@kenstudios]

Another great video. I have another question: What kind of and where did you get the 90 degree elbow fitting that attaches the pressure hose output?

[@HawaiiDetailing]

I had it custom made. Thanks

[@Somnology666]

what is the depth of the shelf? My wall space is pretty shallow from the garage door edge

[@timdrabik6113]

Jeremy. Bought the Karcher. Bought the MTM Kobrajet Washing Hose, which I’ll attach to the OG Mosmatic Spray Gun. I’m not going to mount the Karcher. I’m going to simply connect a garden hose to the Karcher for now. Question, do I need an MTM jumper hose to connect the Kobrajet Hose to the Karcher? Or, would I only need a jumper hose if I put the Kobrajet hose on a coxreel portable caddy reel, connecting jumper hose to the coxreel & connecting kobrajet hose to coxreel? Thanks for the help!

[@HawaiiDetailing]

Hope this helps. Minus what you already have. I do have a full list, part for part, in the right order in the description if you want to look at that too. Here is what you need if you don't use a Coxreel 3/8 Male plug that connects to the Karcher bit.ly/2UmpQRf 2X 3/8” Female Stainless Quick Disconnect Coupler (1 for the Karcher and 1 for the sprayer) bit.ly/35h4NWO MTM Hydro Kobrajet 100-Foot (3/8") 4000 PSI Non-Marking Hose bit.ly/3nhwjJF MTM Hydro Kobrajet (GRAY) 100-Foot (3/8) 4000 PSI Non Marking Hose amzn.to/2VxXMi8 Complete OG Spec Mosmatic Swiveling Sprayer & Wand Solution bit.ly/2GSxoZ6 If you use a coxreel than you will need these parts M22 (14mm) Female to 3/8" Stainless Plug bit.ly/2UmpQRf (Depending on the distance from your shelf to the hose reel use a 2' or 3' jumper hose accordingly) 3' Jumper Hose 3/8” bit.ly/38wP8ok 2' Jumper Hose 3/8 amzn.to/3r3UGgd Cox Hand Crank Hose Reel (With Stainless Steel Swivel) bit.ly/3pjrhy7 Cox Hand Crank Hose Reel (Brass swivel) amzn.to/3ob4TFJ MTM Hydro Kobrajet 100-Foot (3/8") 4000 PSI Non-Marking Hose bit.ly/3nhwjJF MTM Hydro Kobrajet (GRAY) 100-Foot (3/8) 4000 PSI Non Marking Hose amzn.to/2VxXMi8 2X 3/8” Female Stainless Quick Disconnect Coupler (1 for the Karcher and 1 for the sprayer) bit.ly/35h4NWO Complete OG Spec Mosmatic Swiveling Sprayer & Wand Solution bit.ly/2GSxoZ6

[@timdrabik6113]

@@HawaiiDetailing Thanks. So I have the Karcher K1700 Cube, the MTM Hydro 29.0011 Kobrajet 3/8 gray pressure hose 75 feet, OG Mosmatic SwivelSprayer and the Mosmatic Nozzle Assembly 40 b 3.0. Per the link and your reply, I’ve ordered, coxreel caddy Mount hose reel, model #112-3-100-CM 3/8, M22 Female 14mm to 3/8 plug, 3 foot jumper hose and 2 3/8 female QD couplers. I think I have everything, yes? Now, I just need to figure out how to assemble all of it / make it work. Want to come to WNY and due a road video? Ha ha. Please let me know if I have everything. Yaps always, thanks for all of the help!

[@HawaiiDetailing]

@@timdrabik6113 that sounds like all you need. Should all go together nicely.

[@timdrabik6113]

@@HawaiiDetailing you the man! Thanks again…

[@timdrabik6113]

@@HawaiiDetailing LAST QUESTION. Ha ha. I think I understand / figured out how to connect this setup. If I didn’t want to connect the Karcher directly to a garden hose, using the supplied adapter w/ the Karcher annd instead wanted to mirror your setup connecting the Karcher to your hose bib using the Stainless Steel Braided Inlet Hose, I would need MTM Garden Hose 3/4 Female disconnect coupler at the end of that braided hose, connected to a MTM Grden Hose 3/4 Male Disconnect coupler, which would connect directly to the Karcher, correct?

