DIY WALL MOUNTED PRESSURE WASHER & VACUUM SETUP. CUSTOM DETAIL GARAGE BUILD

[@HawaiiDetailing]

Here is a comprehensive guide to building your own wall mounted pressure washer kit with every part and piece to the whole setup with a detailed diagram. www.hawaiidetailing.com/wallmountedpressurewasher Check out my other pressure washer video. kzbin.info/www/bejne/i3fInGRqr6mljNk

[@cuts2thebone]

What wrench did you use to connect the kobra jet hose to the cox reel?

[@marcelahurtado4100]

Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use kzbin.infoUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.

[@HawaiiDetailing]

Thanks. It’s a good one.

[@31acruz]

I think taking the time to paint items that clash with the colors in a garage is time well spent. Makes everything peaceful and blend well together.

[@HawaiiDetailing]

i agree thanks

[@channingrhodes6756]

Great job on the install! I like the racking system. It gives it a more professional look and gives the owner options later if he wants to add something.

[@HawaiiDetailing]

Thanks. The owner really enjoys that kit. Been going strong ever since.

[@mnovo]

Stumbled upon this as I happen to have the same pressure washer. For those wanting to drop their psi... look at your nozzle. It should have the orfice size stamped on it. Ie: 40025 which is 40 degree and orfice 025. To drop the psi to around 1000, you need 40030. If you have more than one wand, you might be in luck!

[@Bullybeef972]

Wow, love it! All it needs now is the deionized water system. Thanks!

[@HawaiiDetailing]

Thanks. Glad you enjoyed the video

[@fpskywalker]

Great project. On attaching the equipment to the plywood, T-Nuts may have worked better as they end up flushed instead of a washer and nut protruding out the back requiring a little extra work to make clearance for them.

[@HawaiiDetailing]

Yea I agree thanks for watching and the suggestion. Next time I will definitely look at some low clearance bolts for sure.

[@iglopez63D]

T-nuts? I'm going to try to do the same set up

[@fpskywalker]

@@iglopez63D yeah they have these prongs that dig into the wood and end up flush. Once you see them, it will make sense. Amazon has some sizes.

[@jaa02130]

Love the setup and the racking system owner installed. Great work and video saved for a future garage project.

[@HawaiiDetailing]

Glad it helped! Thanks for watching

[@ryanclark5052]

After racket system, awesome setup

[@quijada1545]

Your set up rocks bro. No wonder others want to duplicate it. The racking system is ok but I don't love it. I can see things getting in the way in such a tight corner. Thanks for the content. Keep it coming!! 👍

[@HawaiiDetailing]

Thanks a lot. I appreciate it. Thanks for watching

[@KikoGeeh]

looks good after installing the rack system.. great work

[@HawaiiDetailing]

Thanks 👍

[@Rad1oD3mon]

I love this setup and want to do it in my garage. I can see the benefit of the racking system so I like it afterwards. Plus it blends the plywood panel in better so you REALLY don't even know it's there

[@HawaiiDetailing]

Yea I agree. Thanks for watching

[@Brian.RollTide]

Definitely after. Looks for customized and clean.

[@HawaiiDetailing]

Thanks for sharing.

[@harsimran1]

That rack is a great and beautiful addition.

[@HawaiiDetailing]

Thanks. Thanks for watching too.

[@imdustyjames]

the racking system was a nice extra touch at the end

[@HawaiiDetailing]

Thanks for commenting.

[@Zeron18]

I used the swivel side of the hose for barrel of the reel. It makes life so much easier. There's no need for a swivel end to the gun since I can always install a swivel joint. Then again, I opted for the sgs28 and never looked back.

[@HawaiiDetailing]

Good idea. Thanks

[@YTkush]

Obsessed Garage got you too....me too bud, exact setup at home.

[@HawaiiDetailing]

Hahaha. Great little set up. Thanks for watching

[@peekaaboo_8082]

Aloha Braddah!! Love your channel ❤ and Thank you for all your Aloha!

[@HawaiiDetailing]

Aloha. Thanks I appreciate it

[@keishawn]

No idea how I got here, or why I would need this setup. But I'll be doing this over the summer, quality content my guy!

[@HawaiiDetailing]

Thanks a lot. I appreciate it. Thanks for watching

[@MrNmd9009]

That's bad ass! Inspiration tomorrow I'm going to home depot!