[@rubenharris9241]

Great videos….thank you. I noticed that you haven’t featured a DI water system yet. Do you have a different way of managing this?

[@HawaiiDetailing]

I plan to get one real soon. Thanks for watching

[@Sistopha]

Can you post the links ti the shelves for your chemicals

[@HawaiiDetailing]

www.amazon.com/shop/hawaiitesladetailing?listId=3QNHS3YBPEVIR&ref=inf_list_own_hawaiitesladetailing They go in and out of stock. Thanks for watching and supporting the channel

[@cadillacshak5600]

Where did you get the stainless shelves for your bottles? Thanks. Love the videos

[@HawaiiDetailing]

www.amazon.com/shop/hawaiitesladetailing?listId=3QNHS3YBPEVIR&ref=idea_share_inf Thanks for watching

[@jessefig5281]

Is a nozzle available to slow the flow down enough to water plants too? Looking to have this serve double duty. Thanks

[@HawaiiDetailing]

No. It is going to be high pressure no matter what. The range that can be adjusted is pretty small.

[@jeffreyrobert9460]

I’m surprised you don’t have a better pressure washer

[@HawaiiDetailing]

kzbin.info/www/bejne/iWiWfJmOiNyHlZY You don’t like this one?

[@RidersUnited]

What would you say was total cost of this system at the end?

[@HawaiiDetailing]

I would guess about 1k give or take. It been a while since I purchased it. You can look in the description and drop all the items in a cart and get a for sure price. Thanks for watching

[@KingRockets]

Do you ever use an extension wand lance when washing vehicles or just the regular spray gun?

[@HawaiiDetailing]

Not to often. Thanks for watching

[@Anganggeeshi]

Like your shirt! Are you in living Waialua / haleiwa area?

[@qwikss4469]

Awesome! What size bolts did you use to mount the Cox reel?

[@HawaiiDetailing]

2” lags

[@mle8603]

Did you need to secure the K1700 to your shelf? Does it vibrate enough to walk itself off the ledge by chance? Also, the included Karcher garden house adapter to the inlet looks kind of flimsy. Is there a direct quick disconnect we can use instead? Or do we absolutely need to use the adapter?

[@HawaiiDetailing]

Some have used a anti slip mat under the machine to avoid movement. Mine sits still as is because of the hose and plug. The fitting on the Karcher is a funky size so I just used the supplied adapter and it’s been fine since the install. You could probably find a better fitting I just never tried because the one that comes with it seems descent. Thanks for watching

[@josshvr1421]

A question, how do you remove the yellow cover on the front? Thanks.

[@HawaiiDetailing]

Just have to find the hidden screws. they are all there just hard to find.

[@Lynch84]

Did you install the wingnuts on the Cox reel? Mine came with rivets.

[@HawaiiDetailing]

Yes. I put them on during the installation of the reel so that I could take the reel off when I was mounting it to the wall.

[@Lynch84]

@@HawaiiDetailing nice. I thought about doing that. But didn’t have any small bolts

[@HawaiiDetailing]

@@Lynch84 yeah. Made taking it apart easy.

[@tristanluc7008]

How did you secure the power washer to the shelf

[@HawaiiDetailing]

@@tristanluc7008 I did not. You can use a rubber mat like a drawer liner.

[@Mike_Spina]

this is exactly what i want to do

[@HawaiiDetailing]

I like my setup. Make using the pressure washer fun. Thanks for watching.

[@Hunter__14]

Awesome video brotha how do u tune it to 1000 psi. Im thinking of getting thst washer

[@HawaiiDetailing]

The orifice size in the gun is how you can play with the output. I have links to everything you need in the description. Thanks

[@willdamian1066]

Do you have a water softener system at your home?

[@HawaiiDetailing]

No. I do want to get one soon.

[@timdrabik6113]

Jeremy. Waiting on my Cox hose reel. Pretty much good to go. Can’t thank you enough for your videos & help. One issue / question, I need a hose, preferably stainless, preferably braided, to attach to my garden hose bib, that will attach to my Karcher 1700 cube, the one you have in the links won’t connect. Can you tell me what I need & whether I need an attachment/coupler?

[@HawaiiDetailing]

The Braided hoses are all NPT plumbing threads. Here is a way to make it work. I use it as my wall mounted bucket filler. SS 3/4 FGH x 3/4 MNPT amzn.to/3nqLcZR 24” Stainless Steel Braided Hose amzn.to/39lpf9U SS 3/4 GH to 3/4 MNPT amzn.to/38srBVd

[@timdrabik6113]

@@HawaiiDetailing Jeremy howZit! So, washed my model 3 using your setup. Wow! Car looks brand new. Can’t thank you & your channel enough. One question, I’ve got some water leaking from my setup; from dryer hose connected to the Karcher, from the kobrajet hose attached to the Karcher & from the hose attached to the OG Mosmatic spray gun. Is that b/c I need to tighten the couplers etc w / a wrench?

[@HawaiiDetailing]

@@timdrabik6113 yes they need to to tightened for sure. Use about 5-7 wraps of Teflon tape and tighten to a sensible torque where it’s plenty tight but not a crazy amount that will damage the threads. Be sure to secure the other side with a wrench while you tighten it so it does not put a strain on any components. That should fix up any leaks.

[@timdrabik6113]

Jeremy. HowZit. Detailing my Model3 & loving it, believing it or not, thanks to your channel. Need some help cleaning up my setup. Do you have an email address so I can send you a photo of the 2 issues I’m having? Thanks

[@HawaiiDetailing]

@@timdrabik6113 [e-mail] Let’s see what you have.

[@chrisheath3385]

How did you mount the cube to the shelf? I assume it will just vibrate off if not secured. Thanks!

[@HawaiiDetailing]

You can use a non skid mat like for a drawer cut to size

[@chrisheath3385]

@@HawaiiDetailing I love that idea. Appreciate the reply. 🤙

[@Rais1959]

Very nice informative video. At what height the pressure washer is installed?

[@HawaiiDetailing]

I will measure it but I recommend putting it at a height that is comfortable for the user. That varies greatly. I just stood in front of the wall and made a decision based on comfort. Thanks for watching

[@Rais1959]

Thanks for your response and appreciate it. Look forward for more informative video's. All the best and take care.

[@hugotovar7505]

Very nice setup! Have you tried vibration isolation pads underneath the Karcher? Might help with the sound transfer. i.e Air Compressor pads

[@HawaiiDetailing]

I have not. Its pretty quiet as is. I have a new set coming soon so stay tuned. Thanks for watching

[@jasonb8081]

Is the pressure washer attached to shelf? What size orifice do you have on sprayer?

[@HawaiiDetailing]

Check the description I have all the parts and pieces all labeled in there. I did not bolt it down. It sits still but another install I did we put anti skid rubber pad under it. Worked great.

[@jasonb8081]

@@HawaiiDetailing ok thank you

[@JasonRaneses]

Love your setup. Where can I find the Karcher in the grey color you’re rocking? Have only seen that model in green.

[@HawaiiDetailing]

I painted it. They only come in yellow.

[@JasonRaneses]

Plasti Dip I presume? Well worth it for the look.

[@jasonlastname2583]

Great video. How did you lower the PSI on the karcher

[@HawaiiDetailing]

Thanks for watching. You need the right spray nozzle orifice for your unit. If it’s a Karcher I have a link in the description

[@jasonlastname2583]

Thank you!

[@davidcrowder1965]

I have that PW and nearly identical garage space limitations. I’m concerned that a 90 degree elbow would put too much of a burden on the PW’s pump and motor. Did you consider that? Also, how easy was it to remove the cover for painting?