[@HawaiiDetailing]

Yeah. Do it.

[@MrNmd9009]

@@HawaiiDetailing already done my guy. Came out fantastic

[@HawaiiDetailing]

@@MrNmd9009 great to hear.

[@darinking1343]

I love the setup, but the Vac on top of the cabinet, gets to be a problem when you need to dump it, especially for those who might be a little shorter, etc. Generally I think it's better to keep the dirty stuff closer to ground level.

[@HawaiiDetailing]

That’s an option also. This was a friends system I installed and he wanted it on top of the cabinet. Thanks for watching

[@annagraham6204]

Good point. I’d still take this set up. Pretty bad ass.

[@skyserf]

@@HawaiiDetailingDo you know what kind of cabinet that is?

[@RFlynn618]

Nice job. What about the nuts and bolts on the backside of the plywood?…How were you able to land that on the wall with the bolts sticking thru??

[@rlstrad2059]

Sweet, and the racking system is right too, need it for the cleaning supplies to maintain that sanitary look.

[@HawaiiDetailing]

Thanks a lot. I appreciate it. Thanks for watching

[@brianmilner9837]

like the music you put in the video, nicely finished/polished

[@HawaiiDetailing]

Thanks for watching. I appreciate it.

[@yougenpillay5428]

Thank You For This Video. I'm gonna do a identical setup in my garage

[@HawaiiDetailing]

You will like it. It’s a great little setup. Makes washing the car fun. Thanks for watching

[@kanaletumlinson]

Awesome setup! Thanks for sharing I like the racking system so I can hang all my cleaning goodies auurriittteee 🤙🏽

[@HawaiiDetailing]

Yeah. Was a fun project. Thanks

[@nexamax]

Excellent step-by-step set-up...and it looks fantastic...!!! I Love the drywall mud and repainting the Karcher and Rigid faces to match... EXCELLENT attention to detail. The pre-planning with board layout is also a fabulous way to make things work. Very well thought out, now I need to stop typing and start doing...! ;-)

[@HawaiiDetailing]

Yeah for sure. You can do it. If you have any questions let me know. Thanks for watching

[@NQTrader10]

@@HawaiiDetailing What paint did you use on the Karcher and Rigid?

[@mikesilveira8114]

@@HawaiiDetailing yeah what plastic paint and also how did you deal with the bolts from the reels against the sheetrock wall?

[@palco22]

Awesome.....it's ready to go !

[@HawaiiDetailing]

Thanks for watching. Yeah it all ready anytime you need it.

[@terrylarry1932]

Great Job!! Racking system works great if you can use shelves to place detail cleaners etc on them

[@HawaiiDetailing]

Thanks for commenting. Yeah that his plan.

[@jackww839]

You are the man! Love everything!

[@HawaiiDetailing]

Thanks a lot.

[@ronbeeman357]

Nice setup

[@HawaiiDetailing]

Thanks

[@jerryedwards2359]

Great job all the way around

[@HawaiiDetailing]

Thank you. I appreciate it thanks for watching.

[@joekegg]

Nice clean install. With Slatwall looks better and obviously has more utility. Getting mine together.

[@HawaiiDetailing]

Thanks. Keep me posted. I would like to see the results. If you have any questions feel free to ask.

[@sreethampan]

Excellent job

[@HawaiiDetailing]

Thanks for watching

[@donschultz7759]

Dang I wish I lived near you. Definately could have you do my setup for my pressure washer

[@HawaiiDetailing]

Yeah man. Just do it your self. Easy. Thanks for watching

[@donschultz7759]

@@HawaiiDetailing thanks sir. Yeah I'm having issues with my McKillians stubby spray gun leaking right now. But eventually someday I will make that awesome setup.

[@Tores316]

Here’s my question?? When mounting the reels to the plywood, I noticed you didn’t mention the length of the lag bolts used? Were they not sticking out the backside of the plywood? How did you mount the plywood flush to the drywall?

[@HawaiiDetailing]

Use something like these amzn.to/3Vb1NW1

[@gregwayne6785]

Well done! Some great ideas. I like it with the racking system. Would actually put panels on top for a more finished look.

[@HawaiiDetailing]

Glad you like it. Yeah good idea. Thanks for commenting.

[@usi9fl]

Nice job, very neat. I do like the racking system.

[@HawaiiDetailing]

Thanks alot. Glad you liked it.

[@apostolisapostolos2254]

Great work

[@HawaiiDetailing]

Thanks for watching

[@Gixxer915]

What was done with the mounting hardware on the back side of the plywood? I figured it would stick out and get in the way when mounting to the wall

[@HawaiiDetailing]

You can slightly countersink and use carriage bolts.

[@Rubibi-saltwaterjim]

Aloha from Australia, unfortunately we can't get that model karcher in Oz for some weird reason, maybe they won't make it in 240V. Does it vibrate the house a lot? We have a steel framed home and I don't want it to wake up the whole house. I'd put it on some kind of rubber matting to dampen it.

[@HawaiiDetailing]

I suggest putting a rubber mat under it. That’s a great way to keep it isolated from the shelf. Thanks for watching

[@jasonpaul8223]

That little rigid vac has enough to pull through all that hose?

[@HawaiiDetailing]

Yeah. Has full suction believe it or not. Works great. The install in my garage video and the interior detail video shows it in action.

[@No_life_haha]

Clean setup!!!

[@HawaiiDetailing]

Thanks. Was a fun install. Still going strong and they love the rig.

[@BlairWarnock]

Great video. I just got my Cox reel in the mail for my pressure washer hose. What size were the bolts you used to mount it? 1/4” diameter?

[@nestorchoto4930]

Que bonito trabajo. Muy profesional. Gracias trataré de hacer lo mismo.

[@HawaiiDetailing]

Thanks for watching

[@kervinarnold5664]

Nice work I want one

[@HawaiiDetailing]

Yeah. Good kit for sure.

[@stilleysmobiledetailing1696]

i agree with joe van Seeters, man neat and clean is the way to go, however i do like jeremys stainless shelves in his garage with his go to products right there grabable, im a fan of these rack systems but i think these are misplaced, however my opinion may change if i was able to see whats going on in the rest of the garage area. this guys rack placement may just be his best option , i dunno.. hey, still looks sweet though, way better than my current garage setup.

[@sandro2304]

This looks awesome!

[@HawaiiDetailing]

Yeah it a cool setup for sure. Thanks for watching

[@sandro2304]

@@HawaiiDetailing Hi Jeremy, I am doing a similar setup. Where did you get the elbow? Do you have a link?

[@HawaiiDetailing]

@@sandro2304 yes the links are in the description. Thanks for watching and supporting the channel.

[@J1Z06]

That is one sweet set up! love this channel!

[@HawaiiDetailing]

Thanks a lot. I appreciate it

[@J1Z06]

@@HawaiiDetailing Keep up the great work. Enjoy the weekend.

[@HawaiiDetailing]

@@J1Z06 thanks. You too.

[@justinmurphy2227]

@jay dobbins you're so right! I'm doing a very similar setup at my home. I was on the fence about what pressure washer to buy.....nope....not anymore!

[@basharsalim2201]

Wow love the set up I wish there are some ppl can do the set up here in ca

[@HawaiiDetailing]

Thanks a lot and thanks for watching.

[@joshcosta423]

It's easy enough for you to do yourself.

[@colinwithey1906]

This is awesome really love it come by mine sometime and do one for me so impressed

[@HawaiiDetailing]

Hahaha. Thanks and Thanks for watching

[@jesusbaez4427]

Awesome setup i so need this done in my garage

[@HawaiiDetailing]

Yeah it really changes the experience of working in the garage. Makes it fun for sure. Thanks for watching and commenting. If you have any questions just let me know.

[@AntLive29]

i like it . do you have a general idea of the cost to have plumber and electrician come out?

[@HawaiiDetailing]

It will vary dramatically based on your site location and also how far away electric and water sources are from the location you want to install.

[@okkin981]

Could you have used Lag Bolts instead? Will that have worked instead of the Nut/Bolt Combo?

[@HawaiiDetailing]

You could but I feel more comfortable with the bolts and washes to make sure it will not loosen up with time. Into studs lagbolts are great. Plywwood not so much. Thanks for watching

[@okkin981]

Thank you but maybe carriage bolts so they suck in more to the back of the plywood? Think that would be ok? Also, what paint color is your Garage Wall Color for your garage? What Gray is that?