[@HawaiiDetailing]

I did consider it and have not noticed any pressure drop or sound from the motor indicating that it is struggling. It sounds and operates exactly the same as before. The cover was easy to remove. There are a few screws and it will pop right off. Thanks for watching.

[@CareChoiceChiro]

How did you secure the Karcher pressure washer to the shelf? Doesn’t it move with vibration?

[@HawaiiDetailing]

Mine just sits there with no problem. An install that I did we used a small rubber mat under it although it was not needed.

[@pcgjr47]

Which fitting allows you to connect upgraded 3/8 pressure washer hose to the front of the unit?

[@HawaiiDetailing]

The links to the exact parts are in the description. Thanks for watching

[@navdaman4431]

hello friend question, how did you tune down the psi on the pressure washer to 1000 psi?

[@HawaiiDetailing]

With the nozzle. In the description I have a link for it. Check it out.

[@04sti20]

Hey could you tell me what fitting is used to connect the inlet on the pressure washer to the hose? Is it that m22 fitting?

[@HawaiiDetailing]

It is. I have a link in the description to the exact one that fits my system. There are a few different sizes. Thanks for watching

[@numbr3t]

Is your shelf the 12x24 rounded edge? Thanks!

[@HawaiiDetailing]

The link in the description is the exact one I have. 12x24 Rounded edge version. There are some flimsier versions out there so be careful.

[@numbr3t]

@@HawaiiDetailing awesome, thank you. I just wanted to double check because I clicked the link at one point and it gave me the option to choose a size. I wanted to make sure it was the right size! Love your videos and ideas. I’ll be painting the yellow face plate too. Nice touch. Thanks!

[@HawaiiDetailing]

@@numbr3t thanks a lot. It’s a great little setup. You will like it. Send a pic when you get it done. I would like to see it.

[@greghowdeshell]

Where did you get your metal shelves for the washer and your liquids?

[@HawaiiDetailing]

They are in and out of stock depending on the day. www.amazon.com/shop/hawaiitesladetailing?listId=3QNHS3YBPEVIR&ref=idea_share_inf

[@JAVIER-rh7iq]

What is the length of the hose connecting the reel to the pressure washer?

[@HawaiiDetailing]

The 2’ makes a nice C loop and the 3’ folds like an S under the shelf. I use the 3 but my other install where I did the vac and pressure washer on a piece of plywood on the wall I used a 2. Both work well.

[@kauaigrown]

Howzit! Is that thing wrapped? All I see is the florescent yellow color available. 🤙🏼

[@HawaiiDetailing]

Na. I painted it In my first pressure washer vid. Popped the plastic off and spray painted. Thanks for watching

[@patricklambinicio4937]

Love the set up bro. In the process of putting my station together. Working on final touches. Hope did you remove front cover on the Karcher to paint it? Appreciated some guidance. Keep up the great videos!

[@HawaiiDetailing]

Thanks a lot. My original pressure washer video covers a little bit of the painting. I did take the cover off.

[@patricklambinicio4937]

@@HawaiiDetailing Thank you, was hoping you could show how to remove the front cover and soap container. Thanks!

[@DrippinWetDetail]

Really love your videos and setups. They have cost me a lot of money! 😂. Was wondering how you went about getting the water hookup in your garage? My hose is a good 30ft away on another part of the house. Thanks!

[@HawaiiDetailing]

I plumbed a water line to the PW. Glad you enjoy the vids. Thanks for watching and supporting the channel.

[@teriquegomes1]

Does the 100 foot hose affect performance?

[@HawaiiDetailing]

No not at all. Thanks for watching

[@xSnakeEyes86]

is that warm or cold water coming from the wall?

[@HawaiiDetailing]

Cold

[@kbesner]

Sorry if you already addressed this, but how do you 'tune down' the pressure washer?? Thx!

[@HawaiiDetailing]

The orifice in the spray tip. It allows more or less water through affecting the outcome of the pressure. Different size for different machines.