[@HawaiiDetailing]

@@okkin981 I agree with the carriage bolts. I will get back to you on the grey color if I can find the can I used. I may have tossed the leftovers already. Thanks for watching

[@JAVIER-rh7iq]

How were you able to mount the whole setup to the wall with the bolts for the reels on the way in the back of the board?

[@HawaiiDetailing]

You can either counter sink the nuts on the back of the plywood (be careful to leave enough meat so that it is securely connected) or drill wholes larger than the nuts into the drywall so that it can sit flush (recommended). This Plywood mounting method only makes sense when you do not want to do major in wall structure changes and drywall work. This vid shows the install without the plywood. kzbin.info/www/bejne/i3fInGRqr6mljNk Thanks for watching

[@sw3int867]

Great job man!

[@HawaiiDetailing]

Thank you! Thanks for watching

[@MrAmonts]

Dude, awesome set up, thanks for sharing step by step. Ever consider installing a sink in the garage? Would be amazing to see it.

[@HawaiiDetailing]

I have. When I redo my cabinets I may put one in. Thanks for watching the channel

[@kentdavis4446]

Could I use this pressure washer for mobile detailing? Need something better then my gas unit and trying to go electric

[@kylecorrow702]

Homedepot sells a good electric pressure washer for less than $150

[@kentdavis4446]

@@kylecorrow702 one from ryobi?

[@kylecorrow702]

@@kentdavis4446 yea sorry I couldn't think of the name. But yea you can't beat it especially for the price

[@HawaiiDetailing]

This is a good buy for the Karcher. Its a entry level machine and works really well with a few upgrades. Check out my other pressure washer vids to get a better idea of the machine.Thanks for watching

[@kentdavis4446]

@@kylecorrow702 I'll check it out, but I don't want to take something back to home depot all the time lol

[@briangallant5973]

Great job!

[@HawaiiDetailing]

Thanks for watching

[@briangallant5973]

I enjoy seeing a “professional” job done in all aspects. The plumbing, electrical, paint, drywall, all of it. Exactly the way I would want it done.

[@HawaiiDetailing]

@@briangallant5973 thanks a lot. I enjoy the work and like to do things right.

[@lanceballew2304]

Very nice👍🏻

[@HawaiiDetailing]

Thanks

[@patram4880]

Where did you get those nice shelves to hold all your bottles that’s nice real nice please advise thank you

[@HawaiiDetailing]

Here are some links to my garage items. Thanks for watching and supporting the channel. www.amazon.com/shop/hawaiitesladetailing?listId=3QNHS3YBPEVIR&ref=idea_share_inf

[@alexkellum1]

Sick setup!

[@HawaiiDetailing]

Thanks a lot. Thanks for watching

[@ggabtheBlessedOne]

Nice! Bless up!

[@franklomeli5479]

nice set up! what size plywood did you use for this

[@HawaiiDetailing]

3/4"

[@chelo3510]

What was the size of the board? Also the screws holding down the water hose are kinda small, will they be able to hold that weight over time?

[@HawaiiDetailing]

Start with a 4x8 sheet. Fit is based on your area and layout the parts on the ground to get it right. After that Cut board to the size that works. We used large carriage bots on the reel. It’s been on the wall ever since with regular use and no issues. Hope that helps.

[@chelo3510]

@@HawaiiDetailing yes very helpful, thank you!

[@twoalphasix4332]

Dude this is awesome. I have the same Karcher Unit and I've been wanting to do this for a while

[@HawaiiDetailing]

Makes using your machines so much better. User experience is drastically improved. Go for it and start building it. If you have any questions feel free to ask. Thanks for watching

[@nissanmagana]

Where did you get the adapter from the rigid to the vacuum reel?

[@HawaiiDetailing]

Here you go. Thanks for watching and supporting the channel. amzn.to/3kKGQf0

[@nissanmagana]

@@HawaiiDetailing thanks

[@michaelsa892]

I like the racking system that’s an awesome set up what does something like that run price wise

[@HawaiiDetailing]

Probably about 1200 or so. I would have to add it up to know for sure. Thanks for watching

[@batwitdaba2057]

Great info. Planning goes a long way in an efficient install. I've seen a video in which two guys fudged up a custom Kranzle wall install, taking several days to complete! At least the video was a good laugh. BTW, why do you prefer to use fender washers? The coxreel manual doesn't specify the type of washer. I just used ones that were slightly larger than the hex head of the bolt. Thanks.