[@kbesner]

@@HawaiiDetailing Thx!

[@waynebeck7801]

Does the power washer ever overheat?

[@HawaiiDetailing]

I have never had it overheat. Keep in mind that this is an home owner / enthusiast level pressure washer pump. If you are running an 8 hr a day operation I would consider a commercial model. Thanks for watching.

[@JuanFlores-xb9sy]

Hey man love the videos got my karcher because of you , quick question will the regular plastic mtm nozzles in 3.0 Orifice achieve the 1000 psi?

[@HawaiiDetailing]

I am not sure. That would require some testing. Thanks for watching

[@excerritosresident]

What dimensions is your shelf. The one that pressure washer sits on? Also where did you purchase other shelves off to side that are on your wall.

[@HawaiiDetailing]

Here is the links to the shelves.12x24 www.amazon.com/shop/hawaiitesladetailing?listId=3QNHS3YBPEVIR&ref=idea_share_inf

[@excerritosresident]

I opened both links for cox reel. Can you give me that model number so I can contact cox reel direct. Much appreciated

[@excerritosresident]

I forgot to mention when I opened links reel is not available

[@HawaiiDetailing]

@@excerritosresident Yeah sorry its a popular item that goes out of stock fast. Check back on amazon or pre order from OG to get it. OG says 3-4 weeks from today. There just are none available as my link is direct from the coxreels amazon store. Thanks for supporting the channel

[@excerritosresident]

@@HawaiiDetailing could you send me close up pictures of pressure washer and all fittings to my email. Just want to see how everything is connected. A visual would be of great help to me. I just about have everything I hope, just waiting on plumber. [e-mail]

[@alexvelez2141]

DI water for your setup?

[@HawaiiDetailing]

No. I don’t have it.

[@jeremiahserrano6538]

Great content! Love your channel. I have a question in reference to the high pressure output thread size on the kercher k1700 what size is it? I’m stumped with the jumper hose.

[@HawaiiDetailing]

In the description look at the M22 3/8 plug and the jumper hose. That’s what I have on mine. All the parts are in the order that they are on the machine. Thanks for watching and let me know if you have any other questions

[@anthony3953]

How do you tweak the psi on pressure washer I would like to do the same for mine

[@HawaiiDetailing]

By changing the size of the orifice with a new nozzle.

[@anthony3953]

@@HawaiiDetailing changing the orrifice on the wand? If so do you have any specific videos showing how to?

[@HawaiiDetailing]

@@anthony3953 when you buy a nozzle (ex. 40 degree tip) you choose the size of the orifice. You pick the orifice that matches your goals with pressure and volume of water. For my setup I use a 40 degree nozzle and a 3.0 orifice. There is a link in the description for this nozzle. Open it and look at the choices you have when purchasing. Do you have a Karcher? If not each model has a different size that would correct the pressure to 1000 psi. I am only familiar with my setup when it comes to this calculation.

[@anthony3953]

@@HawaiiDetailing looking into it and had no idea Matt from OG sold this! Thanks for the very informative responses

[@Americanboy5150]

did you paint the washer? i cant find a grey one

[@HawaiiDetailing]

I did paint it.

[@axelortizpadua6915]

where do you buy de coxreel? and what model it is.

[@HawaiiDetailing]

The links are in the description. Check it out and if you have any questions let me know. Thanks for watching

[@23BEAR23]

How do you tune the karcher cubes psi down?

[@HawaiiDetailing]

By changing the orifice size on the spray nozzle.

[@23BEAR23]

@@HawaiiDetailing nothing has to be changed on the actual machine internally?

[@HawaiiDetailing]

No the machine does not need to be changed. The pressure Vs. Gallons Per Minute is all corrected within the nozzle. Here is the nozzle I use: bit.ly/3nziSok I use this nozzle with a 3.0 orifice and that will produce 1.4 Gallons Per Minute @ 1000 PSI. This is a great nozzle and well worth the money. I highly recommend this setup and use it exclusively.