[@HawaiiDetailing]

It’s overkill. As long as it does not pull through you are good. Thanks for watching the channel

[@swaveyymike]

Was there a gap between the wall and the mounting setup since it had nuts on the back for the reels ?

[@HawaiiDetailing]

Use this type of bolt to minimize and gap. amzn.to/3n46tP8

[@swaveyymike]

@@HawaiiDetailing thank you 👍🏽

[@bobfredericks6545]

Great job. Gives me some ideas for my setup. I like the finished product with the racking system.

[@HawaiiDetailing]

Thanks. I think it turned out nice. He is very happy and uses it all the time.

[@ChrisCaballero]

Looks amazing! Simple yet effective 👌

[@HawaiiDetailing]

Thanks a lot. Thanks for watching

[@antoniohardy5981]

Great job

[@HawaiiDetailing]

Thanks a lot and thanks for watching.

[@mbk-Por911]

Looks great.

[@HawaiiDetailing]

Thanks for watching

[@joshcosta423]

Another tip would be to use wood, captive nuts from the backside so you don't have the bolts/nuts hanging off the back. Only reason I'd suggest that is to prefab like you did but on a wall without the open drywall.

[@HawaiiDetailing]

Yes I agree. The project started with no open drywall and when the build was almost complete my friend decided to run plumbing and electrical. If you saw my system. I blocked in prior to drywall and was more of a custom finish. Thanks for watching and commenting.

[@stevetami1]

Just hung a Cox vacuum reel. Where did you find a 90° that fits right?

[@HawaiiDetailing]

The link is in the description. thanks

[@stevetami1]

@@HawaiiDetailing thanks. I looked before commenting. Musta missed it. Great work btw

[@Ozzfest760]

Did you have to cut out part of the drywall for clearance between the back of the wood and the bolts/nuts protruding out the back? (shown at the 2:12) Trying to figure out how it would sit flush with those sticking out the back. Thanks for your input!!

[@HawaiiDetailing]

You can either countersink the bolts into the wood or in this case we notched the drywall as it already was all chopped up to install the plumbing and electrical. The downside to countersinking the wood is there is less structural integrity that way. The ideal install method is how I did my personal setup with blocking behind the drywall. Check out that vid also. thanks for watching.

[@kimstockdale632]

Use T-nuts (look on Amzn) and you can mount flush.

[@fattahebrimatamba4922]

Good job bro

[@HawaiiDetailing]

Thanks a lot. Thanks for watching.

[@waynebeck7801]

What do you do with the long cord on the power washer?

[@HawaiiDetailing]

Roll it up and put it in the back in the open area on the PW.

[@johnquillen6417]

What did you do for the bolts on the backside of the plywood against the wall? Just drill our counter sink holes in the sheet rock.

[@HawaiiDetailing]

Yes that’s what we did. I prefer the method from my other video of my personal setup where I blocked out the studs behind the drywall to support everything. It’s much cleaner but requires more drywall work. There is also a hose reel mount that can span 16” to catch the studs as long as they are where you want the reel to be. It all depends on the level of construction you are comfortable with. Hope that helps. Let me know if you have any other questions. Thanks for watching.

[@ciprianion4142]

That small vac dosen’t lose a lot of power with that hose?

[@HawaiiDetailing]

No it actually works great. Thanks for watching

[@awno6627]

how efficient is the vacuum with the longer hose? im interested in that, but I have a driveway full of cars that are going to have me reach 30'

[@HawaiiDetailing]

It’s works great. I have had no noticeable loss of suction.

[@HALNSS]

Clean 🔥🔥

[@HawaiiDetailing]

Thanks

[@aaron30569]

How does he have the vacuum system set up? Is the vacuum always on and the switch does turns the power off and on?

[@HawaiiDetailing]

Yes. The wall outlet is controlled by the switch. When turned on the vac turns on.

[@jtr-fw5th]

Really clean install!!

[@HawaiiDetailing]

Thanks alot.

[@Yusufmasron]

I love it, so neat, and practicle

[@HawaiiDetailing]

Thanks. It’s a great kit.

[@antoniofrias729]

I would like to have a setup like this ( not including the vacuum part).How much would this cost in total?

[@jmorgan32355]

What did you do about the nuts and bolt sticking through the back and the Sheetrock? Did You have to account for those?

[@HawaiiDetailing]

We notched the drywall but you can also get some low profile cap style bots where this would be minimized. Thanks for watching and commenting

[@adamfletcher2315]

That little vacuum is powerful enough to run with that long hose??

[@HawaiiDetailing]

Yes it runs it well too. It’s a 5hp motor. I love my setup. If you were to upgrade from there it would have to be a $500 wall mounted vac to get any worth while performance improvements. Thanks for watching and commenting.

[@adamfletcher2315]

@@HawaiiDetailing yea that's a awesome set up.. I am jealous

[@ghc7910]

Any vid on how to spray paint the pressure washer cover plus I have the karcher 1700 with wheels do you prep area or just spray paint ?

[@HawaiiDetailing]

Shows me painting it here. kzbin.info/www/bejne/i3fInGRqr6mljNk Thanks for watching.

[@edwardroe1268]

How did you mount board on Sheetrock with the bolts sticking out the back for mounting brackets

[@HawaiiDetailing]

You can use bolts that have a flush head on them or knotch out the drywall.I recommend the zero clearance bolt heads. Thanks for watching

[@timpirtle3906]

What vacuum hose is that? Thanks for all the great videos!

[@HawaiiDetailing]

It comes on the reel

[@timpirtle3906]

Ah gotcha….OG!!

[@tom69821]

That looks great! The only thing that would annoy me if it was my garage would be the vaccuum cleaner on top of the storage cupboard. I’d probably try to get it inside and just run a wire to the plug instead.

[@HawaiiDetailing]

Yeah that was where he wanted it. He really likes it as it’s out of the way and easy to access to clean. Thanks for watching

[@billyw8186]

What cabinets are those he has mounted to the wall? My garage walls are recessed slightly from a concrete footing, so if I put a tall cabinet on the floor, it leaves a gap between its back and the wall, but the only tall cabinets I can find are floor standing ones that specifically say not to hang on the wall like these ones are. Thanks!

[@HawaiiDetailing]

I am not sure what type they are. They are from HD or Lowe’s. Thanks for watching.

[@koomafloo3461]

Only thing id change is the vac on the wall over the hose reel.

[@HawaiiDetailing]

Thanks for watching

[@lomaxmutumba5043]

I love it. ❤❤❤

[@slittcerslitt-sir7722]

Hey there I know this is a very old video but I'm looking for some guidance as I'm forced to use a 2x4 3/4" plywood to mount the same setup (active 2.0 instead of the karcher). I'm an extreme novice when it comes to home improvement so please forgive my lack of knowledge on this but I will be using the cox stainless steel wall plate for the cox reel that Obsessed Garage sells (using for looks) and it comes with 4 lag screws to get that in. Is there any reason you would still stick with the bolts/washer vs using lag screws to mount the cox hose reel steel plate? Would one be more durable over the other? Thank you!

[@HawaiiDetailing]

If I were using that mount I would screw the lag bolts into the 16” centered studs. If studs are not available a through bolt with washers is much stronger then a lag bolt when it comes to attaching a heavy item to plywood. Hope that helps.

[@slittcerslitt-sir7722]

@@HawaiiDetailing Gotcha! That's actually the reason for the plywood, unfortunately the condos here were built with metal studs 24" apart which I didn't bother to check until after I ordered the entire setup. Did you happen to have any issues with the through bolts sticking out the back hitting the drywall? Thank you for the quick response by the way. Hoping to get this on my wall today!

[@HawaiiDetailing]

@@slittcerslitt-sir7722 yes you have to use a Carriage bolt and possibly hammer out a small divot where the heads meet the drywall. Should only be a small divot just to allow it to sit flush. .

[@maynorgonzalez6766]

Nice 👍🏻 looks amazing 🤩

[@HawaiiDetailing]

Thanks for watching

[@avirexdeep3627]

When your pressure washer dies. You should look at the Ar630 tss (total stop) italian pressure washer.

[@HawaiiDetailing]

The AR is a good one. Thanks for watching.

[@toneloc79]

where did you get the vacuum wheel

[@HawaiiDetailing]

I have links so you can check it out in the description. Thanks for watching