[@23BEAR23]

@@HawaiiDetailing by any chance do you know what numbers it produces with a 4.0 orifice?

[@23BEAR23]

@@HawaiiDetailing thank you for your help as well brotha

[@lucasneves4357]

I already purchase the cox reel 1/2 but my hose is 1/4 what kind adapter o should used on it ?

[@HawaiiDetailing]

Not sure what you have. Did you get the ones in the description?

[@srikarkumar2740]

Hi sir how many cars we can wash continuously ? Please help

[@HawaiiDetailing]

I am sorry I don't understand the question. Thanks for watching My thoughts are if you are running a commercial business than I would consider a commercial grade pressure washer. This is a great unit but not designed for constant daily use. I have used mine for a year pretty hard and have had no problems. But keep in mind it’s an entry level consumer grade product. Thanks for watching hope that helps.

[@cayman412]

How did you attach your pressure water hose to the cox reel because I have kobra jet 75 foot hose and everytime I try to attach it i can't make it work and the hose gets kinked up and won't even fit in the reel.

[@HawaiiDetailing]

Look in this vid I go over that. kzbin.info/www/bejne/eJisiXyoe7prfJI

[@cayman412]

@@HawaiiDetailing ok, thank you!

[@KaiserConsultingLLC]

Just found your channel today, already subscribed. You have great content, much appreciated! I would really love to see you do a comparison of the Mosmatic High Pressure Sprayer to the Kärcher Easy!Force Advance Trigger Gun (under the Professional Accessories). I have been looking for a way to connect this Kärcher gun to my Kärcher K5.

[@HawaiiDetailing]

Thanks for watching and for the suggestion. I will definitely take look into that gun.

[@benkneisley3001]

How did you “tune” it down to 1000psi ?

[@HawaiiDetailing]

With the proper nozzle. I have a link for the one I use for the Karcher in the description. Thanks for watching

[@FarmerTan89]

What hose is that on the reel?

[@HawaiiDetailing]

Thanks for watching. I put a link the the description so you can check it out.

[@FarmerTan89]

@@HawaiiDetailing I caught that, but it only links to blue. How did you get gray? Thanks again! I love your set up

[@numbr3t]

I clicked the link for the hose and it went to a blue hose. I’d prefer the gray one. Any insight on that? Thanks! I love the setup and will be mimicking this same thing!

[@HawaiiDetailing]

​@@FarmerTan89 Unfortunately I could only find gray available in 75' at this time. The reel can hold up to 100' and that is what I have. 75' will work great but will be a little shorter. I added a link to the 75' gray hose to the description if you want to see it. Thanks for watching.

[@HawaiiDetailing]

​@@numbr3t ​ Unfortunately I could only find gray available in 75' at this time. The reel can hold up to 100' and that is what I have. 75' will work great but will be a little shorter. I added a link to the 75' gray hose to the description if you want to see it. Thanks for watching.

[@patricklambinicio4937]

Has anyone tried to remove the front cover and soap container? If so, can you share how it was done? Thanks!

[@HawaiiDetailing]

There are several screws that are easy to find. Unscrew them and the faceplate will need to be unsnapped from the front. You can also remove the soap container as well. I folded and zip tied the hose for the soap container and tucked it away. Paint faceplate and replace. Hope that helps you get it done.

[@edgardocabrera163]

Hello sir where can i buy that kind of setup

[@HawaiiDetailing]

The links to everything are in the description. Thanks

[@antnope3042]

How do you feel about the sg35

[@HawaiiDetailing]

It’s a good middle grade sprayer. I like it. Thanks for watching

[@saleh-sn2ez]

I bought karcher k2 but the pressure hose is short for the car and it's turns in circular motion, what do you recommend?

[@HawaiiDetailing]

I am a huge fan of the wall mounted hose reel but if that’s not in the cards I would recommend the MTM hose in the description. It kink resistant and really high quality. Thanks for watching and commenting.

[@hosrow]

How did you dial the washer to 1000psi?

[@HawaiiDetailing]

Orifice size. Links in the description